Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3000 MHz; Maximum Voltage Standing Wave Ratio: 1.7; Nominal Attenuation: 30 dB; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 3.1 dB;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Authorized Procurement Solutions
Aranea Global
RF/Microwave Attenuators AT65-0233 attributes and parameters. Explore more RF/Microwave Attenuators devices from Tyco Electronics M/a-com
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
M/A-Com began as Microwave Associates in 1950, supplying magnetrons to the U.S. Army Signal Corps. In 1978, Microwave Associates changed its name to M/A-Com, Inc. to reflect its involvement in the growing communications market. M/A-Com was acquired by AMP, who was subsequently acquired by Tyco Electronics. Tyco Electronics sold the M/A-Com RF Components business unit to UK-based Cobham plc and the company is now operated as MA-Com Technology Solutions. Today, MA-Com Technology Solutions is established as an industry-leading developer and high-volume manufacturer of RF, microwave and millimeter wave semiconductors, components and technologies. Long recognized as a pioneer in microwave and radio frequency (RF) technology, MA-Com holds hundreds of patents in the field. Some of the major markets MA-Com currently serves are wireless telecommunications, aerospace & defense and automotive
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Dc Components
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Hitano Enterprise
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
ADRF5720BCCZN-R7
Analog Devices
Analog Devices' ADRF5720BCCZN-R7 is a CMOS RF attenuator with 31.5 dB attenuation and 27.99 dBm CW input power, suitable for applications requiring variable attenuation in the frequency range of 0.009-40000 MHz. With a 50 ohm characteristic impedance, it operates at temperatures from -40 to 105°C and has a surface mount package with 24 terminals.
47-10-14
Api Technologies
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 46.99 dBm;
M3933/25-36N
Sv Microwave
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 125 Cel;
HMC655LP2E
Hittite Microwave
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Terminal Finish: Tin (Sn);
MAATCC0005-TB
M/a-com Technology Solutions
MAATCC0005-TB by M/a-com Technology Solutions is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 2 VSWR, and 33.98 dBm Max Input Power. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-2000 MHz.
PAT1220-C-0DB-T5
Susumu
The Susumu PAT1220-C-0DB-T5 is a fixed attenuator with 0 dB nominal attenuation, 20 dBm CW input power, and 1.3 max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-10000 MHz, operating from -55 to 125°C.
HMC306MS10
HMC306MS10 by Analog Devices is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 28.06 dBm Max Input Power (CW), and 2.7 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 700 MHz to 3800 MHz.
4R-6
Aeroflex/weinschel
FIXED ATTENUATOR; Construction: MODULE; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Input Power (CW): 33.01 dBm; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
MAAD-011045-TR0500
VARIABLE ATTENUATOR;
90-30-31
Aeroflex/inmet
FIXED ATTENUATOR; Construction: COAXIAL; Nominal Attenuation: 30 dB; Maximum Input Power (CW): 46.99 dBm; Minimum Operating Frequency: 0 MHz; Additional Features: SMA-F; N-F, I/P POWER-MAX(PEAK)=1000W;
45-3-44
FIXED ATTENUATOR; Maximum Operating Frequency: 1500 MHz; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm; Nominal Attenuation: 3 dB; Minimum Operating Frequency: 0 MHz;
IXYS Corporation
IXYS Corporation's 47-10-14 is a COAXIAL fixed attenuator with 10 dB nominal attenuation, handling up to 46.99 dBm CW power and supporting frequencies from 0 to 18000 MHz. Ideal for RF applications due to its low VSWR of 1.35 and operating temperatures ranging from -55°C to 125°C.
4205
Smiths Group Plc
FIXED ATTENUATOR; Additional Features: SMA-F; SMA-M; Maximum Operating Temperature: 150 Cel; Maximum Operating Frequency: 8000 MHz; JESD-609 Code: e4; Minimum Operating Frequency: 0 MHz;
F2258NLGK8
Integrated Device Technology
RF/Microwave Attenuators; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
FIXED ATTENUATOR; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Additional Features: N-M, I/P POWER-MAX(PEAK)=10000W; Maximum Input Power (CW): 56.99 dBm;
32-9.5
Cobham Plc
32-9.5 by Cobham Plc is a fixed attenuator with a nominal attenuation of 9.5 dB, suitable for RF/Microwave applications. It has a max input power of 33.01 dBm and can operate b/w -55 to 125°C, covering frequencies from 0 to 18 GHz with a VSWR of 1.35 for precise signal control in various systems.
HMC941ALP4E
Analog Devices' HMC941ALP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 6.5 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
2031-2
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Additional Features: N-F; SMA-F, I/P POWER-MAX(PEAK)=250W; Construction: COAXIAL; Minimum Operating Temperature: -65 Cel; JESD-609 Code: e4;
MTVA0300N09WB1
Smiths Group Plc's MTVA0300N09WB1 is a RF/Microwave Attenuator with 3dB attenuation, 23.01 dBm CW input power, and 1.3 VSWR. It operates from -55°C to 150°C, covering frequencies from 0-12400 MHz. Ideal for fixed attenuator applications due to its 50 ohm impedance and tin/lead terminal finish.
19-9-2
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT65-0107TR
M/a-com
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
TE Connectivity
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Nominal Attenuation: 31.5 dB; Additional Features: TTL COMPATIBLE; Maximum Input Power (CW): 33.98 dBm;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
AT65-0233
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: Tin/Lead (Sn/Pb);
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: .4 mA;
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.7; Construction: COMPONENT; Maximum Input Power (CW): 34 dBm; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
AT65-0106
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 50 dB; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 2; Minimum Operating Frequency: 0 MHz;
AT65-0107
VARIABLE ATTENUATOR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Insertion Loss: 4.2 dB; Additional Features: TTL COMPATIBLE; Maximum Input Power (CW): 33.98 dBm; Minimum Operating Frequency: 0 MHz;
AT65-0213
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.8 dB; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 33.98 dBm; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm;
AT65-0263
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.8; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e0; Maximum Input Power (CW): 33.98 dBm; Nominal Attenuation: 31 dB;
AT65-0283
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 2; JESD-609 Code: e0; Maximum Operating Frequency: 2000 MHz; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 15.5 dB;
AT65-0106TR
VARIABLE ATTENUATOR; Maximum Operating Frequency: 2000 MHz; Maximum Insertion Loss: 4.7 dB; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Additional Features: TTL COMPATIBLE;
AT65-0413TR
VARIABLE ATTENUATOR; Maximum Operating Temperature: 85 Cel; Additional Features: TTL COMPATIBLE; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
AT65-0413
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3000 MHz; Maximum Input Power (CW): 33.98 dBm; Maximum Insertion Loss: 2.4 dB; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
AT65-0233TR
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 33.98 dBm; Maximum Voltage Standing Wave Ratio: 1.7; Maximum Operating Frequency: 3000 MHz; Additional Features: TTL COMPATIBLE;
AT65-0263TR
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Input Power (CW): 33.98 dBm; Maximum Operating Temperature: 85 Cel; Additional Features: TTL COMPATIBLE;
AT65-0283TR
VARIABLE ATTENUATOR; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 2000 MHz; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 15.5 dB; Construction: COMPONENT;
VARIABLE ATTENUATOR; Nominal Attenuation: 30 dB; Minimum Operating Frequency: 0 MHz; Maximum Insertion Loss: 3.1 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
AT65-0213TR
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3000 MHz; Additional Features: TTL COMPATIBLE; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 33.98 dBm; Nominal Attenuation: 15 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved