Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC346ALP3ETR is a RF attenuator with 30 dB attenuation, 18 dBm CW input power, and 1.92 VSWR. Ideal for variable attenuation in RF/microwave applications up to 14 GHz, it features GaAs technology, surface mounting, and operates b/w -40 °C to 85°C.
Median Price
$38.918
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$50.390
100+ parts
-
1k+ parts
$21.320
10k+ parts
Verical
$27.446
Digiode
$25.280
Vyrian
Chip Stock
Netsource Technology, Inc.
ComSIT Distribution GmbH
Parana Technologies
$2.399
$2.231
IDEA Electronic Components Group
$2.580
$2.451
DigiPath Technology Company
$4.025
$3.864
AZTECH Wire
$17.030
Semicontronic
$23.730
$23.137
$23.018
Corphita
$23.949
Authorized Procurement Solutions
Lixinc
RC Electronics
The use of plastic/epoxy material helps in keeping the product lightweight and cost-effective while providing adequate protection to the internal components.
The high maximum input power rating ensures that the attenuator can handle high power levels without any damage, making it suitable for various applications.
With a low VSWR value, this attenuator ensures minimal signal reflections and efficient power transfer, resulting in better overall performance.
The 30 dB nominal attenuation provides precise control over signal levels, making it ideal for applications that require accurate attenuation adjustments.
The component construction allows for easy integration into existing RF/microwave systems, providing flexibility and convenience to the users.
The 16 terminals offer multiple connection options, enabling versatile usage and compatibility with different system configurations.
The high maximum operating temperature ensures the attenuator's reliability and performance stability even in demanding environmental conditions.
The low minimum operating temperature allows the attenuator to function effectively in a wide range of temperatures, making it suitable for diverse applications.
The matte tin finish provides a reliable and durable terminal connection, ensuring long-term performance and connectivity.
The low insertion loss of 3.2 dB minimizes signal loss and distortion, preserving signal integrity and ensuring high-quality performance.
The GaAs technology used in the attenuator offers high linearity and low noise characteristics, making it suitable for demanding RF/microwave applications.
As a variable attenuator, this product allows for adjustable signal attenuation levels, providing flexibility and control in managing signal strength.
With a characteristic impedance of 50 ohm, this attenuator ensures compatibility with standard RF/microwave systems and components, simplifying integration.
The ability to operate at a minimum frequency of 0 MHz allows for wide frequency coverage and versatile application possibilities.
The surface mounting feature offers easy and secure installation on PCBs or other surfaces, facilitating convenient integration into systems.
With a high maximum operating frequency of 14000 MHz, this attenuator is suitable for high-frequency RF/microwave applications, providing versatility and performance.
RF/Microwave Attenuators HMC346ALP3ETR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Technology:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
HMC346ALP3ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - ADRF5x/HMCx 19/Apr/2022
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Panjit International
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Lite-on Semiconductor
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Changzhou Galaxy Century Microelectronics
Continental Device India
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Secos
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Won-top Electronics
HMC470LP3E
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC629LP4E
Analog Devices
Analog Devices' HMC629LP4E is a GAAS technology RF attenuator with 45 dB attenuation, 5 dB insertion loss, and 27.99 dBm max input power. Ideal for variable attenuation in RF/microwave applications up to 6 GHz, featuring a surface mount package with 24 terminals and operating temperatures from -40°C to +85°C.
HMC470ALP3E
HMC470ALP3E by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. It operates b/w -40 to 85°C and supports frequencies from 100 MHz to 3 GHz. Ideal for variable attenuation in RF/microwave circuits.
745
Lockheed Martin Microwave
VARIABLE ATTENUATOR; Construction: MODULE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.65;
HMC541LP3TR
VARIABLE ATTENUATOR;
17-6
Cobham Plc
17-6 by Cobham Plc is a RF/Microwave Attenuator with 6 dB Nominal Attenuation, 36.99 dBm Max Input Power (CW), and 1.2 Max VSWR. It is a FIXED ATTENUATOR module suitable for applications requiring precise signal attenuation in the frequency range of 0-18000 MHz at temperatures ranging from -50 to 85°C.
M1-2
The Cobham Plc M1-2 is a fixed attenuator with 2 dB nominal attenuation, handling up to 40 dBm CW input power. With a VSWR of 1.25, it operates in temperatures from -55°C to 125°C. Ideal for RF applications, this coaxial device has a frequency range of 0-12400 MHz and gold terminal finish.
HMC291TR
HMC291TR by Analog Devices is a GAAS technology RF attenuator with 12 dB attenuation and 1.6 dB insertion loss. It operates b/w 700 MHz to 4000 MHz, handling up to 28 dBm CW power. Ideal for RF/microwave applications, this surface-mount device has a max temperature range of -40 °C to 85°C.
HMC656LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
HMC939LP4E
HMC939LP4E by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 7.5 dB Max Insertion Loss, and 25.05 dBm Max Input Power (CW). It operates b/w 100 MHz to 33 GHz, making it ideal for signal attenuation in high-frequency applications. With a temperature range of -40°C to 85°C, it offers reliable performance in various environments.
LCAT1002-09
Infinite Electronics International
FIXED ATTENUATOR;
90-30-22
The Cobham Plc 90-30-22 is a fixed attenuator with 30 dB nominal attenuation, handling up to 46.99 dBm CW power and supporting frequencies from 0-18000 MHz. Ideal for RF applications, it boasts a low VSWR of 1.3 and operates in temperatures ranging from -55 to 125°C.
HMC470ALP3ETR
Analog Devices' HMC470ALP3ETR is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25 dBm Max Input Power, and 2 dB Max Insertion Loss. It operates b/w -40 to 85°C and supports frequencies from 100 MHz to 3 GHz. Ideal for variable attenuation in RF/microwave circuits with a characteristic impedance of 50 ohms.
MAX19790ETX+
Maxim Integrated
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Operating Frequency: 250 MHz;
HMC712LP3CE
Analog Devices' HMC712LP3CE is a RF/Microwave Attenuator with 28 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and GAAS Technology. It operates b/w -40 to 85 °C, has a frequency range of 5-26500 MHz, and is ideal for variable attenuation in RF/microwave applications.
HMC-C025
Analog Devices' HMC-C025 is a COAXIAL RF attenuator with 31.5 dB attenuation and 25 dBm CW input power. Ideal for applications requiring variable attenuation in the 0-13000 MHz frequency range, with a max insertion loss of 6 dB.
45
Api Technologies
FIXED ATTENUATOR; Maximum Operating Frequency: 1500 MHz; Terminal Finish: GOLD; Minimum Operating Frequency: 0 MHz; JESD-609 Code: e4; Maximum Voltage Standing Wave Ratio: 1.1;
HMC939LP4ETR
HMC939LP4ETR by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25.05 dBm Max Input Power (CW), and 8.5 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a Matte Tin finish, and is ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
151-70
Aeroflex Plainview
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Construction: COAXIAL; Maximum Operating Temperature: 75 Cel; Minimum Operating Frequency: 0 MHz;
RFSA2033TR7
Qorvo
The Qorvo RFSA2033TR7 is a 25 dB variable attenuator with max input power of 27 dBm. Ideal for RF applications, it operates from 50 MHz to 6 GHz, with a characteristic impedance of 50 ohms. This surface-mount component has a max supply current of 3.5 mA and can handle temperatures from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
HMC306MS10ETR
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Nominal Attenuation: 15.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15.5 dB;
HMC306AMS10E
Analog Devices' HMC306AMS10E is a GAAS technology RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 26.99 dBm CW input power handling. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz, such as RF and microwave systems.
HMC306MS10
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 700 MHz;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 15.5 dB;
HMC306MS10E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC306MS10TR
VARIABLE ATTENUATOR; Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 700 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 2.7 dB; Terminal Finish: Tin/Lead (Sn/Pb);
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Construction: COMPONENT; Maximum Input Power (CW): 28.06 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC346AMS8GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC346AMS8GETR
VARIABLE ATTENUATOR; Nominal Attenuation: 28 dB; Maximum Operating Frequency: 8000 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 17.78 dBm; Maximum Insertion Loss: 3.1 dB;
HMC307QS16G
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC307QS16GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC307QS16GERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): -5;
HMC307QS16GETR
HMC305ALP4E
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 2.5 dB; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
HMC305SLP4E
VARIABLE ATTENUATOR; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Minimum Operating Frequency: 400 MHz; Maximum Operating Frequency: 7000 MHz;
HMC307QS16GRTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3800 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 26.02 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved