Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
Median Price
$0.124
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.117
1k+ parts
10k+ parts
-
DigiKey
$0.250
$0.145
$0.114
Newark
$0.263
$0.165
$0.134
Element14
$0.267
$0.156
$0.133
PEI Genesis
NEP Electronics
Chip1Stop
$0.097
Master Electronics
$0.186
Verical
$0.099
Powell Electronics
$0.093
Farnell
$0.152
Mouser Electronics
$0.108
Interstate Connecting
$0.090
Digiode
$0.066
DF Sales Co.
$0.074
TestEquity
$0.100
Nova Conductors
$0.129
IBS Electronics
$0.092
Vyrian
Bristol Electronics
VNN
Semi Source
Semicontronic
$0.060
$0.058
Corphita
$0.063
Advanced Electronics
Aranea Global
$0.126
$0.121
Argo Parts USA
$0.125
Continental Prestige Electronics
$0.239
$0.105
Aztec Data Supply Inc.
$3.344
Andel Nordic
$5.711
$5.483
Assy Fe
Perfect Parts
ErreBi Group
Authorized Procurement Solutions
EMSNET (Excess)
Infinite Electronics LLP (Excess)
The product is compatible with a variety of housing series, providing versatility and the ability to be used in multiple applications.
The substantial finish thickness ensures durability and longevity of the product, making it reliable for long-term use.
The crimp terminal type allows for secure and stable connections, reducing the risk of loose connections or disconnections.
The chain contact design provides a reliable and continuous electrical connection, ensuring consistent performance and minimal disruptions.
The specified assembly item name indicates that this product is specifically designed for creating contact points, ensuring efficient and effective connectivity.
The ability to accommodate up to 16 AWG wire size allows for flexibility and compatibility with various wire types, making it suitable for a wide range of applications.
The female contact gender is commonly used for receiving pins or connectors, providing a standard and widely accepted configuration for easy integration and compatibility.
The straight mounting style simplifies installation and alignment, making it easy to incorporate the product into a variety of designs and setups.
The square pin-socket contact style offers a secure and stable connection, reducing the risk of poor contact or disconnections, ensuring consistent performance.
The use of phosphor bronze material provides excellent conductivity, durability, and corrosion resistance, ensuring a reliable and long-lasting product.
The specified terminal length allows for proper wire connectivity and a secure fit, ensuring stable connections and reliable performance.
Assembly Products 39-00-0217 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
39-00-0217 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Multiple Devices Production Location 01/Apr/2017
PCN Packaging - 390002yy 16/Aug/2018 Multiple Devices Packaging/Quantity 28/Oct/2019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Yangzhou Yangjie Electronics
Good-ark Electronics
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
183025-1
TE Connectivity
TE Connectivity's 183025-1 is a CRIMP terminal with a wire gauge range of 18 AWG to 15 AWG. It has a max operating temperature of 125°C and can handle a rated current of 14 A. This CONTACT assembly product, made of PHOSPHOR BRONZE, is commonly used in connectors for various applications.
593
Keystone Electronics
Keystone Electronics 593 CONTACT features FEMALE gender, RIGHT ANGLE mounting, and RND PIN-SKT style. Made of STEEL with 0.12" terminal length. Ideal for assembly products requiring SOLDER terminals in various applications.
967067-2
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG;
16-02-0077
Molex
CONNECTOR ACCESSORY;
DF13-2630SCFA(04)
Hirose Electric
DF13-2630SCFA(04) by Hirose Electric is a UL approved connector with crimp terminals for 30-26 AWG wires. It has a rated current of 1A and contact resistance of 30 mohm, suitable for signal applications at temperatures ranging from -35 to 85 °C.
5011937000
Molex 5011937000 is a PICO-CLASP CONNECTOR with CRIMP terminals. It has a rated current of 1.5A and can handle up to 50V AC/DC voltage. The contact material is PHOSPHOR BRONZE, suitable for wire sizes ranging from 32-28 AWG in straight mounting applications.
D20419-21
Itt Cannon
CONNECTOR ACCESSORY; Assembly Item Name: HARDWARE-MALE SCREWLOCK; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Material: STEEL;
5-160667-2
TE Connectivity 5-160667-2 is a FEMALE contact assembly product with 0.091-0.13 inch cable entry. It supports 15-20 AWG wire gauge, ideal for DISCRETE WIRE applications. Made of BRASS, it operates b/w -40 to 110 °C temperature range.
M23053/5-111-9
Sumitomo Electric Industries
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
12066614
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; DIN Conformity: NO; Maximum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .039 inch;
770854-3
TE Connectivity's 770854-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17 A, it is ideal for applications requiring female gender contacts with round pin-socket style in straight mounting.
5205817-1
TE Connectivity 5205817-1 is a hardware female screwlock for metal shell or all plastic connectors. It supports max wire size of 0 AWG, made of steel, and mounts with #4-40 UNC screws. Ideal for secure assembly in various applications.
1607376
Phoenix Contact
1534807-1
TE Connectivity's 1534807-1 BACKSHELL features 2 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it supports up to 0 AWG wire size with 0.433" max cable entry. Mounting options include SCREW and 14702 for versatile assembly needs.
08-70-0002
CONNECTOR ACCESSORY; Manufacturer Series: 5006;
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
1-66109-7
TE Connectivity 1-66109-7, a crimp terminal for CPC/G and M series connectors, features brass material, 24-26 AWG wire gauge compatibility, and 13A rated current. Ideal for power and signal applications with CSA/UL approvals and operating temperatures from -55 to 90°C.
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
13663718
Aptiv
181270-2
TE Connectivity's 181270-2 CONTACT features CRIMP terminal type, rated voltage of 40V, and wire gauge of 23 AWG. Ideal for SIGNAL applications with a max operating temperature of 80°C and contact resistance of 7 mΩ.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-00-0039
Molex 39-00-0039 CONTACT is a FEMALE CRIMP terminal with BRASS material. It supports wire sizes from 24 AWG to 18 AWG, with a finish thickness of 35 and 0.122 inch max cable entry. Ideal for applications requiring SQUARE PIN-SOCKET contact design such as connectors 5557, 30067, 44516 OR 42474.
39-00-0041
Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.
39-00-0040
Molex 39-00-0040 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.051-0.122 inch cable entry, and BRASS material. Ideal for 5559, 30068, 42475 SERIES HOUSING applications with SQUARE PIN-SOCKET contact design.
39-00-0380
Assembly Items;
39-00-0381
39-00-0078
Molex 39-00-0078 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications with wire size up to 16 AWG and cable entry of 0.122". Commonly used in assemblies for connectors like 5557, 30067, 44516 OR 42474.
39-00-0181
Molex 39-00-0181 is a power contact with square pin-socket design. It supports wire sizes from 24 to 18 AWG and has a finish thickness of 30. Ideal for use in housings like 5557, 30067, 44516, or 42474 with 0.051" to 0.122" cable entry.
39-00-0082
The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.
39-00-0059
Molex 39-00-0059 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Offers 0.051" min cable entry and 0.122" max cable entry for versatile use.
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
39-00-0077
The Molex 39-00-0077 is a contact assembly product with a crimp terminal type and chain contact design. It is commonly used with 5557, 30067, 44516, or 42474 connectors. With a max wire size of 16 AWG and a mounting style of straight, it is ideal for applications requiring reliable electrical connections.
39-00-0049
Molex 39-00-0049 contact features brass material, square pin-socket design, and crimp terminal type. Ideal for 5559, 30068, 42475 series housing applications with wire sizes ranging from 28 AWG to 22 AWG. Offers straight mounting style and 0.071 inch max cable entry for secure connections.
39-00-0060
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
39-00-0213
Molex 39-00-0213 is a crimp contact with square pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for use in various housing series like 5557, 30067, and more.
39-00-0047
CONNECTOR ACCESSORY; Terminal Type: CRIMP; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Contact Design: LOOSE; DIN Conformity: NO;
39-00-0081
Molex 39-00-0081 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing applications with max wire size of 16 AWG and 0.122" cable entry.
39-00-0079
CONNECTOR ACCESSORY; Maximum Wire Size: 16 AWG; Contact Style: SQUARE PIN-SOCKET; Mounting Style: STRAIGHT; Material: PHOSPHOR BRONZE; Terminal Type: CRIMP;
39-00-0264
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Wire Size: 30 AWG; Maximum Wire Size: 28 AWG; Contact Gender: MALE; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved