Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 8655MH2501LF is a ZINC ALLOY HOOD with #4-40 UNC SCREW mounting. It operates b/w -55°C to 125°C, making it suitable for extreme temperature environments. Ideal for applications requiring durable and secure assembly products.
Median Price
$7.816
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$6.521
100+ parts
$5.796
1k+ parts
$5.351
10k+ parts
-
Mouser Electronics
$7.820
$6.440
$5.690
Element14
$8.372
$7.068
$6.638
$6.031
DigiKey
$9.570
$7.904
$6.448
$5.699
Newark
$13.480
$11.610
$10.730
TTI
$15.810
$14.550
$14.240
$14.090
TTI Europe
$5.962
$5.810
Master Electronics
$6.010
$5.800
$5.520
PEI Genesis
Verical
$7.813
$7.579
Chip1Stop
$5.780
Nova Conductors
$5.651
Vyrian
VNN
IBS Electronics
$13.314
$12.740
$12.670
Rapid Electronics
Electro Sonic
$6.190
$5.970
TME
$6.539
Ampacity Inc.
$4.910
Continental Prestige Electronics
$5.538
Argo Parts USA
Perfect Parts
Netroflash
$5.369
$5.256
Ability to withstand high temperatures makes this product suitable for a wide range of industrial applications.
Can function effectively even in extremely low temperatures, ensuring reliability in various environments.
The specific design and purpose of the assembly item make it ideal for enclosing and protecting components within a system.
Zinc alloy offers a good balance of strength and corrosion resistance, making the product durable and suitable for long-term use.
The screw mounting option provides a secure way to attach the product, ensuring stability and ease of installation.
Compliance with #4-40 UNC standards ensures compatibility with commonly used screws, facilitating installation and maintenance.
Assembly Products 8655MH2501LF attributes and parameters. Explore more Assembly Products devices from Amphenol Communications Solutions
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
45750-1112
Molex
45750-1112 by Molex is a crimp contact with copper alloy material. It supports wire sizes from 20 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications with 5557, 30067, 43760, 44516, and 42474 series housings.
5011937000
Molex 5011937000 is a PICO-CLASP CONNECTOR with CRIMP terminals. It has a rated current of 1.5A and can handle up to 50V AC/DC voltage. The contact material is PHOSPHOR BRONZE, suitable for wire sizes ranging from 32-28 AWG in straight mounting applications.
9028240000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;
030-1952-000
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Rated Current: 5 A; Rated AC Voltage: 1000 V; Mounting Style: STRAIGHT; Maximum Operating Temperature: 125 Cel; Design: SIGNAL;
2002-404
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
5016471000
Molex 5016471000 is an IGRID receptacle housing with stamped contact design. It supports wire sizes from 26-22 AWG, rated for 250V AC/DC and 2A current. Ideal for signal applications, featuring copper alloy material and straight mounting style.
39-00-0073
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
DTM06-3S-C017
TE Connectivity
TE Connectivity's DTM06-3S-C017 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, ideal for POWER AND SIGNAL applications. With an operating temperature range of -55°C to 125°C, it ensures reliable performance in various environments.
DF11-2428SCF
Hirose Electric
CONNECTOR ACCESSORY;
WM-6S
TE Connectivity's WM-6S is a power and signal assembly item designed for DTM SERIES. With a temp range of -55 to 125°C, it accommodates wires up to 0 AWG using polybutylene terephthalate material. Ideal for various applications requiring robust wire connections.
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
1SET111009R0000
TE Connectivity's 1SET111009R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
13697415
Aptiv
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
DF13-2630SCFA(81)
CONNECTOR ACCESSORY; Manufacturer Series: DF13;
5-1532137-9
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
967067-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
M24308/25-9F
CONNECTOR ACCESSORY; DIN Conformity: NO; Mounting Option-2: SCREW; MIL-Connector Accessory Name: SCREW ITEM; IEC Conformity: NO; Usage: M24308 SERIES CONNECTOR;
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8655MH0901BLF
Amphenol Communications Solutions
Amphenol's 8655MH0901BLF HOOD features UL approval, zinc alloy material, and a temperature range of -40 to 120°C. With cable entries from 0.157" to 0.512", it is ideal for secure mounting with UNC 4.40 jackscrews in various assembly applications.
8655MH1501BLF
Amphenol Icc
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
8655MH0911LF
Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.
8655MH1511LF
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Mounting Option-1: #4-40; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC;
8655DMES2B13KLF
CONNECTOR ACCESSORY; Mounting Option-1: #4-40 UNC; MIL Conformity: NO; Assembly Item Name: HOOD; Maximum Operating Temperature: 120 Cel; Mounting Option-2: SCREW;
8655MH2511LF
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; IEC Conformity: NO; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO;
8655MH3701BLF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Mounting Option-1: UNC 4.40; IEC Conformity: NO; Maximum Cable Entry: .512 inch; Minimum Cable Entry: .157 inch;
8655MH3701BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Minimum Cable Entry: .157 inch;
8655MH2501BLF
Amphenol Icc's 8655MH2501BLF is a UL-approved hood assembly product made of zinc alloy. It has a min operating temperature of -40°C and a max operating temperature of 120°C. With mounting options like jackscrew and UNC 4.40, it accommodates cable entries ranging from 0.157" to 0.512", making it ideal for various industrial applications.
86557-6
CONNECTOR ACCESSORY; Rated Current: 2 A; Cable Types: DISCRETE WIRE; Assembly Item Name: CONTACT; Wire Gauge (AWG): 22; Mounting Style: STRAIGHT;
8655MHRA0901LF
8655MHRA0901LF by Amphenol Icc is a UL-approved D-SUB connector backshell. It has a min cable entry of 0.157" and a max cable entry of 0.512". Made of zinc alloy, it can withstand temperatures ranging from -40°C to 120°C.
8655MH2501BKLF
CONNECTOR ACCESSORY; Maximum Cable Entry: .512 inch; IEC Conformity: NO; MIL Conformity: NO; Mounting Option-1: UNC 4.40; Minimum Operating Temperature: -40 Cel;
86557-4
CONNECTOR ACCESSORY; Rated Current: 2 A; Assembly Item Name: CONTACT; Contact Gender: MALE; Minimum Cable Entry: .04 inch; Finish Thickness: 30;
8655MHRA5001LF
CONNECTOR ACCESSORY; Usage: D-SUB CONNECTOR; Maximum Cable Entry: .512 inch; IEC Conformity: NO; DIN Conformity: NO; Minimum Cable Entry: .157 inch;
8655MH0901BKLF
Amphenol Icc's 8655MH0901BKLF hood assembly product has UL approval, zinc alloy material, and a temperature range of -40 to 120°C. It features jackscrew mounting options and accommodates cable entries from 0.157" to 0.512". Ideal for applications requiring secure cable management in various environments.
8655MHRA1501LF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Usage: D-SUB CONNECTOR; Maximum Operating Temperature: 120 Cel; IEC Conformity: NO; Material: ZINC ALLOY;
8655MH2502BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; IEC Conformity: NO; MIL Conformity: NO; Minimum Cable Entry: .157 inch; Maximum Cable Entry: .512 inch;
8655MH2502BLF
CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; Material: ZINC ALLOY; MIL Conformity: NO; Assembly Item Name: HOOD; Minimum Cable Entry: .157 inch;
8655MH2502LF
CONNECTOR ACCESSORY; Material: ZINC; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel;
8655MH2511
Fci
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO; MIL Conformity: NO; Mounting Option-1: #4-40 UNC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved