Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-00-0078 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications with wire size up to 16 AWG and cable entry of 0.122". Commonly used in assemblies for connectors like 5557, 30067, 44516 OR 42474.
Median Price
$0.121
Lifecycle Status
Suppliers In-Stock
66
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.071
100+ parts
-
1k+ parts
10k+ parts
$0.060
Heilind Electronics
$0.074
Sager
$0.075
$0.059
Verical
$0.085
$0.082
Arrow
$0.101
$0.057
Distrelec
$0.110
$0.099
$0.088
Farnell
$0.139
$0.076
Element14
$0.150
$0.100
PSC Electronics
$0.169
Newark
$0.178
$0.112
$0.097
Mouser Electronics
$0.180
$0.116
$0.095
$0.089
RS Americas
$0.212
$0.161
$0.129
Misumi USA
$1.640
Adafruit Industries
$4.855
$4.613
DigiKey
$39.280
Master Electronics
$0.141
$0.138
PEI Genesis
RS (Exports)
$0.132
$0.118
$0.104
TTI
$0.084
$0.068
Chip1Stop
$0.083
TTI Europe
$0.073
Powell Electronics
$0.080
$0.077
Avnet
$0.078
NEP Electronics
BTC Electronics
Digiode
$0.070
DF Sales Co.
Voyager Components
TestEquity
Nova Conductors
Maritex
$0.065
TME
$0.190
Component Electronics Inc.
$0.140
$0.130
Bristol Electronics
$0.263
$0.131
FDH Electronics
$0.563
$0.383
$0.310
$0.277
Bisco
$8.112
IBS Electronics
$0.090
$0.086
NAC Semi
$0.134
Vyrian
Rutronik
Connector Distribution Corp
Right Parts Inc.
Classic Components Corporation
Schukat
$0.124
SPM Sales
Q Components
Rapid Electronics
$0.109
$0.081
VNN
LIBRA Elektronik GmbH
Speed Components Ltd
Cyclops Electronics Ltd
Jameco Electronics
ICP Electronique
R&J Components
Electro Sonic
$0.093
$0.079
EMSNET
Prism Electronics
Vicor Industries, Inc.
Pride Electronics
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
ZD Integrated Circuits Inc.
Mil-Aero Solutions, Inc.
Holdelec - ElecDif-Pro
Kallista Electronics Ltd
Semicontronic
$0.045
$0.044
Corphita
$0.067
Argo Parts USA
Continental Prestige Electronics
$0.213
$0.111
$0.066
CoreStaff
$0.323
$0.113
Andel Nordic
$1.498
$1.438
Aztec Data Supply Inc.
$2.681
Advanced Electronics
Modulus Dynamics
$6.098
Perfect Parts
Allen Electronics Distributors
Assy Fe
Abacus Technologies
Authorized Procurement Solutions
Eastek
Glotronic Ltd.
GreenTree Electronics
EMSNET (Excess)
Cyclops Electronics Ltd (Excess)
Robosynatics
$3.708
$3.633
Lucentia Tech
Netroflash
Standard Data Resources (Excess)
Versatile usage options make this product suitable for a variety of applications.
The thickness provides durability and enhances the longevity of the product.
Crimp terminals ensure secure connections, reducing the risk of loose connections or disconnections.
The loose contact design allows for easy installation and maintenance of the product.
Clearly labeled as a contact component, making it easy to identify and integrate into assemblies.
Compatible with a variety of wire sizes, offering flexibility in usage.
Accommodates cables of up to 0.122 inch in diameter, ensuring compatibility with standard cable sizes.
Specifically designed for female connectors, enhancing compatibility with male counterparts.
The straight mounting style simplifies installation and alignment of the product.
Square pin-socket design ensures a secure and stable connection between mating contacts.
Constructed from brass, a durable and conductive material that ensures reliable performance.
The terminal length provides a secure connection point while allowing flexibility in assembly.
Assembly Products 39-00-0078 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
PCN Assembly/Origin - Mult Devs Supplier Source 25/May/2022
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
RC0402JR-070RL
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Swampscott Electronics
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
90119-2110
Molex
Molex 90119-2110 is a female contact with square pin-socket design. It supports wire sizes from 24 to 22 AWG and has a terminal length of 0.168 inch. Ideal for applications requiring crimp terminals in straight mounting style with finish thickness of 25.
08-70-1040
Molex 08-70-1040 is a CRIMP terminal CONTACT with LOOSE design. It supports wire sizes from 28 AWG to 22 AWG, and cable entries ranging from 0.0452" to 0.0748". Ideal for applications requiring FEMALE BELLOWED CONTACTS in STRAIGHT mounting style.
927771-3
TE Connectivity's 927771-3 is a CRIMP terminal with stamped contact design. It has a wire gauge of 17 AWG, rated for 30A current. Ideal for power applications, it can accommodate cables from 0.055 to 0.09 inch and operates b/w -40 to 130°C.
DF3-2428SCFC
Hirose Electric
DF3-2428SCFC by Hirose Electric is a female contact with bellowed design, made of phosphor bronze. It has a finish thickness of 7.9 and terminal length of 0.108". Ideal for straight mounting applications in assembly products.
SPH-001T-P0.5L
J S T Mfg
SPH-001T-P0.5L by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
1-66103-8
TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.
1060-16-0122
TE Connectivity's 1060-16-0122 contact features crimp terminal type, stamped design, and copper alloy material. With wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style.
1053002300
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
3036916
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;
1-929939-1
CONNECTOR ACCESSORY; Manufacturer Series: 929939;
W3S-1939
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Design: POWER AND SIGNAL; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
1735801-1
TE Connectivity's 1735801-1 CONTACT is a FEMALE signal connector with rated voltage of 250V and current of 3A. It supports wire gauge from 30 to 24 AWG, operating temperatures from -25 to 105 °C, and is ideal for applications requiring DISCRETE WIRE connections like part numbers 1735447 and 2041423.
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
17790000021
Harting Electronics & Kg
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODING ITEM; Material: THERMOPLASTIC; IEC Conformity: NO; MIL Conformity: NO;
7810.6569.0
CONNECTOR ACCESSORY;
12089040
Delphi Connection Systems
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
FMK1G
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
5600230448
Molex 5600230448 is a MINI50 unsealed single row receptacle with crimp terminal type. It has a rated current of 4A and rated DC voltage of 14V, suitable for power applications. Made of copper alloy, it features compression contact style and female contact gender, with cable entry ranging from 0.043" to 0.055".
0-0281934-2
TE Connectivity 0-0281934-2 SEALING ITEM has a temp range of -40 to 130°C, fits up to 0 AWG wire, and allows for cable entry of 2.4". Ideal for sealing applications in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-00-0039
Molex 39-00-0039 CONTACT is a FEMALE CRIMP terminal with BRASS material. It supports wire sizes from 24 AWG to 18 AWG, with a finish thickness of 35 and 0.122 inch max cable entry. Ideal for applications requiring SQUARE PIN-SOCKET contact design such as connectors 5557, 30067, 44516 OR 42474.
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
39-00-0041
Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.
39-00-0040
Molex 39-00-0040 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.051-0.122 inch cable entry, and BRASS material. Ideal for 5559, 30068, 42475 SERIES HOUSING applications with SQUARE PIN-SOCKET contact design.
39-00-0380
Assembly Items;
39-00-0381
39-00-0181
Molex 39-00-0181 is a power contact with square pin-socket design. It supports wire sizes from 24 to 18 AWG and has a finish thickness of 30. Ideal for use in housings like 5557, 30067, 44516, or 42474 with 0.051" to 0.122" cable entry.
39-00-0082
The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.
39-00-0059
Molex 39-00-0059 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Offers 0.051" min cable entry and 0.122" max cable entry for versatile use.
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
39-00-0077
The Molex 39-00-0077 is a contact assembly product with a crimp terminal type and chain contact design. It is commonly used with 5557, 30067, 44516, or 42474 connectors. With a max wire size of 16 AWG and a mounting style of straight, it is ideal for applications requiring reliable electrical connections.
39-00-0049
Molex 39-00-0049 contact features brass material, square pin-socket design, and crimp terminal type. Ideal for 5559, 30068, 42475 series housing applications with wire sizes ranging from 28 AWG to 22 AWG. Offers straight mounting style and 0.071 inch max cable entry for secure connections.
39-00-0060
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
39-00-0213
Molex 39-00-0213 is a crimp contact with square pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for use in various housing series like 5557, 30067, and more.
39-00-0047
CONNECTOR ACCESSORY; Terminal Type: CRIMP; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Contact Design: LOOSE; DIN Conformity: NO;
39-00-0081
Molex 39-00-0081 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing applications with max wire size of 16 AWG and 0.122" cable entry.
39-00-0079
CONNECTOR ACCESSORY; Maximum Wire Size: 16 AWG; Contact Style: SQUARE PIN-SOCKET; Mounting Style: STRAIGHT; Material: PHOSPHOR BRONZE; Terminal Type: CRIMP;
39-00-0217
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
39-00-0096
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Maximum Cable Entry: .122 inch; Terminal Length: .169 inch; MIL Conformity: NO; Contact Gender: MALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved