Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.
Median Price
$0.154
Lifecycle Status
Suppliers In-Stock
44
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.039
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.108
$0.117
Heilind Electronics
$0.114
$0.092
Sager
$0.116
Verical
$0.121
Distrelec
$0.130
$0.120
Arrow
$0.180
$0.104
$0.082
Newark
$0.242
$0.163
$0.132
Mouser Electronics
$0.260
$0.185
$0.156
$0.139
RS Americas
$0.283
$0.215
$0.173
Adafruit Industries
$6.612
$6.281
DigiKey
$13.850
Element14
$0.203
$0.170
$0.166
NEP Electronics
Powell Electronics
$0.113
$0.109
RS (Exports)
$0.178
$0.142
Master Electronics
$0.177
PEI Genesis
TTI Europe
$0.093
TTI
$0.115
$0.102
$0.098
PSC Electronics
Digiode
$0.037
DF Sales Co.
Electro Sonic
$0.119
Nova Conductors
TME
$0.240
$0.164
$0.127
IBS Electronics
$0.126
$0.122
NAC Semi
VNN
Vyrian
Schukat
$0.159
$0.110
$0.103
Rapid Electronics
$0.095
Bristol Electronics
Atlantic Semiconductor
Elcom Components
Classic Components Corporation
Resion
Sensible Micro Corp
Prism Electronics
Manotoh
Brevan Electronics
Mil-Aero Solutions, Inc.
Bisco
Semicontronic
$0.033
$0.032
Corphita
$0.035
Argo Parts USA
Bastille Electronics
$0.124
Modulus Dynamics
$0.138
$0.136
Continental Prestige Electronics
$0.262
$0.134
Aztec Data Supply Inc.
$5.070
Advanced Electronics
Andel Nordic
$7.185
$6.898
Abacus Technologies
Kepictronics
Robosynatics
$3.461
Lucentia Tech
Perfect Parts
EMSNET (Excess)
5559, 30068, 42475 SERIES HOUSING - This wide range of compatible housings makes this product highly versatile and suitable for various applications.
35 - The thick finish provides excellent durability, ensuring long-lasting performance and protection against wear and tear.
CRIMP - The crimp terminal type offers a secure and reliable connection, minimizing the chances of accidental disconnection.
LOOSE - The loose contact design allows for easy installation and replacement, enhancing convenience and flexibility.
CONTACT - The specialized assembly item name ensures compatibility with the respective housing series, contributing to a seamless and efficient assembly process.
16 AWG - With a high maximum wire size, this product can accommodate a wide range of wire gauges, providing adaptability for different wiring needs.
0.122 inch - The generous maximum cable entry size allows for hassle-free cable insertion, reducing the time and effort required for installation.
MALE - The male contact gender offers compatibility with corresponding female connectors, making this product suitable for various electric or electronic systems.
STRAIGHT - The straight mounting style simplifies the installation process, allowing for easy integration into different mounting setups.
SQUARE PIN-SOCKET - The square pin-socket contact style ensures a secure and stable connection, preventing signal loss or communication interruptions.
BRASS - Constructed with brass, this product exhibits excellent conductivity, corrosion resistance, and overall reliability, making it a highly dependable choice.
0.169 inch - The sufficient terminal length facilitates proper connection and ensures optimal performance, guaranteeing a solid electrical interface.
Assembly Products 39-00-0082 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
PCN Assembly/Origin - Mult Devs Supplier Source 25/May/2022
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Telcom Semiconductor
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
0460-204-08141
TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.
6-100525-3
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODE KEY; Usage: PLUG; IEC Conformity: NO; Material: GLASS FILLED POLYAMIDE66;
209-120
Wago
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MOUNTING ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
2858496
Phoenix Contact
CONNECTOR ACCESSORY;
39-00-0059
Molex
Molex 39-00-0059 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Offers 0.051" min cable entry and 0.122" max cable entry for versatile use.
030-2409-003
Itt Cannon
ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
1766245-1
TE Connectivity's 1766245-1 is a male power contact with solder terminal type, rated for 35A current. Made of brass, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting with wire sizes up to 0 AWG.
114017
TE Connectivity 114017 is a male contact sealing item designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG in thermoplastic material. Ideal for assembly products requiring reliable connections in various environments.
DF13-2630SCF(41)
Hirose Electric
5916G6-BK
Anderson Power Products
The Anderson Power Products 5916G6-BK housing is made of polycarbonate, rated for 600V AC/DC. It can accommodate wires up to 6 AWG and operates b/w -20°C to 105°C. Approved by CSA, CUL, UL, it's ideal for electrical assembly applications.
WP-2P
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
C88E000209M3S
Northern Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Usage: CM CONNECTOR; Mounting Option-1: M3;
1060-16-0122
TE Connectivity's 1060-16-0122 contact features crimp terminal type, stamped design, and copper alloy material. With wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style.
M300-0010045
Harwin Plc
Harwin PLC's M300-0010045 CONTACT features CRIMP terminal type, 175°C max operating temp, -65°C min operating temp. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and ROUND PIN-SOCKET contact style. Supports wire sizes from 20 AWG to 18 AWG with a rated current of 10 A.
66099-4
TE Connectivity 66099-4 is a crimp terminal for CPC/G and M series connectors. It has a wire gauge of 16 AWG, rated current of 13A, and operating temperature range from -55 to 150°C. Ideal for power and signal applications requiring male contact gender with brass material.
SWPT-001T-P025
J S T Mfg
W4S-P012
TE Connectivity's W4S-P012 is an Assembly Product with -55 to 125°C operating range. It supports up to 0 AWG wire, designed for power and signal applications using Polybutylene Terephthalate material.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-00-0039
Molex 39-00-0039 CONTACT is a FEMALE CRIMP terminal with BRASS material. It supports wire sizes from 24 AWG to 18 AWG, with a finish thickness of 35 and 0.122 inch max cable entry. Ideal for applications requiring SQUARE PIN-SOCKET contact design such as connectors 5557, 30067, 44516 OR 42474.
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
39-00-0041
Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.
39-00-0040
Molex 39-00-0040 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.051-0.122 inch cable entry, and BRASS material. Ideal for 5559, 30068, 42475 SERIES HOUSING applications with SQUARE PIN-SOCKET contact design.
39-00-0380
Assembly Items;
39-00-0381
39-00-0078
Molex 39-00-0078 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications with wire size up to 16 AWG and cable entry of 0.122". Commonly used in assemblies for connectors like 5557, 30067, 44516 OR 42474.
39-00-0181
Molex 39-00-0181 is a power contact with square pin-socket design. It supports wire sizes from 24 to 18 AWG and has a finish thickness of 30. Ideal for use in housings like 5557, 30067, 44516, or 42474 with 0.051" to 0.122" cable entry.
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
39-00-0077
The Molex 39-00-0077 is a contact assembly product with a crimp terminal type and chain contact design. It is commonly used with 5557, 30067, 44516, or 42474 connectors. With a max wire size of 16 AWG and a mounting style of straight, it is ideal for applications requiring reliable electrical connections.
39-00-0049
Molex 39-00-0049 contact features brass material, square pin-socket design, and crimp terminal type. Ideal for 5559, 30068, 42475 series housing applications with wire sizes ranging from 28 AWG to 22 AWG. Offers straight mounting style and 0.071 inch max cable entry for secure connections.
39-00-0060
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
39-00-0213
Molex 39-00-0213 is a crimp contact with square pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for use in various housing series like 5557, 30067, and more.
39-00-0047
CONNECTOR ACCESSORY; Terminal Type: CRIMP; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Contact Design: LOOSE; DIN Conformity: NO;
39-00-0081
Molex 39-00-0081 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing applications with max wire size of 16 AWG and 0.122" cable entry.
39-00-0079
CONNECTOR ACCESSORY; Maximum Wire Size: 16 AWG; Contact Style: SQUARE PIN-SOCKET; Mounting Style: STRAIGHT; Material: PHOSPHOR BRONZE; Terminal Type: CRIMP;
39-00-0217
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
39-00-0068
CONNECTOR ACCESSORY; Contact Gender: MALE; Contact Style: SQUARE PIN-SOCKET; Additional Features: CONTACT FINISH: TIN; Usage: 5559, 30068, 42475 SERIES HOUSING; Maximum Wire Size: 22 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved