Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC5598IUF#PBF by Analog Devices is a cellphone IC with 24 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
Median Price
$9.891
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
$8.960
100+ parts
$8.420
1k+ parts
$7.620
10k+ parts
-
Analog Devices Inc
$9.100
$6.450
Chip1Stop
$12.900
$8.990
Mouser Electronics
$14.830
$8.080
$8.060
$7.970
DigiKey
$15.290
Arrow
$8.811
$8.321
Verical
$7.390
Digiode
$8.512
Vyrian
Chip Stock
Anansix
Semicontronic
$7.430
$7.391
Corphita
$8.064
Corohmni
Parana Technologies
$9.326
$8.673
IDEA Electronic Components Group
$10.028
$9.527
Continental Prestige Electronics
$11.380
$8.830
MARBEL Systems
$12.088
Texas Native Microelectronics
$13.894
$13.338
$12.921
$12.227
DigiPath Technology Company
$15.644
$15.018
Kenton Components
$16.673
$14.672
Qasali Group International
$37.514
$34.888
$33.012
Authorized Procurement Solutions
RC Electronics
Perfect Parts
Plastic/Epoxy package body material is lightweight and inexpensive, making this cellphone IC a cost-effective choice for manufacturers.
With surface mount capability, this cellphone IC can be easily mounted onto circuit boards, saving space and simplifying the manufacturing process.
Quad terminal positioning allows for efficient connections and better signal transmission, improving the overall performance of the IC.
Operating at a nominal voltage of 5V, this IC is suitable for a wide range of applications, providing flexibility and compatibility.
With a high peak reflow temperature of 260 °C, this IC can withstand the reflow soldering process without damage, ensuring reliable performance during assembly.
Cellphone ICs LTC5598IUF#PBF attributes and parameters. Explore more Cellphone ICs devices from Analog Devices
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LTC5598IUF#PBF Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Micro Commercial Components
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Fairchild Semiconductor
LMH2121TMX
Texas Instruments
LMH2121TMX by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature range from -40 to 85°C and has a nominal voltage of 2.7V. This RF and baseband circuit IC is designed for telecom applications requiring high performance in compact spaces.
ADF4360-0BCPZRL7
Analog Devices
Analog Devices' ADF4360-0BCPZRL7 is a Cellphone IC with 24 terminals, BICMOS technology, and 3.3V supply voltage. It features a square package shape, matte tin finish, and operates in industrial temperature range (-40 to 85°C). Ideal for baseband circuits in telecommunications due to its compact size (4x4mm) and low profile (1mm).
LMH6523SQ/NOPB
LMH6523SQ/NOPB by Texas Instruments is a 54-terminal cellphone IC with a rectangular package style. It operates in industrial temperature range (-40 to 85°C) and has 4 channels for RF and baseband circuits. With a max gain tolerance of 25.74 dB, it consumes up to 485 mA at nominal voltage of 5V, making it suitable for telecom applications.
MAX19995AETX+
MAX19995AETX+ by Analog Devices is a Cellphone IC with BICMOS tech. It operates b/w -40 to 85 °C, has 36 terminals in a square package style, and requires 5V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its small form factor and high-temperature tolerance.
CC115LRTKT
CC115LRTKT by Texas Instruments is a cellphone IC with a package style of chip carrier, suitable for RF and baseband circuits. It operates in industrial temperature range (-40 to 85°C) with a nominal voltage of 3.6V. This surface-mount device has 20 terminals, nickel palladium gold finish, and compact dimensions (4x4mm).
TRF4400PW
TRF4400PW by Texas Instruments is a cellphone IC with 24 terminals, operating at 3V. It features CMOS technology, RF and baseband circuit for telecom applications. The package is small outline, thin profile, with shrink pitch, suitable for surface mount assembly.
SARA-U201-03B-00
U-blox Ag
SARA-U201-03B-00 by U-blox Ag is a CELLPHONE IC with 96 terminals, RECTANGULAR package shape, and 3.25mm seated height. Ideal for TELECOM CIRCUITS, it operates b/w -20 to 65°C with a supply voltage of 3.8V, making it suitable for commercial applications.
CC1020RSS
The Texas Instruments CC1020RSS is a cellphone IC with 32 terminals in a square package. It operates at temperatures from -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.65mm, making it suitable for industrial telecom applications.
TCM8010-37FR
Texas Instruments TCM8010-37FR is a Cellphone IC with 44 terminals in a square package. Operating at -30 to 70°C, it has a supply voltage of 3.7/4V and BICMOS technology. Ideal for baseband circuits, this IC is surface mountable and features GULL WING terminals in a flatpack style.
MAX2676EWT+
MAX2676EWT+ by Analog Devices is a CELLPHONE IC with BICMOS tech. It operates at -40 to 85 °C, has 3.3V supply, and RF/BASEBAND circuits. The package is GRID ARRAY, 0.69mm height, and 1.27mm length for telecom applications.
MAX2690
RF AND BASEBAND CIRCUIT; JESD-609 Code: e0; Terminal Finish: TIN LEAD; Qualification: Not Qualified;
SI4721-B20-GMR
Silicon Labs
Silicon Labs' SI4721-B20-GMR is a cellphone IC with 20 terminals in a square chip carrier package. Operating b/w -20°C to 85°C, it features RF and baseband circuits for telecom applications. With a nominal voltage of 3.3V, this IC has a compact size of 3x3mm suitable for surface mount designs.
TCM320AC56DW
Texas Instruments TCM320AC56DW is a Cellphone IC with 20 terminals, operating from -40 to 85°C. It features Gull Wing terminals, 5V supply voltage, and is ideal for Baseband Circuit applications in the telecom industry.
HMC485MS8G
HMC485MS8G by Analog Devices is a Cellphone IC with 8 terminals, operating temperature range of -40 to 85°C, and supply voltage of 5V. It is used in RF and baseband circuits for telecommunications applications.
LMV225TL
LMV225TL by Texas Instruments is a cellphone IC with a package style of grid array, very thin profile, and fine pitch. It operates in industrial temperature range from -40 to 85°C and has a nominal voltage of 2.7V. This RF and baseband circuit IC is designed for telecom applications requiring precise performance in compact spaces.
TRF370317IRGETG4
TRF370317IRGETG4 by Texas Instruments is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, RF and baseband circuit for telecom applications, and a compact square package style suitable for industrial use.
CC1151QRHBRG4Q1
CC1151QRHBRG4Q1 by Texas Instruments is a Cellphone IC with 32 terminals in a square chip carrier package. Operating temperature ranges from -40 to 125 °C, suitable for automotive applications. It features RF and baseband circuit for data rate of 0.25 Mbps, with power supplies at 1.8/3.6 V.
TRF3710IRGZR
TRF3710IRGZR by Texas Instruments is a cellphone IC with 48 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
TCM320AC56IPT
TCM320AC56IPT by Texas Instruments is a Cellphone IC with 48 terminals, operating at temperatures from -40 to 85°C. It features a 13-bit linear codec, companding law MU-LAW, and telecom IC type BASEBAND CIRCUIT. This low-profile flatpack package has a terminal pitch of 0.5mm and is ideal for industrial applications requiring fine-pitch technology.
RYZ014A000FZ00#HD0
Renesas Electronics
RF AND BASEBAND CIRCUIT; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
LTC5584IUF#PBF
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LTC5584IUF#TRPBF
LTC5588IPF-1#PBF
LTC5588IPF-1#TRPBF
LTC5590IUH#PBF
RF FRONT END CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LTC5590IUH#TRPBF
LTC5591IUH#PBF
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Nominal Supply Voltage: 3.3 V;
LTC5591IUH#TRPBF
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE;
LTC5592IUH#PBF
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE;
LTC5592IUH#TRPBF
LTC5594IUH#PBF
LTC5594IUH#PBF by Analog Devices is a cellphone IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 105°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
LTC5594IUH#TRPBF
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LTC5598IUF#TRPBF
LTC5599IUF#PBF
LTC5599IUF#PBF by Analog Devices is a cellphone IC with 24 terminals in a square chip carrier package. It operates at 3.3V, suitable for RF and baseband circuits. With a low profile of 0.8mm, it's ideal for compact mobile devices requiring high-performance telecom capabilities.
LTC5599IUF#TRPBF
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
Linear Technology
LTC5598IUF#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved