Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 70 A; Maximum Fall Time (tf): 320 ns;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Advanced Electronics
1+ parts
$2.256
100+ parts
$2.053
1k+ parts
$1.850
10k+ parts
Andel Nordic
$6.027
$5.786
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Glotronic Ltd.
Insulated Gate Bipolar Transistors (IGBT) IXGR35N120B attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Littelfuse
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Fall Time (tf):
Maximum Gate-Emitter Threshold Voltage:
Maximum Gate-Emitter Voltage:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Maximum Turn Off Time (toff):
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
Maximum VCEsat:
IXGR35N120B Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
Onsemi
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Thinking Electronic Industrial
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
IRG4PC50UDPBF
Infineon Technologies
IRG4PC50UDPBF by Infineon Technologies is an N-CHANNEL IGBT with a max VCEsat of 2V and a max IC of 55A. It is designed for POWER CONTROL applications, featuring a package style of FLANGE MOUNT and operating temperatures ranging from -55 to 150 °C.
FS150R06KE3BOSA1
FS150R06KE3BOSA1 by Infineon is a N-CHANNEL IGBT with 6 elements, built-in diode, and thermistor. It has a max voltage of 600V, current of 150A, and turn off time of 450ns. Ideal for applications requiring high power efficiency and temperature resistance like industrial motor drives.
IKW30N65EL5XKSA1
IKW30N65EL5XKSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 650V and Max Collector Current of 85A. It has a Nominal Turn Off Time of 520ns and Nominal Turn On Time of 44ns, making it ideal for POWER CONTROL applications requiring fast switching speeds. The transistor comes in a RECTANGULAR package style with THROUGH-HOLE terminals, suitable for FLANGE MOUNT installation.
IRG4BC30S-STRLP
IRG4BC30S-STRLP by Infineon Technologies is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 600V and a Max Collector Current of 34A. It has a Nominal Turn Off Time of 1550ns and Nominal Turn On Time of 40ns, making it ideal for POWER CONTROL applications requiring fast switching speeds. This IGBT comes in a RECTANGULAR package style with GULL WING terminals, suitable for surface mount assembly in various electronic devices.
STGWT40HP65FB
STMicroelectronics
STGWT40HP65FB by STMicroelectronics is an N-CHANNEL IGBT with VCEsat of 2V, IC of 80A, and Pmax of 283W. Ideal for power control applications, it has a toff of 202ns and ton of 169ns. Suitable for high-power systems operating b/w -55°C to 175°C.
FF200R12KT4HOSA1
Infineon Technologies' FF200R12KT4HOSA1 is a N-CHANNEL IGBT with 2 SERIES CONNECTED elements, each with a BUILT-IN DIODE. It has a max voltage of 1200V, max current of 320A, and turn-off time of 700ns. Ideal for applications requiring high power switching like industrial motor drives and renewable energy systems.
IRG4PC40UDPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; Maximum Collector Current (IC): 40 A; Nominal Turn On Time (ton): 92 ns;
NXH450B100H4Q2F2PG
NXH450B100H4Q2F2PG by Onsemi is an N-CHANNEL IGBT with 3 BANKS, SERIES CONNECTED configuration. It has a Max VCEsat of 2.25V and a Nominal Turn Off Time of 224ns, making it ideal for POWER CONTROL applications. With a Max Collector-Emitter Voltage of 1000V and Max Power Dissipation of 234W, this IGBT operates in temperatures ranging from -40°C to 150°C.
IXXH75N60C3D1
IXXH75N60C3D1 by Littelfuse is an N-CHANNEL IGBT with 600V VCEsat, 150A IC, and 750W power dissipation. Ideal for power control applications, it features a single configuration with built-in diode and a fast turn-off time of 185ns.
APT200GN60J
Microchip Technology
APT200GN60J by Microchip Technology is an N-CHANNEL IGBT transistor with 600V max collector-emitter voltage and 250A max collector current. It has a power dissipation of 682W, turn-off time of 1210ns, and turn-on time of 75ns. Ideal for power control applications requiring high voltage and current handling capabilities.
IGW40N120H3FKSA1
IGW40N120H3FKSA1 by Infineon Technologies is an N-CHANNEL IGBT with 1200V max collector-emitter voltage, 80A max collector current, and 414ns nominal turn off time. Ideal for power control applications, this transistor features a single configuration in a rectangular package with through-hole terminals.
FZ1000R33HE3BPSA1
Infineon's FZ1000R33HE3BPSA1 is a N-CHANNEL IGBT with 2 elements in parallel. It has a max collector current of 1000A and turn off time of 3550ns, suitable for power control applications. The transistor operates at a max voltage of 3300V, featuring silicon material and isolated case connection.
ISL9V5036P3-F085
ISL9V5036P3-F085 by Onsemi is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 360V and Max Collector Current of 46A. It is designed for POWER CONTROL applications, featuring a built-in diode and resistor in a RECTANGULAR package style. With a Max Power Dissipation of 250W, it operates at temperatures up to 175°C efficiently.
STGE200NB60S
STGE200NB60S by STMicroelectronics is an N-CHANNEL IGBT with 600V VCE, 200A IC, and 1.6V VCEsat. Ideal for POWER CONTROL applications, it has a max power dissipation of 600W and operates up to 150°C.
IXBX75N170A
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1040 W; Maximum Collector Current (IC): 110 A; No. of Elements: 1;
SGD02N60BUMA1
Infineon's SGD02N60BUMA1 is an N-CHANNEL IGBT transistor with 600V max collector-emitter voltage and 6A max collector current. Ideal for motor control applications, it has a turn-off time of 354ns and turn-on time of 34ns. This surface-mount device in a rectangular package is designed for efficient power management at up to 150°C operating temperature.
IRG4PH20KPBF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 24 W; Maximum Collector Current (IC): 11 A; Terminal Form: THROUGH-HOLE;
IRGP4263PBF
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Collector Current (IC): 90 A; Maximum Fall Time (tf): 50 ns; Maximum Gate-Emitter Threshold Voltage: 7.7 V;
FS50R12W2T4B11BOMA1
Infineon's FS50R12W2T4B11BOMA1 is an N-CHANNEL IGBT with 1200V VCE, 83A IC, and 490ns toff. Ideal for POWER CONTROL applications due to its complex configuration and fast switching times of 185ns ton.
FS400R07A1E3S7BOMA1
Infineon FS400R07A1E3S7BOMA1 is a N-CHANNEL IGBT with 6 elements in bridge configuration. Ideal for power control applications, it has VCEsat of 1.7V, IC of 500A, and Pmax of 1250W. Operates b/w -40 to 150°C with ton at 220ns and toff at 540ns.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IXGR16N170AH1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Maximum Collector Current (IC): 16 A; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Maximum Collector Current (IC): 16 A; Package Style (Meter): IN-LINE;
IXGR32N170H1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 38 A; Package Shape: RECTANGULAR;
IXGR40N60C2D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 56 A; No. of Terminals: 3; Terminal Position: SINGLE;
IXGR55N120A3H1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 70 A; Transistor Element Material: SILICON;
IXGR35N120C
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 70 A; Maximum Gate-Emitter Voltage: 20 V;
IXGR60N60C3D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 75 A; Peak Reflow Temperature (C): 260;
IXGR40N60B
IXGR64N60A3
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 47 A; Package Style (Meter): FLANGE MOUNT;
IXGR45N120
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 75 A; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e1;
IXGR50N90B2D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 200 A; Package Style (Meter): IN-LINE; Terminal Position: SINGLE;
IXGR35N120BD1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 54 A; Maximum Operating Temperature: 150 Cel; Case Connection: ISOLATED;
IXGR60N60C3C1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 75 A; Maximum Time At Peak Reflow Temperature (s): 10;
IXGR32N90B2D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; Maximum Collector Current (IC): 47 A; Terminal Finish: TIN SILVER COPPER;
IXGR48N60B3
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 60 A; JESD-30 Code: R-PSIP-T3;
IXGR48N60B3D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 60 A; Reference Standard: UL RECOGNIZED;
IXGR24N120C3D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 48 A; Package Shape: RECTANGULAR;
IXGR48N60C3D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 56 A; Terminal Finish: TIN SILVER COPPER;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 70 A; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved