Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.584
$2.403
IDEA Electronic Components Group
$2.778
$2.639
One Stop Electronics
$4.000
DigiPath Technology Company
$4.334
$4.160
Ampacity Inc.
$6.000
AZTECH Wire
$9.000
$8.640
$8.470
$8.300
Semicontronic
$28.000
$27.300
$27.160
Corphita
RF/Microwave Attenuators HMC307QS16GRTR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Maximum Supply Current:
Technology:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Grande Electronics
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Eic Semiconductor
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Good-ark Electronics
40-40-33
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-C-39012; MIL-DTL-3933; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 1500 MHz; Additional Features: N-F, I/P POWER-MAX(PEAK)=10000W; MIL-STD-348;
90-30-22
Aeroflex/inmet
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 46.99 dBm;
AT65-0107TR
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Nominal Attenuation: 31.5 dB; Additional Features: TTL COMPATIBLE; Maximum Input Power (CW): 33.98 dBm;
47-10-21
Cobham Plc
FIXED ATTENUATOR; Construction: COAXIAL; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 46.99 dBm; Characteristic Impedance: 50 ohm; Nominal Attenuation: 10 dB;
44-1
44-1 by Cobham Plc is a RF/Microwave Attenuator with max input power of 36.99 dBm, VSWR of 1.25, and attenuation of 1 dB. It operates in the frequency range of 0-18000 MHz, ideal for signal attenuation in various RF/microwave applications due to its coaxial construction and gold terminal finish.
A-0805-C-00DB
International Manufacturing Services
A-0805-C-00DB by International Manufacturing Services is a RF/Microwave Attenuator with 20 dBm CW power, 1.3 VSWR, and 0 dB nominal attenuation. It operates b/w -55°C to 125°C, suitable for fixed attenuator applications in the frequency range of 0-10000 MHz.
R411820124
Radiall S A
R411820124 by Radiall S A is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3. Ideal for RF applications, it operates from -40°C to 85°C within the frequency range of 0-3000 MHz.
HMC346C8TR
Analog Devices
Analog Devices' HMC346C8TR is a GaAs technology RF attenuator with 8 terminals. It operates b/w -40 °C to 85°C, ideal for RF/microwave applications. This surface-mount variable attenuator is housed in a ceramic package, ensuring reliable performance.
HMC802ALP3E
HMC802ALP3E by Analog Devices is a RF/Microwave Attenuator with a max input power of 29.3 dBm and nominal attenuation of 20 dB. It operates at frequencies up to 10 GHz and is commonly used in applications requiring fixed attenuation, such as wireless communication systems.
17-2
The Cobham Plc 17-2 is a fixed attenuator with 2 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0-18000 MHz. This RF/Microwave device has a VSWR of 1.2, operates b/w -50°C to +85°C, and features a gold terminal finish for high-quality connections in various applications.
3014-120
Aeroflex/weinschel
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz;
MAAVSS0006TR-3000
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 3; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 20.97 dBm; Maximum Operating Frequency: 2500 MHz; Terminal Finish: Matte Tin (Sn);
TGL4203
Qorvo
TGL4203 by Qorvo is a RF/Microwave attenuator with 23.98 dBm CW power, 17 dB nominal attenuation, and 2 dB max insertion loss. It's a variable attenuator for frequencies from 0-50 GHz, ideal for RF/microwave signal control in various applications.
LCAT1004-30
L-com
FIXED ATTENUATOR;
56-10
FIXED ATTENUATOR; Construction: COAXIAL; Terminal Finish: GOLD; Additional Features: 3.5 MM, I/P POWER-MAX(PEAK)=500W; JESD-609 Code: e4; Nominal Attenuation: 10 dB;
44
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Input Power (CW): 36.99 dBm;
54-6
54-6 by Cobham Plc is a RF/Microwave Attenuator with 6 dB nominal attenuation, 1.6 max VSWR, and 33.01 dBm max input power (CW). Constructed coaxially with gold terminal finish, it operates from -55°C to 125°C. Ideal for fixed attenuator applications in the frequency range of 0-40000 MHz.
779-7
L-3 Narda-miteq
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.4; Maximum Operating Frequency: 18000 MHz; Nominal Attenuation: 7 dB; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm;
9-6
FIXED ATTENUATOR; Maximum Operating Frequency: 26500 MHz; Maximum Input Power (CW): 33.01 dBm; Minimum Operating Temperature: -55 Cel; Nominal Attenuation: 6 dB; Construction: COAXIAL;
HMC540LP3
HMC540LP3 by Analog Devices is a RF/Microwave Attenuator with 15 dB Nominal Attenuation, 29 dBm Max Input Power (CW), and 2.6 dB Max Insertion Loss. It operates in the frequency range of 0-5500 MHz and is ideal for applications requiring variable attenuation in RF systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
HMC306MS10ETR
Hittite Microwave
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Nominal Attenuation: 15.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15.5 dB;
HMC306AMS10E
Analog Devices' HMC306AMS10E is a GAAS technology RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 26.99 dBm CW input power handling. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz, such as RF and microwave systems.
HMC306MS10
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 700 MHz;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 15.5 dB;
HMC306MS10E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC306MS10TR
VARIABLE ATTENUATOR; Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 700 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 2.7 dB; Terminal Finish: Tin/Lead (Sn/Pb);
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Construction: COMPONENT; Maximum Input Power (CW): 28.06 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC346AMS8GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC346AMS8GETR
VARIABLE ATTENUATOR; Nominal Attenuation: 28 dB; Maximum Operating Frequency: 8000 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 17.78 dBm; Maximum Insertion Loss: 3.1 dB;
HMC307QS16G
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC307QS16GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC307QS16GERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): -5;
HMC307QS16GETR
HMC305ALP4E
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 2.5 dB; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
HMC305SLP4E
VARIABLE ATTENUATOR; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Minimum Operating Frequency: 400 MHz; Maximum Operating Frequency: 7000 MHz;
HMC305ALP4
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3800 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 26.02 dBm;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: 2.7 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved