Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
Median Price
$3.810
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$2.400
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.710
$2.290
$2.070
$1.970
Interstate Connecting
$6.030
$4.960
$4.660
DigiKey
$7.070
$5.106
$4.340
Newark
$7.550
$5.970
$5.590
RS (Exports)
$7.700
$6.280
$5.930
Master Electronics
$5.600
$5.390
$5.360
Arrow
$3.773
Verical
TTI Europe
$3.151
$3.031
Future Electronics
$3.670
Nova Conductors
$2.695
Electro Sonic
$4.280
$3.360
$2.750
$2.630
TME
$5.880
$4.480
$4.190
VNN
IBS Electronics
$5.091
$5.021
Vyrian
Rutronik
$2.520
$2.380
Amar Radio Corporation
NAC Semi
$5.370
$4.950
ICP Electronique
Q Components
J2 Sourcing AB
Ampacity Inc.
$2.040
Argo Parts USA
Aztec Data Supply Inc.
$2.940
Continental Prestige Electronics
$2.950
$2.460
$2.310
Allen Electronics Distributors
$3.770
Perfect Parts
Netroflash
$2.641
$2.560
$2.506
Abacus Technologies
Having UL approval ensures that this product meets safety and quality standards, giving you peace of mind when using it.
The minimum cable entry of 0.157 inch allows for flexibility in cable size, making it compatible with a variety of cables and connectors.
With a maximum operating temperature of 120°C, this product can withstand high temperatures, making it suitable for use in various environments.
The minimum operating temperature of -40°C ensures that this product can perform reliably even in extremely cold conditions.
The assembly item name 'HOOD' indicates that this product is specifically designed for providing protection and covering for connectors and cables, enhancing their durability and longevity.
The maximum cable entry of 0.512 inch allows for accommodating larger cables and connectors, making it versatile for various applications.
Being made of zinc alloy, this product combines the strength of zinc with the lightweight properties of alloy, providing durability and resistance to corrosion.
The mounting option of JACKSCREW ensures secure attachment, preventing any accidental disconnections and ensuring reliable performance.
The mounting option of UNC 4.40 indicates compatibility with standard UNC screw sizes, making installation quick and easy.
Assembly Products 8655MH1501BLF attributes and parameters. Explore more Assembly Products devices from Amphenol Icc
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
8655MH1501BLF Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Boca Semiconductor
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
EU2B-YS303C
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
First Components International
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2-964269-2
TE Connectivity
CONNECTOR ACCESSORY;
1418884-3
TE Connectivity's 1418884-3 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 13 A. Ideal for applications requiring a female contact, with cable entry ranging from 0.074" to 0.094".
W4S-P012
TE Connectivity's W4S-P012 is an Assembly Product with -55 to 125°C operating range. It supports up to 0 AWG wire, designed for power and signal applications using Polybutylene Terephthalate material.
1-2308340-5
TE Connectivity 1-2308340-5 is an Assembly Product with shielding, operating from -40 to 90°C. Made of ZINC ALLOY, it supports wire sizes up to 0 AWG. Mounting options include SCREW and #4-40 UNC, ideal for various industrial applications.
SK14
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Material: STEEL; Assembly Item Name: CLAMPING ITEM; Maximum Cable Entry: .551 inch; DIN Conformity: NO; Mounting Option-1: M4;
M23053/5-103-9
Brady
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
G125-0010005
Harwin Plc
G125-0010005 by Harwin PLC is a female contact with round pin-socket style, made of beryllium copper. It has a rated current of 2.8A and can handle up to 450V AC/DC voltage. With a terminal length of 0.079 inch, it is ideal for signal applications requiring crimp terminals in assemblies with 0.031 inch cable entry.
794606-1
TE Connectivity's 794606-1 CONTACT features stranded construction, crimp terminal type, and a rated voltage of 250V. Ideal for discrete wire applications with a wire gauge range from 24 to 20 AWG. Suitable for power design with approvals from CSA, UL, and VDE.
500798020
Molex
The Molex 500798020 assembly product features UL approval, crimp terminal type, and a max operating temperature of 105°C. It is used for the 51021 HOUSING application with contact design CHAIN and rated AC voltage of 125V.
880810-1
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: BOOT; Maximum Wire Size: 0 AWG;
33012-2001
The Molex 33012-2001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with operating temperatures from -40 to 105 °C. It supports wire sizes from 16 to 14 AWG, rated at 22A and 500V DC. The FEMALE contact has a resistance of 8 mohm, made of COPPER ALLOY for STRAIGHT mounting applications.
1-205089-1
TE Connectivity's 1-205089-1 CONTACT is a CRIMP terminal with operating temperatures from -55 to 125 °C. It supports wire gauges from 24 to 20 AWG, rated for 7.5A current. Ideal for SIGNAL applications, featuring MALE gender and RND PIN-SKT design in COPPER ALLOY material.
281934-2
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
1731110062
Molex 1731110062 is a zinc alloy backshell for FCT D-SUB size 3 connectors. It can operate in temperatures ranging from -35°C to 100°C. Mounting options include #4-40 screws, making it ideal for industrial applications.
RC16M23K
Souriau-sunbank Connection Technologies
RC16M23K by Souriau-sunbank is a CRIMP terminal CONTACT with MACHINED design for 750V AC, 13A current. It's used in RC/RM SERIES CONNECTOR for SIGNAL applications, accepting wire sizes from 30-14 AWG and COAXIAL cables up to 3.2".
13711546
Aptiv
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
828905-1
TE Connectivity 828905-1 CONTACT features CRIMP terminal type, 0.0866" min cable entry, and -40 to 130°C operating temp. Ideal for STRAIGHT mounting with 0 AWG wire size, it's used in various assembly applications.
64325-1023
CONNECTOR ACCESSORY; Assembly Item Name: SEALING ITEM; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 64318, 64319, 64320, 64321;
0473460001
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 100 Cel; Material: PA66; DIN Conformity: NO; MIL Conformity: NO;
13663727
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8655MH0901BLF
Amphenol Communications Solutions
Amphenol's 8655MH0901BLF HOOD features UL approval, zinc alloy material, and a temperature range of -40 to 120°C. With cable entries from 0.157" to 0.512", it is ideal for secure mounting with UNC 4.40 jackscrews in various assembly applications.
8655MH0911LF
Amphenol Icc
Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.
8655MH1511LF
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Mounting Option-1: #4-40; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC;
8655DMES2B13KLF
CONNECTOR ACCESSORY; Mounting Option-1: #4-40 UNC; MIL Conformity: NO; Assembly Item Name: HOOD; Maximum Operating Temperature: 120 Cel; Mounting Option-2: SCREW;
8655MH2511LF
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; IEC Conformity: NO; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO;
8655MH3701BLF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Mounting Option-1: UNC 4.40; IEC Conformity: NO; Maximum Cable Entry: .512 inch; Minimum Cable Entry: .157 inch;
8655MH3701BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Minimum Cable Entry: .157 inch;
8655MH2501BLF
Amphenol Icc's 8655MH2501BLF is a UL-approved hood assembly product made of zinc alloy. It has a min operating temperature of -40°C and a max operating temperature of 120°C. With mounting options like jackscrew and UNC 4.40, it accommodates cable entries ranging from 0.157" to 0.512", making it ideal for various industrial applications.
8655MH2501LF
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC ALLOY; Mounting Option-2: SCREW; DIN Conformity: NO;
86557-6
CONNECTOR ACCESSORY; Rated Current: 2 A; Cable Types: DISCRETE WIRE; Assembly Item Name: CONTACT; Wire Gauge (AWG): 22; Mounting Style: STRAIGHT;
8655MHRA0901LF
8655MHRA0901LF by Amphenol Icc is a UL-approved D-SUB connector backshell. It has a min cable entry of 0.157" and a max cable entry of 0.512". Made of zinc alloy, it can withstand temperatures ranging from -40°C to 120°C.
8655MH2501BKLF
CONNECTOR ACCESSORY; Maximum Cable Entry: .512 inch; IEC Conformity: NO; MIL Conformity: NO; Mounting Option-1: UNC 4.40; Minimum Operating Temperature: -40 Cel;
86557-4
CONNECTOR ACCESSORY; Rated Current: 2 A; Assembly Item Name: CONTACT; Contact Gender: MALE; Minimum Cable Entry: .04 inch; Finish Thickness: 30;
8655MHRA5001LF
CONNECTOR ACCESSORY; Usage: D-SUB CONNECTOR; Maximum Cable Entry: .512 inch; IEC Conformity: NO; DIN Conformity: NO; Minimum Cable Entry: .157 inch;
8655MH0901BKLF
Amphenol Icc's 8655MH0901BKLF hood assembly product has UL approval, zinc alloy material, and a temperature range of -40 to 120°C. It features jackscrew mounting options and accommodates cable entries from 0.157" to 0.512". Ideal for applications requiring secure cable management in various environments.
8655MHRA1501LF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Usage: D-SUB CONNECTOR; Maximum Operating Temperature: 120 Cel; IEC Conformity: NO; Material: ZINC ALLOY;
8655MH1501BKLF
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; Minimum Cable Entry: .157 inch; DIN Conformity: NO; IEC Conformity: NO; Maximum Cable Entry: .512 inch;
8655MH1502BKLF
CONNECTOR ACCESSORY; Mounting Option-1: M3; Mounting Option-2: JACKSCREW; Minimum Operating Temperature: -40 Cel; Maximum Cable Entry: .512 inch; Assembly Item Name: HOOD;
8655MH1502BLF
CONNECTOR ACCESSORY; IEC Conformity: NO; Approvals (V): UL; Assembly Item Name: HOOD; MIL Conformity: NO; DIN Conformity: NO;
8655MH150B1LF
CONNECTOR ACCESSORY; Minimum Cable Entry: .157 inch; Maximum Cable Entry: .472 inch; Mounting Option-2: SCREW; Minimum Operating Temperature: -40 Cel; Usage: D-SUB CONNECTOR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved