Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.
Median Price
$3.900
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Boersig
1+ parts
$2.182
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$2.940
DigiKey
$2.955
Mouser Electronics
$4.080
$2.860
$2.450
$2.430
TE Connectivity
$4.130
$3.430
$1.960
$1.860
RS (Exports)
$4.577
$4.109
Element14
$5.202
Conrad
$5.239
Adafruit Industries
$5.430
$5.159
Farnell
$5.553
$3.992
$2.835
RS Americas
$5.730
$4.930
Newark
$6.850
$5.750
$5.630
TTI
$2.570
$2.460
$2.390
TTI Europe
$1.947
$1.805
Arrow
$2.403
Future Electronics
$2.320
$2.230
Chip1Stop
$3.600
$2.620
Master Electronics
$2.360
$2.240
$2.200
Verical
$2.961
$2.752
Nova Conductors
$2.818
CustomConnectorKits
$3.490
Vyrian
IBS Electronics
$4.502
$3.899
$3.492
LJR Electronics
Electro Sonic
$3.500
$2.340
$2.190
NAC Semi
$4.760
$4.330
Extreme Components
VNN
Speed Components Ltd
Bisco
Semicontronic
$1.650
$1.609
$1.600
Argo Parts USA
Aztec Data Supply Inc.
$3.686
Continental Prestige Electronics
$4.260
$3.070
$2.610
Advanced Electronics
Perfect Parts
EMSNET (Excess)
Abacus Technologies
Eastek
Netroflash
$2.761
$2.677
Robosynatics
$6.317
$6.188
Lucentia Tech
Benley Electronics
Authorized Procurement Solutions
Crimped terminals ensure a secure connection between the wire and the contact, reducing the risk of electrical failure.
With a high maximum operating temperature, this product can withstand heat-intensive environments without compromising performance.
Machined contacts provide precise and reliable electrical connections, improving overall product reliability and performance.
The low minimum operating temperature allows this product to function effectively even in extremely cold conditions.
Compatible with wire gauge AWG 8, this product is ideal for use with thicker wires, ensuring a stable and secure electrical connection.
The large cross-section area allows for efficient current flow, reducing the risk of overheating and electrical resistance.
With a high rated current of 60 A, this product can handle heavy electrical loads without overheating or failing.
The male contact gender is compatible with a wide range of female connectors, making this product versatile and easy to integrate into different systems.
Assembly Products 0460-204-08141 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
0460-204-08141 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
13711546
Aptiv
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
112264-ZZ
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0;
16-02-0077
Molex
CONNECTOR ACCESSORY;
M23053/16-003-0
TE Connectivity's M23053/16-003-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating b/w -75°C to 150°C. Ideal for various assembly applications requiring high temperature resistance and robust insulation.
SXA-001T-P0.6
J S T Mfg
SXA-001T-P0.6 by J S T Mfg is a UL approved XA connector with crimp terminals for 28-22 AWG wires, rated at 3A and 250V AC/DC. It features female contacts with 20 mohm resistance, suitable for applications requiring straight mounting and operating temperatures b/w -25 to 85°C.
02-08-1003
Molex 02-08-1003 CONTACT is a FEMALE CRIMP terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
D38999/33Z19R
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: METAL; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -65 Cel; Shell Sizes: 19;
15-04-5104
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
SSF-21T-P1.4
SSF-21T-P1.4 by J S T Mfg is a CSA and UL approved CRIMP terminal connector with 2.1" min cable entry, -40 to 105°C temp range, ideal for 22-18 AWG wires in power applications. Featuring a FEMALE contact gender, PHOSPHOR BRONZE material, and 7A rated current capacity for reliable connections.
AW8P
Amphenol
16-02-0083
Molex 16-02-0083 is a CRIMP CONTACT for 24-30 AWG wires, FEMALE gender, SQUARE PIN-SOCKET style. Used in Assembly Products with STRAIGHT mounting style for various applications.
34951-1210
CONNECTOR ACCESSORY; Manufacturer Series: 34951;
Sumitomo Electric Industries
ASSEMBLY ITEMS; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN;
SYM-001T-P0.6
SYM-001T-P0.6 by J S T Mfg is a UL approved RCY CONNECTOR with CRIMP terminals. It supports 3A current, rated for 250V AC/DC, and has contact resistance of 20 mohm. Ideal for applications requiring male contacts, it accommodates wire sizes from 28 to 22 AWG with operating temperatures ranging from -25 to 85 °C.
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
86303637BLF
AMPHENOL ICC
Amphenol Icc's 86303637BLF BACKSHELL is a UL-approved nylon assembly product. It features cable entry ranging from 0.157" to 0.433", with operating temperatures from -40°C to 95°C. Ideal for securing cables in various applications.
AWM-2SB
5227
Keystone Electronics
0473460001
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 100 Cel; Material: PA66; DIN Conformity: NO; MIL Conformity: NO;
SSH-003T-P0.2-H
The J S T Mfg SSH-003T-P0.2-H is a CRIMP terminal with approvals from CSA and UL, rated for 1A current at 50V AC/DC. It has a contact resistance of 40 mohm, suitable for applications requiring FEMALE contacts in straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
0460-202-1631
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
0460-202-20141
TE Connectivity's 0460-202-20141 contact features crimp terminal type, machined contact design, and 20 AWG wire gauge. Ideal for power applications with a rated current of 7.5A, operating b/w -55°C to 125°C.
0460-215-16141
TE Connectivity's 0460-215-16141 is a male power contact with crimp terminal type, suitable for 14 AWG wire. It has a rated current of 13A and operates b/w -55°C to 125°C. Ideal for applications requiring straight mounting, such as power assemblies.
0460-204-12141
TE Connectivity's 0460-204-12141 contact features crimp terminal type, machined contact design, and can handle wire gauge from 14 to 12 AWG. With a rated current of 25A, it is ideal for male contacts in straight mounting applications with temperatures ranging from -55 to 125°C.
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
0460-010-20141
TE Connectivity's 0460-010-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 16-18 AWG wires at 7.5A current. Ideal for male connectors in straight mounting applications.
0460-202-2031
TE Connectivity's 0460-202-2031 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C and supports up to 20 AWG wire size. Ideal for POWER applications, it has a rated current of 7.5 A and features a STRAIGHT mounting style.
0460-220-1231
TE Connectivity's 0460-220-1231 crimp terminal features machined contact design, suitable for wire gauges 12-14 AWG. With a rated current of 25A and operating temperatures ranging from -55 to 125°C, it is ideal for various assembly applications.
0460-264-16141
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 16; Contact Gender: MALE; Minimum Wire Size: 20 AWG;
0460-256-12233
CONNECTOR ACCESSORY; Rated Current: 25 A; Contact Gender: MALE; Terminal Type: CRIMP; Cross Section Area: 1.31 mm2; Maximum Wire Size: 16 AWG;
0460580000
TERMINAL BLOCK ACCESSORY;
0460-244-16141
TE Connectivity 0460-244-16141 is a SOLDER terminal with MACHINED contact design. It operates b/w -55 to 125 °C, accommodating wire sizes up to 0 AWG. With a rated current of 13A, it's ideal for male contact gender applications in Assembly Products.
0460-247-1631
CONNECTOR ACCESSORY; Rated Current: 13 A; Cross Section Area: 1.31 mm2; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 16 AWG;
0460-215-1631
CONNECTOR ACCESSORY; Rated Current: 13 A; IEC Conformity: NO; Contact Gender: MALE; Contact Style: ROUND PIN-SOCKET; DIN Conformity: NO;
0460-229-16141
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: MACHINED; Terminal Type: SOLDER; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;
0460-208-20309
CONNECTOR ACCESSORY; Rated Current: 7.5 A; IEC Conformity: NO; Maximum Wire Size: 0 AWG; Assembly Item Name: CONTACT; MIL Conformity: NO;
0460-204-08141-AS
CONNECTOR ACCESSORY; Rated Current: 60 A; Wire Gauge (AWG): 8; Minimum Wire Size: 10 AWG; Cross Section Area: 8 mm2; Contact Design: MACHINED;
0460-208-16141
TE Connectivity's 0460-208-16141 CONTACT features SOLDER terminal type, MACHINED contact design, and 125°C max operating temp. Ideal for applications requiring a MALE CONTACT with 0 AWG wire size, rated at 13A current in STRAIGHT mounting style.
0460-204-04141
CONNECTOR ACCESSORY; Rated Current: 100 A; Maximum Wire Size: 6 AWG; Mounting Style: STRAIGHT; DIN Conformity: NO; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved