Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Terminal Position: DUAL; Peak Reflow Temperature (C): 260;
Median Price
$0.318
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Farnell
1+ parts
$0.303
100+ parts
$0.154
1k+ parts
$0.120
10k+ parts
-
Element14
$0.600
$0.304
Newark
$0.882
$0.356
$0.225
$0.216
Mouser Electronics
$0.900
$0.363
$0.278
$0.215
DigiKey
Future Electronics
$0.335
Verical
$0.255
$0.226
Master Electronics
$0.333
$0.217
$0.192
Arrow
$0.153
Chip1Stop
$0.261
$0.162
$0.146
Flip Electronics (Authorized)
RS (Exports)
$0.149
Rochester
$0.178
$0.159
Digiode
$0.116
Nova Conductors
$0.341
Maritex
$0.395
$0.235
$0.190
TME
$0.730
$0.311
$0.206
$0.194
Voyager Components
$7.114
NAC Semi
$0.680
Chip Stock
Vyrian
IBS Electronics
$0.209
$0.196
Cyclops Electronics Ltd
Component Sense
Flip Electronics
Bristol Electronics
Atlantic Semiconductor
Sensible Micro Corp
Greenchips
SIE Connect GmbH - GreenChips
Anansix
Pegasus Components GmbH
ComSIT Distribution GmbH
Amalfi Trading
Ampacity Inc.
$0.097
Semicontronic
$0.095
$0.094
Corphita
$0.110
Corohmni
Argo Parts USA
$0.184
Advanced Electronics
$0.191
$0.181
Netroflash
$0.334
Continental Prestige Electronics
$0.455
$0.252
Aztec Data Supply Inc.
$1.663
RC Electronics
$0.170
GreenTree Electronics
Perfect Parts
Kepictronics
Futuretech Components
Lixinc
iodParts Technologies Inc.
Benley Electronics
TANS Electronics
Eastek
$0.370
Authorized Procurement Solutions
Formix International (Excess)
Supply Digital
A-Z Elektronik GmbH
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
Allen Electronics Distributors
Robosynatics
Lucentia Tech
Small Signal Field Effect Transistors (FET) NDC7001C attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Fairchild Semiconductor
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NDC7001C Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.21.00.95
SB
8541.21.00.80
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Db Lectro
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN337N-F169
Small Signal Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
SI4909DY-T1-GE3
Vishay Siliconix
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 8 A; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: .027 ohm;
LND150N3-GP003
Microchip Technology
LND150N3-GP003 by Microchip Technology is a small signal N-CHANNEL FET with a min DS breakdown voltage of 500V. It is commonly used for switching applications and operates in depletion mode. With a max operating temperature of 150°C, it has a max drain current of 0.03A and a max drain-source on resistance of 1000Ω.
BS170P
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Package Shape: RECTANGULAR; No. of Elements: 1; No. of Terminals: 3;
BSS138LT1
Onsemi's BSS138LT1 is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C temperature range. Its GULL WING terminals and SMALL OUTLINE package make it suitable for surface mount designs.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
FDV302P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
BS170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Package Style (Meter): CYLINDRICAL; Terminal Position: BOTTOM;
FDC2512
The Onsemi FDC2512 is a N-CHANNEL FET with 150V DS breakdown voltage, ideal for switching applications. It features a max drain current of 1.4A and 0.425 ohm drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 150°C, making it suitable for various electronic devices requiring high power dissipation.
BSS138W
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .34 W; Terminal Form: GULL WING; Additional Features: ULTRA-LOW RESISTANCE;
2N7000
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; JESD-30 Code: O-PBCY-T3; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Transistor Application: SWITCHING; Package Style (Meter): CYLINDRICAL;
MMBF170
The Onsemi MMBF170 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With 0.5A max drain current and 5 ohm on resistance, it offers efficient performance in small outline packages.
BSS223PWH6327XTSA1
Infineon Technologies
Infineon BSS223PWH6327XTSA1 is a P-CHANNEL FET with 20V DS Breakdown Voltage, 0.39A ID, and 1.2Ω RDS(ON). Ideal for small signal applications due to its ENHANCEMENT MODE operation and built-in diode configuration. Suitable for compact designs with its GULL WING terminals and SMALL OUTLINE package style.
NDS7002A
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
ZXMP4A16GTA
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.9 W; JESD-609 Code: e3; Maximum Operating Temperature: 150 Cel;
BSS138BKWT106
ROHM
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 10;
FDG6332C
The Onsemi FDG6332C is a Small Signal FET with N/P-Channel, 2 elements w/ diode. It operates in enhancement mode for switching applications. Features include max drain current of 0.7A, min DS breakdown voltage of 20V, and max power dissipation of 0.3W.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NDS356AP
NDS356AP by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 1.1A, 0.2 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. This SMALL OUTLINE transistor has a max Power Dissipation of 0.5W and can withstand temperatures from -55 to 150 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NDC7002N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Maximum Power Dissipation Ambient: 1.4 W; Maximum Operating Temperature: 150 Cel;
NDC7002N by Onsemi is a small signal FET with N-CHANNEL polarity, suitable for switching applications. It features 2 elements with built-in diode, max drain current of 0.51A, and max power dissipation of 0.96W. With a min operating temperature of -55°C and max operating temperature of 150°C, it offers reliable performance in various environments.
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Package Body Material: PLASTIC/EPOXY; Operating Mode: ENHANCEMENT MODE;
NDC7001C
NDC7001C by Onsemi is a Small Signal FET with N-Channel and P-Channel polarity. It features 2 elements with built-in diode for switching applications. With a max drain current of 0.51A, it operates in enhancement mode at up to 150°C, making it suitable for various electronic devices.
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; JESD-30 Code: R-PDSO-G6; Maximum Drain Current (Abs) (ID): .51 A;
NDC7003P
NDC7003P by Onsemi is a P-CHANNEL FET with 2 elements and built-in diode, ideal for switching applications. It features a max drain current of 0.34A, operating at 150°C with a breakdown voltage of 60V. With a package style of small outline and gull wing terminals, it offers efficient performance in compact designs.
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 6;
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .34 A;
NDC7001C_NL
Fairchild Semiconductor's NDC7001C_NL is a Small Signal FET with N-CHANNEL and P-CHANNEL polarity. It features 2 elements with built-in diode for switching applications. With a max drain current of 0.51A, it operates in enhancement mode at temperatures ranging from -55 to 150 °C.
NDC7002N_NL
Fairchild Semiconductor's NDC7002N_NL is a Small Signal FET with N-CHANNEL polarity. It features 2 elements with built-in diode for SWITCHING applications. With a max Drain Current of 0.51A and Breakdown Voltage of 50V, it operates in Enhancement Mode at temperatures ranging from -55 to 150°C.
NDC7002ND87Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; No. of Terminals: 6; Minimum DS Breakdown Voltage: 50 V;
NDC7001C/L99Z
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .51 A; Maximum Power Dissipation Ambient: 1.4 W; Terminal Form: GULL WING;
NDC7001C/S62Z
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .51 A; Minimum DS Breakdown Voltage: 50 V; Package Body Material: PLASTIC/EPOXY;
NDC7002N/S62Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Transistor Application: SWITCHING; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NDC7002ND84Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Package Shape: RECTANGULAR; Maximum Feedback Capacitance (Crss): 5 pF;
NDC7001CD87Z
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Terminal Form: GULL WING; Operating Mode: ENHANCEMENT MODE;
NDC7001CL99Z
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G6; Maximum Drain Current (ID): .51 A; Minimum DS Breakdown Voltage: 50 V;
NDC7001CS62Z
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 50 V; No. of Terminals: 6; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
NDC7001CX
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved