Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .37 W; Minimum Operating Temperature: -55 Cel; Transistor Element Material: SILICON;
Median Price
$0.053
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.410
100+ parts
$0.147
1k+ parts
$0.089
10k+ parts
$0.062
Arrow
-
Verical
$0.048
Component Sense
Native Components
$0.847
Northwest PG Solutions
$0.932
RC Electronics
$0.050
iodParts Technologies Inc.
Small Signal Field Effect Transistors (FET) DMG6301UDW-13 attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Diodes Incorporated
Additional Features:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
DMG6301UDW-13 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Hitano Enterprise
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Daco Semiconductor
SI2323DDS-T1-GE3
Vishay Intertechnology
SI2323DDS-T1-GE3 by Vishay Intertechnology is a P-channel small signal FET with a min DS breakdown voltage of 20V. It is used for switching applications and operates in enhancement mode. With a max drain current of 5.3A and a max drain-source on resistance of 0.039 ohm, it offers efficient performance in a compact package.
2N7002K
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-30 Code: R-PDSO-G3; Minimum DS Breakdown Voltage: 60 V;
ZVN3306FTA
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Drain Current (ID): .15 A; Maximum Drain-Source On Resistance: 5 ohm;
BSS138NH6433XTMA1
BSS138NH6433XTMA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.36W power dissipation, and 3.5 ohm drain-source resistance. Ideal for small outline applications in automotive electronics due to AEC-Q101 reference standard compliance and -55 to 150 °C operating temperature range.
MGSF1N03LT1G
MGSF1N03LT1G by Onsemi is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 1.6A, 0.1 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and METAL-OXIDE SEMICONDUCTOR technology, it offers reliable performance in small outline packages at up to 150°C.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BSS123
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Drain Current (ID): .2 A; No. of Terminals: 3;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
FDN302P
FDN302P by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2.4A and 0.055 ohm Drain-Source Resistance, operating in ENHANCEMENT MODE at temperatures ranging from -55 to 150 °C.
ZVP3310FTA
ZVP3310FTA by Diodes Inc. is a P-CHANNEL FET for SWITCHING applications. It has a 100V DS Breakdown Voltage, 0.33W Power Dissipation, and 20 ohm On Resistance. With ENHANCEMENT MODE operation, it can handle up to 0.075A Drain Current in a SMALL OUTLINE package.
BSS138WG
BSS138WG by Changzhou Galaxy Century Microelectronics is a N-CHANNEL FET with 50V DS breakdown voltage, ideal for SWITCHING applications. It features SINGLE configuration with built-in diode, GULL WING terminals, and operates in ENHANCEMENT MODE. With 0.2W power dissipation and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic circuits.
SI2309CDS-T1-E3
SI2309CDS-T1-E3 by Vishay Intertechnology is a P-CHANNEL FET for SWITCHING applications. It features 60V DS Breakdown Voltage, 1.6A Drain Current, and 0.345 ohm On Resistance. With ENHANCEMENT MODE operation, this transistor has a max power dissipation of 1.7W in a SMALL OUTLINE package suitable for surface mount technology.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Minimum Operating Temperature: -65 Cel;
MMBF170-7
Diodes Inc. MMBF170-7 is a N-channel FET with 60V DS breakdown voltage, ideal for switching applications. It features 0.5A max drain current, 5ohm RDS(on), and 5pF Crss. The small outline package with gull wing terminals makes it suitable for surface mount designs in enhancement mode operation up to 150°C.
MMBFJ177LT1G
MMBFJ177LT1G by Onsemi is a P-CHANNEL FET in PLASTIC/EPOXY package. It operates in DEPLETION MODE with 300 ohm RDS(on) and 5.5 pF Crss, ideal for CHOPPER applications. This SMALL OUTLINE transistor has a max temp of 150°C, making it suitable for various electronic devices.
BS170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Peak Reflow Temperature (C): NOT SPECIFIED; Package Style (Meter): CYLINDRICAL;
FDC640P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
2N7002P,215
2N7002P,215 by NXP Semiconductors is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.36A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 1.6 ohm On Resistance. Package style is SMALL OUTLINE, suitable for surface mount technology.
DMG1013T-7
DMG1013T-7 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage and 0.46A max drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.27W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DMG6601LVT-7
DMG6601LVT-7 by Diodes Inc. is a Small Signal FET with N/P-channel types, ideal for switching applications. It features 30V DS breakdown voltage, 0.055 ohm max RDS(on), and 3.8A max drain current. With AEC-Q101 compliance, it's suitable for automotive electronics requiring high reliability in compact designs.
DMG6602SVTQ-7
DMG6602SVTQ-7 by Diodes Inc. is a Small Signal FET with N/P-channel, 2 elements, built-in diode for switching applications. Features include 30V DS breakdown voltage, 0.06 ohm RDS(on), and 2.7A ID max. Ideal for AEC-Q101 compliant automotive electronics due to its -55 to 150°C operating range and compact SOT package design.
DMG6601LVT-7-01
DMG6601LVT-7-01 by Diodes Inc. is a Small Signal FET with N/P-channel, 2 elements & built-in diode for switching applications. Features include 30V DS breakdown voltage, 0.055 ohm RDS(on), and 3.8A ID max. Suitable for AEC-Q101 standards in automotive electronics due to its MOSFET technology and dual-terminal configuration.
DMG6402LVT-7
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Terminal Finish: MATTE TIN; Maximum Drain Current (Abs) (ID): 6 A;
DMG6301UDW-7
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .37 W; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30;
DMG6302UDW-13
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
DMG6302UDW-7
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
DMG6402LVT-13
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.75 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e3;
DMG6602SVTQ-13
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE; Terminal Position: DUAL;
DMG6968UDM-7
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .85 W; Additional Features: HIGH RELIABILITY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DMG6968UQ-7
Small Signal Field-Effect Transistors; Configuration: SINGLE; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Drain Current (Abs) (ID): 6.5 A; Terminal Finish: MATTE TIN;
DMG6968UTS-13
N-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Additional Features: HIGH RELIABILITY; Maximum Drain Current (ID): 5.2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved