Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 30 V; Nominal Current Transfer Ratio: 300 %;
Median Price
$0.378
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.348
1k+ parts
$0.326
10k+ parts
-
Mouser Electronics
$0.810
$0.414
$0.330
$0.255
DigiKey
$0.413
$0.323
$0.271
Verical
$0.277
RS (Exports)
$0.178
Digiode
$0.359
Chip Stock
Vyrian
Nova Conductors
Semicontronic
$0.176
$0.172
$0.171
Ampacity Inc.
Corohmni
$0.207
Aztec Data Supply Inc.
$0.313
Corphita
$0.340
Advanced Electronics
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Kulean Microsystems
A-Z Elektronik GmbH
Problanco Electronics
TANS Electronics
Argo Parts USA
Supply Digital
Aranea Global
UHIMA Technologies
SupplyDigital Components
Continental Prestige Electronics
Computer Components Inc. - USA
Optocoupler Transistor Outputs TIL113SM attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Fairchild Semiconductor
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
TIL113SM Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Lite-on Semiconductor
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
TLP185(GR,TPL,SE(T
Toshiba
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
LTV-816S-TA1
Lite-on Technology
The Lite-on Technology LTV-816S-TA1 is a single optocoupler with max. forward current of 0.05 A, operating temp. range from -50 to 110°C, and max. isolation voltage of 5000 V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with high reliability and fast response times.
TLP290-4(GB-TP,E)
Toshiba's TLP290-4(GB-TP,E) is a 4-channel optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 110°C, and isolation voltage up to 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in separate configurations.
TCLT1003
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 70 V; No. of Elements: 1; Maximum Dark Current: 100 nA; Configuration: SINGLE;
LTV-827S-TA1
LTV-827S-TA1 by Lite-on Technology is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05 A and operates b/w -30 to 100°C. Ideal for applications requiring high isolation voltage and fast response time in surface mount setups.
CNY17-3
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A;
4N35
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .06 A; Minimum Collector-emitter Breakdown Voltage: 30 V; Minimum Operating Temperature: -55 Cel;
SFH6156-3
SFH6156-3 by Vishay Intertechnology is a SINGLE optocoupler with 0.06A forward current, 100% transfer ratio, and 5300V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage and low dark current in temperatures ranging from -55 to 100°C.
CPC1303GRTR
IXYS Corporation
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V;
LTV-846S
LTV-846S by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and an isolation voltage of 5000V, making it ideal for applications requiring high electrical isolation such as industrial control systems. With a min operating temperature of -30°C and max of 100°C, it offers reliable performance in various environments.
TLP293(GB-TPL,E(T
Toshiba's TLP293(GB-TPL,E(T) is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 125°C efficiently.
PC817X2NIP1B
Sharp Corporation
Sharp Corporation's PC817X2NIP1B is a SINGLE optocoupler with max. forward current of 0.05A, 260% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring transistor output optocouplers like temperature sensors and industrial automation due to its -30 to 100°C operating range and 80V breakdown voltage.
H11G2TVM
The Onsemi H11G2TVM is a single optocoupler with a max forward current of 0.06A and Darlington output type. With a min operating temperature of -40°C and max isolation voltage of 7500V, it is ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
TLP290(GR,SE
Toshiba TLP290(GR,SE) is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
CNY172SR2M
CNY172SR2M by Onsemi is a SINGLE optocoupler with max. forward current of 0.06A, min. transfer ratio of 63%, and max. isolation voltage of 4170V. Ideal for applications requiring high-speed response times and reliable electrical isolation in temperatures ranging from -40 to 100°C.
TCMT4100T0
Vishay Intertechnology's TCMT4100T0 is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation and signal transfer in compact designs.
4N25V
Dpac Technologies
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel;
PS2805-1-F3-A
California Eastern Laboratories
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 80 %; Minimum Operating Temperature: -55 Cel;
PS2801-1-F3-A-K
Renesas Electronics
PS2801-1-F3-A-K by Renesas Electronics is a SINGLE optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and a nominal current transfer ratio of 300%.
CNY64
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Current Transfer Ratio: 50 %; Maximum On State Current: .05 A; Maximum Forward Voltage: 1.6 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TIL111M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Current Transfer Ratio: 50 %; Maximum Forward Current: .06 A; Maximum Forward Voltage: 1.5 V;
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V;
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 50 nA; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
TIL113M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL APPROVED; Maximum On State Current: .15 A; Minimum Operating Temperature: -40 Cel;
DARLINGTON OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5000 V; Additional Features: UL RECOGNIZED; Minimum Collector-emitter Breakdown Voltage: 55 V; Nominal Current Transfer Ratio: 300 %; Maximum Dark Current: 100 nA;
TIL113M by Onsemi is a single configuration optocoupler with a max forward current of 0.08 A and a min operating temperature of -40°C. It is commonly used in applications requiring high isolation voltage and low dark current, such as industrial control systems and power supplies.
TIL113SM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .08 A; Configuration: SINGLE; Maximum Response Time: .0003 s; Minimum Operating Temperature: -55 Cel;
Isocom Components
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Maximum Forward Current: .08 A; Maximum Dark Current: 100 nA; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V;
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; Packing Method: TUBE;
TIL111VM
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Power Dissipation: .15 W; Maximum Forward Current: .06 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Minimum Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 4170 V; Minimum Operating Temperature: -40 Cel;
TIL112
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Isolation Voltage: 1500 V;
TIL113
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 1500 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 1.5 V;
TIL109
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Minimum Current Transfer Ratio: .7 %; Maximum Response Time: .000005 s;
TIL114
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Minimum Collector-emitter Breakdown Voltage: 30 V; Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .1 A; Additional Features: TTL COMPATIBLE;
TIL103
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Forward Current: .04 A; Minimum Collector-emitter Breakdown Voltage: 35 V; Maximum Dark Current: 100 nA; Maximum Isolation Voltage: 1000 V;
TIL111
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 50 nA; Minimum Current Transfer Ratio: 8 %; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V;
TIL102
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 60 %; No. of Elements: 1; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 35 V; Maximum Forward Current: .04 A;
TIL108
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .000005 s; Maximum Operating Temperature: 155 Cel; Maximum Power Dissipation: .15 W; Maximum Forward Current: .05 A;
TIL113VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Voltage: 1.5 V; Maximum Isolation Voltage: 7500 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved