Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Maximum Voltage Standing Wave Ratio: 1.25; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Terminal Finish: GOLD;
Median Price
$14.950
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
RS (Exports)
1+ parts
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$17.500
Mouser Electronics
$90.390
TTI
$0.022
Master Electronics
$1.450
Netroflash
$17.150
Argo Parts USA
RF/Microwave Attenuators 1-8 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
MAATCC0005
M/a-com Technology Solutions
VARIABLE ATTENUATOR; JESD-609 Code: e3; Nominal Attenuation: 31.5 dB; Maximum Insertion Loss: 4.2 dB; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
HMC8801
Analog Devices
Analog Devices' HMC8801 is a RF/Microwave Attenuator with 27 dB Nominal Attenuation, 18 dBm Max Input Power (CW), and 2.5 dB Max Insertion Loss. It operates from -40 to 85 °C, suitable for applications requiring precise signal attenuation in the frequency range of 0-20 GHz.
HMC306AMS10E
Analog Devices' HMC306AMS10E is a GAAS technology RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 26.99 dBm CW input power handling. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz, such as RF and microwave systems.
66-10-13
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
2-10
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: COAXIAL; JESD-609 Code: e4; Maximum Input Power (CW): 36.99 dBm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Terminal Finish: GOLD;
HMC540LP3TR
Analog Devices' HMC540LP3TR is a RF/Microwave Attenuator with 29 dBm CW input power, 15 dB attenuation, and 2.6 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-5500 MHz.
HMC274QS16ETR
Analog Devices' HMC274QS16ETR is a GaAs technology RF attenuator with 16 terminals, operating from -40°C to 85°C. It has a voltage range of 3-5V and is a variable attenuator for RF/microwave applications. The surface-mount package body material is plastic/epoxy, making it suitable for various communication systems.
5404
Smiths Group Plc
5404 by Smiths Group Plc is a RF/Microwave Attenuator with 4 dB Nominal Attenuation, 43.01 dBm Max Input Power (CW), and 1.35 Max VSWR. It is a FIXED ATTENUATOR module suitable for applications requiring attenuation in the frequency range of 0-2500 MHz at temperatures from -55 to 150°C.
268-30-33-LIM
268-30-33-LIM by Api Technologies is a COAXIAL fixed attenuator with 30 dB nominal attenuation, 50 dBm CW input power, and 1.2 max VSWR. Ideal for RF/Microwave applications, it operates from -55°C to 100°C, has a characteristic impedance of 50 ohm, and supports frequencies from 0 MHz to 6 GHz.
44-20
Cobham Plc
44-20 by Cobham Plc is a fixed attenuator with 20 dB nominal attenuation, suitable for RF/Microwave applications. It has a max input power of 36.99 dBm and a VSWR of 1.25, operating in the frequency range of 0-18000 MHz. Built with COAXIAL construction, it can withstand temperatures from -50 to 85°C, making it ideal for high-power RF systems.
779-8
Lockheed Martin Microwave
Lockheed Martin Microwave's 779-8 is a fixed attenuator module with max input power of 33.01 dBm and VSWR of 1.4, operating from 0-18000 MHz. Ideal for RF applications requiring precise signal attenuation in high-power environments.
3034
VARIABLE ATTENUATOR; Maximum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 30 dBm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: .3 dB;
HMC306MS10E
Analog Devices' HMC306MS10E is a RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 28.06 dBm max input power. Ideal for variable attenuation in RF/microwave applications from 700 MHz to 3800 MHz, featuring GAAS technology and surface mounting feature.
4208
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 8000 MHz; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Maximum Voltage Standing Wave Ratio: 1.35;
HMC288MS8E
Analog Devices' HMC288MS8E is a RF/Microwave Attenuator with 14 dB Nominal Attenuation, 2.3 dB Max Insertion Loss, and 28.06 dBm Max Input Power (CW). It operates b/w -40 to 85°C and covers frequencies from 700 MHz to 3700 MHz. Ideal for variable attenuation in RF/microwave applications.
44-30
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Frequency: 18000 MHz; JESD-609 Code: e4; Minimum Operating Temperature: -50 Cel;
32-9.5
32-9.5 by Cobham Plc is a fixed attenuator with a nominal attenuation of 9.5 dB, suitable for RF/Microwave applications. It has a max input power of 33.01 dBm and can operate b/w -55 to 125°C, covering frequencies from 0 to 18 GHz with a VSWR of 1.35 for precise signal control in various systems.
HMC539ALP3E
Analog Devices' HMC539ALP3E is a RF/Microwave Attenuator with 7.75 dB attenuation and 1.7 dB insertion loss, suitable for applications requiring variable attenuation in the frequency range of 0-4000 MHz. This component has a max input power of 29 dBm, operates at temperatures from -40 to 85°C, and features a GaAs technology construction with matte tin terminal finish.
82-40-11
FIXED ATTENUATOR; Additional Features: 7/16-F, I/P POWER-MAX(PEAK)=10000W; Construction: COAXIAL; JESD-609 Code: e4; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Temperature: 125 Cel;
G40
Wj Communications
VARIABLE ATTENUATOR; Construction: MODULE; Minimum Operating Temperature: -54 Cel; Maximum Voltage Standing Wave Ratio: 2.3; Minimum Operating Frequency: 500 MHz; Maximum Insertion Loss: 4 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-8
FIXED ATTENUATOR; Terminal Finish: GOLD; Nominal Attenuation: 8 dB; Minimum Operating Temperature: -55 Cel; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 12400 MHz;
Cobham Plc's 1-8 is a RF fixed attenuator with 8 dB nominal attenuation, handling up to 36.99 dBm CW power. With a VSWR of 1.25, it operates in the frequency range of 0-12400 MHz, making it ideal for applications requiring precise signal control in high-power RF systems.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved