Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
Median Price
$0.143
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.225
100+ parts
-
1k+ parts
$0.172
10k+ parts
$0.139
Arrow
$0.269
$0.104
TTI
$0.088
Mouser Electronics
$0.120
Waytek Inc.
$0.099
Verical
Master Electronics
$0.117
TTI Europe
$0.121
Newark
$0.211
$0.150
$0.116
RS (Exports)
$0.153
BTC Electronics
NEP Electronics
$0.180
DF Sales Co.
$0.080
CustomConnectorKits
$0.100
Freelance Electronics
Nova Conductors
$0.234
Hutch & Son
$0.360
FDH Electronics
$0.384
$0.229
$0.222
IBS Electronics
$0.164
Electro Sonic
$0.176
$0.105
Vyrian
Amar Radio Corporation
Cyclops Electronics Ltd
VNN
Diverse Electronics
ABC Electronics Ltd.
Elcom Components
Q Components
Bristol Electronics
Bisco
J2 Sourcing AB
NAC Semi
EMSNET
Resion
Semicontronic
$0.089
$0.087
$0.086
Argo Parts USA
$0.226
Netroflash
Aztec Data Supply Inc.
$2.078
Corohmni
$3.726
Advanced Electronics
$6.008
$5.708
Perfect Parts
EMSNET (Excess)
Allen Electronics Distributors
$0.135
$0.128
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
Assy Fe
Continental Prestige Electronics
$0.161
$0.126
$0.102
Modulus Dynamics
Crimp terminals provide a secure and reliable connection, ensuring the cable stays in place and prevents electrical interference.
The minimum cable entry size allows for compatibility with a variety of cables, offering flexibility in usage.
Specialized contacts ensure optimal conductivity and performance, enhancing the overall functionality of the assembly product.
Designed to work with FLRY-B cables, which are commonly used in automotive applications due to their durability and resistance to heat and chemicals.
The maximum cable entry size provides compatibility with larger cables, accommodating a wide range of cable sizes for various applications.
Made from brass, a durable and conductive material that offers excellent electrical conductivity and corrosion resistance, ensuring longevity and reliability.
Assembly Products 12089040 attributes and parameters. Explore more Assembly Products devices from Aptiv
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Terminal Type:
12089040 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
NSN
5935-01-610-4237, 5935016104237, 5940-01-234-7272, 5940012347272, 5940-01-644-0062, 5940016440062
NIIN
016104237, 012347272, 016440062
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Digitron Semiconductors
Semitronics
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductor Technology
0460-204-0490
TE Connectivity
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
39-00-0213
Molex
Molex 39-00-0213 is a crimp contact with square pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for use in various housing series like 5557, 30067, and more.
0-0281934-4
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
1SNK908310R0000
TE Connectivity's 1SNK908310R0000 is an Assembly Product with POLYAMIDE insulator. It operates b/w -55 to 110 °C, rated at 600V AC/DC and handles up to 57A current. Ideal for applications requiring secure wire connections up to 0 AWG size in various industries.
222-500
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: MOUNTING ITEM;
SPH-002T-P0.5S
J S T Mfg
SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.
1SNK900101R0000
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
0462-201-20141
TE Connectivity's 0462-201-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 20 AWG wires at 7.5 A current. Ideal for POWER applications requiring FEMALE ROUND PIN-SOCKET contacts.
316400-1
TE Connectivity 316400-1 CONTACT features crimp terminal type, rated 3A current at 50V DC voltage. With a finish thickness of 7.87mm, it is ideal for signal design applications with wire gauge ranging from 20 to 22 AWG.
MTCB2X-205-XXX
TE Connectivity's MTCB2X-205-XXX is an Assembly Product with a max operating temp of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, designed for ROUND WIRE applications with MALE contact gender using POLYARYLENE/POLYETHYLENE material.
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
4-1437284-3
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
FMK1G
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
M83513/05-07
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
DTP06-2S-C017
TE Connectivity's DTP06-2S-C017 is a FEMALE power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for applications requiring high-power transmission in harsh environments.
1731110062
Molex 1731110062 is a zinc alloy backshell for FCT D-SUB size 3 connectors. It can operate in temperatures ranging from -35°C to 100°C. Mounting options include #4-40 screws, making it ideal for industrial applications.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
1053002300
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
7-1452668-3
TE Connectivity's 7-1452668-3 is a CRIMP terminal with a wire gauge range of 20-18 AWG and a cross-section area of 0.75 mm2. It can handle temperatures from -40 to 150 °C and has a rated current of 16 A. This female contact design is commonly used in assembly products.
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12089188
Delphi Connection Systems
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
Aptiv
Aptiv 12089188 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it allows cable entry from 0.067 to 0.075 inch. Ideal for assembly products requiring precise crimping on automotive wiring harnesses.
12089040
12089290
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP; Cable Types: DT3LH; Maximum Cable Entry: .063 inch;
Aptiv's 12089290 CONTACT features CRIMP terminal type for DT3LH cables. Made of COPPER ALLOY, it supports cable entries from 0.051" to 0.063". Ideal for assembly products requiring precise crimping on specified cable types.
12084912
CONNECTOR ACCESSORY; Rated Current: 7 A; Contact Style: ROUND PIN-SOCKET; Contact Gender: FEMALE; DIN Conformity: NO; Maximum Cable Entry: .08 inch;
CONNECTOR ACCESSORY; Rated Current: 7 A; Mounting Style: STRAIGHT; MIL Conformity: NO; Terminal Type: CRIMP; Material: PHOSPHOR BRONZE;
12084200
Aptiv 12084200 CONTACT for FLRY-B cables, CRIMP terminal type, made of BRONZE. Suitable for cables with 0.055-0.063 inch entry. Ideal for Assembly Products applications.
CONNECTOR ACCESSORY; Minimum Cable Entry: .055 inch; Assembly Item Name: CONTACT; Cable Types: FLRY-B; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO;
12084913
CONNECTOR ACCESSORY; Rated Current: 7 A; DIN Conformity: NO; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .379 inch;
CONNECTOR ACCESSORY; Rated Current: 7 A; DIN Conformity: NO; Maximum Cable Entry: .076 inch; Contact Gender: FEMALE; Terminal Length: .379 inch;
1208018
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1208018;
1208131
TERMINAL BLOCK ACCESSORY;
1208600000
Weidmueller & Kg
CONNECTOR ACCESSORY;
1208869
1208131/374.52
TERMINAL BLOCK ACCESSORY; Approvals (V): EN; IEC; Material: STEEL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO;
1208160
1208872
1208092
12089307
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; IEC Conformity: NO; Terminal Type: CRIMP; Assembly Item Name: CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved