Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
8655MH3701BLF by Amphenol Icc is a UL-approved HOOD assembly product made of ZINC ALLOY. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 JACKSCREW mounting with cable entries up to 0.512".
Median Price
$6.871
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$6.290
100+ parts
$4.455
1k+ parts
$3.720
10k+ parts
-
Element14
$5.337
$4.069
$3.870
Farnell
$6.959
$4.720
$3.922
TTI
$8.970
$6.610
DigiKey
$9.810
$7.089
$6.027
Newark
$10.130
$7.790
$7.500
Verical
$6.460
$5.859
$5.691
Master Electronics
$6.310
$5.670
$5.660
Powell Electronics
$6.270
Nova Conductors
$4.518
FDH Electronics
$7.378
$5.929
$5.533
$5.355
VNN
Amar Radio Corporation
Electro Sonic
$4.920
$3.880
$3.670
IBS Electronics
$7.314
$6.990
$6.955
Vyrian
Argo Parts USA
Netroflash
$4.292
$4.202
Continental Prestige Electronics
$5.870
$4.300
$3.760
Perfect Parts
Having UL approval ensures that the product meets safety standards and can be trusted for use in various applications.
The minimum cable entry size allows for flexibility in cable sizes ensuring compatibility with a range of cables.
The high maximum operating temperature makes this product suitable for use in environments where temperatures can reach higher levels.
The low minimum operating temperature ensures that the product can still function effectively in cold environments.
Zinc alloy provides durability and resistance to corrosion, making this product long-lasting and suitable for various conditions.
The hood design can provide additional protection and shielding for cables and connectors, enhancing the overall safety and performance of the assembly.
The maximum cable entry size allows for accommodating larger cables, providing versatility in usage.
The UNC 4.40 mounting option ensures easy and secure installation of the product, making it convenient for users.
The jackscrew mounting option adds additional stability and security to the installation process, ensuring a reliable connection.
Assembly Products 8655MH3701BLF attributes and parameters. Explore more Assembly Products devices from Amphenol Icc
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
8655MH3701BLF Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148WT
Diotec Semiconductor Ag
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SPH-002T-P0.5L
J S T Mfg
SPH-002T-P0.5L by J S T Mfg is a PAD SERIES CONNECTOR with CRIMP terminals, rated for 3A at 250V AC/DC. It has a contact resistance of 20 mohm and operates b/w -25°C to 85°C. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 28 AWG to 24 AWG.
SYM-001T-P0.6
SYM-001T-P0.6 by J S T Mfg is a UL approved RCY CONNECTOR with CRIMP terminals. It supports 3A current, rated for 250V AC/DC, and has contact resistance of 20 mohm. Ideal for applications requiring male contacts, it accommodates wire sizes from 28 to 22 AWG with operating temperatures ranging from -25 to 85 °C.
08-56-0110
Molex
Molex 08-56-0110 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for STRAIGHT mounting in Assembly Products applications.
08-70-1031
Molex 08-70-1031 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 0.051-0.126 inch cable entry with wire sizes ranging from 24-18 AWG. Suitable for straight mounting in assembly products.
16-02-0108
CONNECTOR ACCESSORY;
3022218
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END CLAMP; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO;
7-1452668-3
TE Connectivity
TE Connectivity's 7-1452668-3 is a CRIMP terminal with a wire gauge range of 20-18 AWG and a cross-section area of 0.75 mm2. It can handle temperatures from -40 to 150 °C and has a rated current of 16 A. This female contact design is commonly used in assembly products.
M23053/5-111-9
Alpha Wire
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO;
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
1534805-1
TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.
208680-1
TE Connectivity 208680-1 is a UL approved RECEPTACLE with Shell Sizes of 23. It operates b/w -55°C to 105°C, accommodating wire sizes up to 0 AWG. Made of POLYETHYLENE, it's ideal for CAP ITEM assembly applications.
2002-404
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
963293-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
7229
Keystone Electronics
AWM-12S
Amphenol
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
685030101
0800886
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8655MH0901BLF
Amphenol Communications Solutions
Amphenol's 8655MH0901BLF HOOD features UL approval, zinc alloy material, and a temperature range of -40 to 120°C. With cable entries from 0.157" to 0.512", it is ideal for secure mounting with UNC 4.40 jackscrews in various assembly applications.
8655MH1501BLF
Amphenol Icc
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
8655MH0911LF
Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.
8655MH1511LF
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Mounting Option-1: #4-40; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC;
8655DMES2B13KLF
CONNECTOR ACCESSORY; Mounting Option-1: #4-40 UNC; MIL Conformity: NO; Assembly Item Name: HOOD; Maximum Operating Temperature: 120 Cel; Mounting Option-2: SCREW;
8655MH2511LF
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; IEC Conformity: NO; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO;
8655MH3701BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Minimum Cable Entry: .157 inch;
8655MH2501BLF
Amphenol Icc's 8655MH2501BLF is a UL-approved hood assembly product made of zinc alloy. It has a min operating temperature of -40°C and a max operating temperature of 120°C. With mounting options like jackscrew and UNC 4.40, it accommodates cable entries ranging from 0.157" to 0.512", making it ideal for various industrial applications.
8655MH2501LF
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC ALLOY; Mounting Option-2: SCREW; DIN Conformity: NO;
86557-6
CONNECTOR ACCESSORY; Rated Current: 2 A; Cable Types: DISCRETE WIRE; Assembly Item Name: CONTACT; Wire Gauge (AWG): 22; Mounting Style: STRAIGHT;
8655MHRA0901LF
8655MHRA0901LF by Amphenol Icc is a UL-approved D-SUB connector backshell. It has a min cable entry of 0.157" and a max cable entry of 0.512". Made of zinc alloy, it can withstand temperatures ranging from -40°C to 120°C.
8655MH2501BKLF
CONNECTOR ACCESSORY; Maximum Cable Entry: .512 inch; IEC Conformity: NO; MIL Conformity: NO; Mounting Option-1: UNC 4.40; Minimum Operating Temperature: -40 Cel;
86557-4
CONNECTOR ACCESSORY; Rated Current: 2 A; Assembly Item Name: CONTACT; Contact Gender: MALE; Minimum Cable Entry: .04 inch; Finish Thickness: 30;
8655MHRA5001LF
CONNECTOR ACCESSORY; Usage: D-SUB CONNECTOR; Maximum Cable Entry: .512 inch; IEC Conformity: NO; DIN Conformity: NO; Minimum Cable Entry: .157 inch;
8655MH0901BKLF
Amphenol Icc's 8655MH0901BKLF hood assembly product has UL approval, zinc alloy material, and a temperature range of -40 to 120°C. It features jackscrew mounting options and accommodates cable entries from 0.157" to 0.512". Ideal for applications requiring secure cable management in various environments.
8655MHRA1501LF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Usage: D-SUB CONNECTOR; Maximum Operating Temperature: 120 Cel; IEC Conformity: NO; Material: ZINC ALLOY;
8655MH3702BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Maximum Cable Entry: .512 inch; Mounting Option-1: M3; MIL Conformity: NO; DIN Conformity: NO;
8655MH3702BLF
CONNECTOR ACCESSORY; DIN Conformity: NO; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -40 Cel; Material: ZINC ALLOY;
8655MH370B1LF
CONNECTOR ACCESSORY; Mounting Option-1: #4-40 UNC; DIN Conformity: NO; Assembly Item Name: HOOD; Usage: D-SUB CONNECTOR; Minimum Cable Entry: .157 inch;
8655MHRA2501LF
CONNECTOR ACCESSORY; Approvals (V): UL; Mounting Option-2: SCREW; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -40 Cel; Usage: D-SUB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved