Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC306MS10E is a RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 28.06 dBm max input power. Ideal for variable attenuation in RF/microwave applications from 700 MHz to 3800 MHz, featuring GAAS technology and surface mounting feature.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
North Shore Components
Nova Conductors
Aztec Data Supply Inc.
$1.199
Parana Technologies
$1.217
$1.132
IDEA Electronic Components Group
$1.309
$1.244
DigiPath Technology Company
$2.042
$1.960
Corohmni
$2.469
Semicontronic
$8.000
$7.800
$7.760
AZTECH Wire
$11.129
Ampacity Inc.
$13.000
One Stop Electronics
$20.000
Lixinc
RC Electronics
$3.970
$3.600
$3.470
Continental Prestige Electronics
GreenTree Electronics
S.R.D Solutions
Argo Parts USA
Corphita
Bastille Electronics
Perfect Parts
Authorized Procurement Solutions
The use of plastic/epoxy as the package body material provides durability and ensures reliable performance in various operating conditions.
With a high maximum input power capacity, this attenuator can handle strong signals without risk of damage or performance degradation.
The significant attenuation level allows for precise control over signal strength, making this attenuator useful in various RF/microwave applications.
The component-based construction ensures high quality and reliability in performance, making this attenuator a dependable choice for RF/microwave systems.
This attenuator can be powered using standard voltage supplies of 3V or 5V, offering flexibility in integration with different systems.
With a higher number of terminals, this attenuator provides more connection options and versatility in setup configurations.
The high maximum operating temperature range allows the attenuator to perform reliably even in elevated temperature environments.
The low minimum operating temperature ensures that the attenuator can function effectively in colder conditions without any performance issues.
The matte tin finish on the terminals provides good conductivity and corrosion resistance, ensuring stable connections for optimal signal transmission.
With a low maximum insertion loss, this attenuator minimizes signal loss during transmission, maintaining signal integrity and quality.
The use of Gallium Arsenide (GaAs) technology in this attenuator ensures high-frequency performance and low noise, making it suitable for RF/microwave applications.
Being a variable attenuator, this product allows adjustable attenuation levels for precise signal control, making it ideal for testing and calibration purposes.
With a standard characteristic impedance of 50 ohms, this attenuator is compatible with a wide range of RF/microwave systems and components.
The attenuator's ability to operate at frequencies as low as 700 MHz makes it suitable for various RF/microwave applications with lower frequency requirements.
The surface mount design of this attenuator allows for easy and secure installation on PCBs or other surfaces, simplifying integration into electronic systems.
With a high maximum operating frequency, this attenuator is capable of handling high-frequency signals, making it suitable for a wide range of RF/microwave applications.
RF/Microwave Attenuators HMC306MS10E attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC306MS10E RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IRLML6402TRPBF
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
Formosa Microsemi
PE43620A-Z
Psemi
VARIABLE ATTENUATOR;
RFSA2033TR7
Rf Micro Devices
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 3.5 mA; Maximum Operating Temperature: 85 Cel;
86-10-66
Api Technologies
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 22000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
HMC472ALP4
Analog Devices
Analog Devices' HMC472ALP4 is a GAAS technology RF attenuator with 31.5 dB attenuation, 3 dB insertion loss, and 1.22 VSWR. Ideal for applications requiring precise signal control in the frequency range of 0-3800 MHz, such as wireless communication systems and radar equipment.
44-1
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Minimum Operating Frequency: 0 MHz; JESD-609 Code: e4; Terminal Finish: GOLD; Maximum Operating Frequency: 18000 MHz;
HMC624ALP4ETR
Hittite Microwave
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
LCAT1001-05
L-com
FIXED ATTENUATOR;
47-10-14
IXYS Corporation
IXYS Corporation's 47-10-14 is a COAXIAL fixed attenuator with 10 dB nominal attenuation, handling up to 46.99 dBm CW power and supporting frequencies from 0 to 18000 MHz. Ideal for RF applications due to its low VSWR of 1.35 and operating temperatures ranging from -55°C to 125°C.
1-1
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Temperature: 125 Cel; Construction: COAXIAL; Maximum Input Power (CW): 40 dBm;
HMC658LP2E
Analog Devices' HMC658LP2E is a 20 dB fixed attenuator with 25 dBm CW input power, ideal for RF applications. Constructed with plastic/epoxy, it has a characteristic impedance of 50 ohm and operates from -40 to 85°C. Suitable for surface mount installations, it covers frequencies from 0 to 25 GHz.
66-10-11
Aeroflex/weinschel
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Terminal Finish: Gold (Au); Maximum Input Power (CW): 51.76 dBm; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz;
66-10-33
FIXED ATTENUATOR; Additional Features: N-F, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 10 dB; Minimum Operating Frequency: 0 MHz;
HMC8073LP3DE
HMC8073LP3DE by Analog Devices is a RF attenuator with 31.5 dB attenuation and 2.2 dB insertion loss, suitable for frequencies b/w 600 MHz to 3000 MHz. It operates at temperatures from -40°C to 85°C, has a max input power of 30 dBm, and requires a 5V power supply. Ideal for applications requiring precise signal control in RF/microwave systems.
59-3-32
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-C-39012; MIL-DTL-3933; Terminal Finish: Gold (Au); Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 3 dB;
HV-AT(20)-PJ
Hirose Electric
HV-AT(20)-PJ by Hirose Electric is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.6. Ideal for RF applications, it operates b/w -10°C to 65°C with characteristic impedance of 50 ohm.
ADRF5473
55-5
Cobham Plc
55-5 by Cobham Plc is a RF/Microwave Attenuator with 5 dB Nominal Attenuation, 1.35 Max VSWR, and 36.99 dBm Max Input Power (CW). It is a COAXIAL device with GOLD terminal finish, operating from -55°C to 125°C. Ideal for applications requiring fixed attenuation in the frequency range of 0-18000 MHz.
17-4
Cobham Plc's 17-4 is a RF/Microwave Attenuator with max input power of 36.99 dBm, VSWR of 1.2, and nominal attenuation of 4 dB. It is a fixed attenuator module with gold terminal finish, operating temperature range of -50 to 85 °C, and frequency range from 0 to 18000 MHz.
HMC290
HMC290 by Analog Devices is a RF/Microwave Attenuator with 6dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and 1.2 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring attenuation in the frequency range of 700MHz to 4000MHz.
44-9
FIXED ATTENUATOR; JESD-609 Code: e4; Terminal Finish: Gold (Au); Maximum Voltage Standing Wave Ratio: 1.25; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
HMC306MS10ETR
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Nominal Attenuation: 15.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15.5 dB;
HMC306AMS10E
Analog Devices' HMC306AMS10E is a GAAS technology RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 26.99 dBm CW input power handling. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz, such as RF and microwave systems.
HMC306MS10
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 700 MHz;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 15.5 dB;
HMC306MS10E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC306MS10TR
VARIABLE ATTENUATOR; Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 700 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 2.7 dB; Terminal Finish: Tin/Lead (Sn/Pb);
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Construction: COMPONENT; Maximum Input Power (CW): 28.06 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC346AMS8GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC346AMS8GETR
VARIABLE ATTENUATOR; Nominal Attenuation: 28 dB; Maximum Operating Frequency: 8000 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 17.78 dBm; Maximum Insertion Loss: 3.1 dB;
HMC307QS16G
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC307QS16GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC307QS16GERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): -5;
HMC307QS16GETR
HMC305ALP4E
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 2.5 dB; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
HMC305SLP4E
VARIABLE ATTENUATOR; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Minimum Operating Frequency: 400 MHz; Maximum Operating Frequency: 7000 MHz;
HMC307QS16GRTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3800 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 26.02 dBm;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 31 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved