Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol Icc's 8655MHRA1501LF is a UL-approved D-SUB CONNECTOR BACKSHELL with 0.157" to 0.512" cable entry, made of ZINC ALLOY. It operates b/w -40°C to 120°C and mounts using #4-40 UNC screws.
Median Price
$6.850
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.720
100+ parts
-
1k+ parts
10k+ parts
Avnet
$5.974
$5.526
RS Americas
$6.750
$5.200
$4.590
Farnell
$6.950
$4.890
$4.240
TTI
$8.200
$5.520
$5.390
Mouser Electronics
$8.670
$6.840
$5.810
Newark
$9.200
$7.360
$6.930
DigiKey
$9.470
$6.841
$5.816
RS (Exports)
$9.660
$7.870
$7.440
Element14
$11.570
$8.360
$7.110
Arrow
$5.829
$5.600
Verical
$5.864
$5.634
Master Electronics
$6.670
$5.670
$5.650
Powell Electronics
$5.750
VNN
Vyrian
TME
Nova Conductors
IBS Electronics
$5.668
$5.525
$5.473
Electro Sonic
$4.010
$3.860
$3.820
Allen Electronics Distributors
$5.540
$4.330
Perfect Parts
Abacus Technologies
Netroflash
Eastek
Having UL approval ensures that this product meets safety and quality standards, giving you peace of mind when using it in your assembly projects.
Designed specifically for D-SUB connectors, this product provides a reliable and secure connection for your electronic components.
With a minimum cable entry size of 0.157 inches, this backshell can accommodate a wide range of cable sizes, making it versatile for various assembly applications.
The high maximum operating temperature of 120°C ensures that this backshell can withstand heat and perform reliably in demanding environments.
The low minimum operating temperature of -40°C allows this backshell to function effectively even in extremely cold conditions, enhancing its durability and versatility.
The backshell design of this product helps to protect and secure cable connections, reducing the risk of damage or disconnection in your assemblies.
With a maximum cable entry size of 0.512 inches, this backshell can accommodate larger cables, offering flexibility in your assembly designs.
Constructed from zinc alloy, this backshell provides durability and corrosion resistance, ensuring a long-lasting and reliable connection for your assemblies.
The screw mounting option allows for secure and easy installation of this backshell, making it convenient to use in your assembly projects.
The #4-40 UNC mounting option provides compatibility with standard screw sizes, making installation straightforward and hassle-free.
Assembly Products 8655MHRA1501LF attributes and parameters. Explore more Assembly Products devices from Amphenol Icc
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Maximum Operating Temperature:
Minimum Operating Temperature:
Usage:
8655MHRA1501LF Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Jackscrew Plastic/Metal 10/Feb/2011
Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile Consumer Products, RF, Optical, Broadband and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment and automotive.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitachi
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Grande Electronics
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1-1102771-6
TE Connectivity
CONNECTOR ACCESSORY;
DF11-22SCA
Hirose Electric
12089040
Aptiv
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
350218-1
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
1053002200
Molex
Molex 1053002200 is a NANO-FITTM receptacle housing with 15 finish thickness. It features crimp terminal type, rated for 300V AC and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with female contact gender and compression style.
12124075
Aptiv's 12124075 CONTACT features FEMALE gender, CRIMP terminal type, and 0.079-0.094 inch cable entry. Ideal for STRAIGHT mounting in Assembly Products, with COMPRESSION contact style and 0.224" terminal length.
AW3S
Amphenol
221-503/000-004
Wago
TERMINAL BLOCK ACCESSORY;
W6S
The TE Connectivity W6S is an assembly product designed for the DT SERIES, with a max operating temp of 125°C and min of -55°C. It features a max wire size of 0 AWG, made from polybutylene terephthalate for power and signal applications. Ideal for various industries requiring high-quality electrical connections.
4-745130-5
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
16-02-0115
Molex 16-02-0115 CONTACT features CRIMP terminals, suitable for 24-22 AWG wires. With a rated current of 3A and contact resistance of 15 mohm, it is ideal for applications requiring male connectors with SQUARE PIN-SOCKET style contacts. Operating temperature ranges from -40 to 120 °C.
5-1393561-7
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
64325-1010
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; Usage: 64318, 64319, 64320, 64321; DIN Conformity: NO;
50212-8000
The Molex 50212-8000 CONTACT is a female assembly product with rated AC/DC voltage of 125V, current of 3A, and contact resistance of 10mohm. It supports wire sizes from 30 to 24 AWG and operates in temperatures ranging from -40 to 105 °C. Ideal for applications requiring reliable electrical connections in various industries.
114017
TE Connectivity 114017 is a male contact sealing item designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG in thermoplastic material. Ideal for assembly products requiring reliable connections in various environments.
1-794606-1
TE Connectivity 1-794606-1 is a stranded crimp terminal with a rated voltage of 250V and a max operating temperature of 105°C. It is commonly used in power applications, with approvals from CSA, UL, and VDE.
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
828904-1
TE Connectivity 828904-1 CONTACT features CRIMP terminal type, 0.047" min cable entry, and -40 to 130°C operating temp range. Ideal for applications requiring STRAIGHT mounting style with 0 AWG wire size compatibility.
20824050001
Harting Electronics & Kg
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
8655MH0901BLF
Amphenol Communications Solutions
Amphenol's 8655MH0901BLF HOOD features UL approval, zinc alloy material, and a temperature range of -40 to 120°C. With cable entries from 0.157" to 0.512", it is ideal for secure mounting with UNC 4.40 jackscrews in various assembly applications.
8655MH1501BLF
Amphenol Icc
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
8655MH0911LF
Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.
8655MH1511LF
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Mounting Option-1: #4-40; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC;
8655DMES2B13KLF
CONNECTOR ACCESSORY; Mounting Option-1: #4-40 UNC; MIL Conformity: NO; Assembly Item Name: HOOD; Maximum Operating Temperature: 120 Cel; Mounting Option-2: SCREW;
8655MH2511LF
CONNECTOR ACCESSORY; Assembly Item Name: HOOD; IEC Conformity: NO; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO;
8655MH3701BLF
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Mounting Option-1: UNC 4.40; IEC Conformity: NO; Maximum Cable Entry: .512 inch; Minimum Cable Entry: .157 inch;
8655MH3701BKLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Minimum Cable Entry: .157 inch;
8655MH2501BLF
Amphenol Icc's 8655MH2501BLF is a UL-approved hood assembly product made of zinc alloy. It has a min operating temperature of -40°C and a max operating temperature of 120°C. With mounting options like jackscrew and UNC 4.40, it accommodates cable entries ranging from 0.157" to 0.512", making it ideal for various industrial applications.
8655MH2501LF
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Operating Temperature: -55 Cel; Material: ZINC ALLOY; Mounting Option-2: SCREW; DIN Conformity: NO;
86557-6
CONNECTOR ACCESSORY; Rated Current: 2 A; Cable Types: DISCRETE WIRE; Assembly Item Name: CONTACT; Wire Gauge (AWG): 22; Mounting Style: STRAIGHT;
8655MHRA0901LF
8655MHRA0901LF by Amphenol Icc is a UL-approved D-SUB connector backshell. It has a min cable entry of 0.157" and a max cable entry of 0.512". Made of zinc alloy, it can withstand temperatures ranging from -40°C to 120°C.
8655MH2501BKLF
CONNECTOR ACCESSORY; Maximum Cable Entry: .512 inch; IEC Conformity: NO; MIL Conformity: NO; Mounting Option-1: UNC 4.40; Minimum Operating Temperature: -40 Cel;
86557-4
CONNECTOR ACCESSORY; Rated Current: 2 A; Assembly Item Name: CONTACT; Contact Gender: MALE; Minimum Cable Entry: .04 inch; Finish Thickness: 30;
8655MHRA5001LF
CONNECTOR ACCESSORY; Usage: D-SUB CONNECTOR; Maximum Cable Entry: .512 inch; IEC Conformity: NO; DIN Conformity: NO; Minimum Cable Entry: .157 inch;
8655MH0901BKLF
Amphenol Icc's 8655MH0901BKLF hood assembly product has UL approval, zinc alloy material, and a temperature range of -40 to 120°C. It features jackscrew mounting options and accommodates cable entries from 0.157" to 0.512". Ideal for applications requiring secure cable management in various environments.
8655MHRA1501KLF
CONNECTOR ACCESSORY; DIN Conformity: NO; Mounting Option-2: SCREW; Approvals (V): UL; Minimum Operating Temperature: -40 Cel; Maximum Cable Entry: .512 inch;
8655MHRA1502KLF
CONNECTOR ACCESSORY; Material: ZINC ALLOY; Usage: D-SUB CONNECTOR; Assembly Item Name: BACKSHELL; Mounting Option-1: M3; Minimum Cable Entry: .157 inch;
8655MHRA1502LF
CONNECTOR ACCESSORY; Mounting Option-1: M3; Usage: D-SUB CONNECTOR; MIL Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
8655MHRA1501
Fci
CONNECTOR ACCESSORY; Maximum Cable Entry: .512 inch; DIN Conformity: NO; Mounting Option-2: SCREW; Usage: D-SUB; Assembly Item Name: BACKSHELL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved