Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's ATS-1M1F-03DB2W is a RF/Microwave Attenuator with 3 dB nominal attenuation and max input power of 33.01 dBm. It has a max voltage standing wave ratio of 1.25 and can operate in temperatures ranging from -55 to 125 °C. This fixed attenuator is suitable for panel mount applications in the frequency range of 0 to 6000 MHz, meeting MIL-STD-202 and MIL-STD-348A standards.
Median Price
$52.076
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Master Electronics
1+ parts
$48.430
100+ parts
$34.910
1k+ parts
$34.170
10k+ parts
-
TTI Europe
$48.500
$35.620
$34.920
Element14
$51.038
$41.750
Farnell
$57.627
$49.346
DigiKey
$63.060
$45.567
Mouser Electronics
$63.750
$50.950
Verical
$53.113
Powell Electronics
$39.200
Electro Sonic
$55.800
$34.400
$33.500
IBS Electronics
$80.784
$61.373
$61.079
VNN
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$1.520
AZTECH Wire
$13.643
Semicontronic
$27.590
$26.900
$26.762
Gateway Technologies
$33.230
$29.574
Corohmni
Advanced Electronics
$34.227
$32.516
Singapore Electronics
$36.552
$33.993
$32.531
$31.069
Continental Prestige Electronics
$41.940
$35.390
Ampacity Inc.
$60.050
Argo Parts USA
Bastille Electronics
Allows for high-power handling, suitable for demanding RF/Microwave applications.
Ensures reliable performance and ruggedness, making it ideal for harsh environments.
Provides excellent impedance matching and signal integrity, reducing reflection and signal distortion.
Offers precise signal attenuation, enabling accurate power control in RF/Microwave systems.
Guarantees reliable signal transmission and low insertion loss, essential for critical RF/Microwave applications.
Withstands high-temperature environments, ensuring stable performance in extreme conditions.
Functions reliably in cold environments, suitable for a wide range of operating conditions.
Designed specifically for precise and consistent signal attenuation, meeting the needs of RF/Microwave systems.
Matches common RF/Microwave devices' impedance, ensuring efficient power transfer and signal integrity.
Provides versatility for use across different frequency ranges, accommodating various RF/Microwave applications.
Facilitates easy installation and integration into equipment or systems, enhancing flexibility and convenience.
Covers a broad frequency range, making it suitable for a wide range of RF/Microwave applications.
RF/Microwave Attenuators ATS-1M1F-03DB2W attributes and parameters. Explore more RF/Microwave Attenuators devices from Amphenol
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Screening Level:
Maximum Voltage Standing Wave Ratio:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
General Semiconductor
Hitano Enterprise
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
MAX19790ETX+
Analog Devices
MAX19790ETX+ by Analog Devices is a 36-terminal RF attenuator with 22 dB nominal attenuation and 7 dB max insertion loss. Operating from -40 to 85°C, it supports frequencies from 250 MHz to 4 GHz. Ideal for RF/Microwave applications requiring precise signal control in a compact surface-mount package.
ADRF5721BCCZN
Analog Devices' ADRF5721BCCZN is a RF attenuator with 30 dB nominal attenuation and 27 dBm CW input power. It operates from 0.009 MHz to 40 GHz, ideal for variable attenuation in RF/microwave applications. With a compact 16-terminal surface mount package, it offers precise control over signal levels in high-frequency circuits.
HMC424AG16
Analog Devices' HMC424AG16 is a GAAS technology RF attenuator with 31.5 dB attenuation and 3.6 dB insertion loss at 3000 MHz. It operates from -40 to 85 °C, handles up to 24.5 dBm CW power, and has a characteristic impedance of 50 ohm. Ideal for RF/microwave applications requiring precise signal control in compact designs.
3205-1
Cobham Plc
Cobham Plc's 3205-1 is a COAXIAL RF attenuator with max input power of 30 dBm, VSWR of 1.35, and nominal attenuation of 70 dB. Ideal for RF/Microwave applications up to 2000 MHz, it offers variable attenuation with low insertion loss and operates b/w -55°C to 71°C.
YAT-10+
Mini-circuits
YAT-10+ by Mini-circuits is a 50 ohm fixed attenuator with 10.87 dB nominal attenuation, handling up to 33.01 dBm CW power and VSWR of 1.9. Ideal for RF/Microwave applications, it operates from -40°C to 85°C across frequencies ranging from DC to 18 GHz.
2067-9
2067-9 by Cobham Plc is a fixed attenuator with 9 dB nominal attenuation, suitable for RF/Microwave applications. It has a max input power of 30 dBm and a VSWR of 1.25, making it ideal for use in high-frequency environments up to 12400 MHz. With COAXIAL construction and GOLD terminal finish, it operates b/w -20°C to 75°C efficiently.
HMC941LP4E
Analog Devices' HMC941LP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 6.5 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 100 MHz to 33 GHz.
82-40-22
Api Technologies
FIXED ATTENUATOR; Terminal Finish: GOLD; Maximum Operating Frequency: 3000 MHz; Nominal Attenuation: 40 dB; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
AT65-0107TR
M/a-com
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
87-01
Api Technologies' 87-01 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.25, and nominal attenuation of 1 dB. Ideal for fixed attenuator applications in military and high-frequency communication systems due to its MIL-A-3933 screening level and wide operating temperature range (-55 to 100 °C).
LCAT1001-02
L-com
FIXED ATTENUATOR;
5413
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Terminal Finish: Nickel (Ni); Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 43.01 dBm; Construction: MODULE;
YAT-3A+
YAT-3A+ by Mini-circuits is a RF attenuator with 2.9 dB attenuation, 1.9 VSWR, and 33.01 dBm CW power handling. Ideal for fixed attenuation in RF/microwave applications up to 18 GHz with GAAS technology and surface mounting feature.
4775
L-3 Narda-miteq
TS9503T3
Smiths Group Plc
TS9503T3 by Smiths Group Plc is a RF/Microwave Attenuator with 20 dBm CW power, 1.5 VSWR, and 3 dB attenuation. It operates from -55°C to 150°C, covering frequencies from 0-18000 MHz. Ideal for fixed attenuator applications due to its 50 ohm impedance and tin/lead terminal finish.
45-3-43
FIXED ATTENUATOR; Terminal Finish: Gold (Au); Maximum Input Power (CW): 56.99 dBm; Maximum Operating Frequency: 1500 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.1;
86-10-66
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 22000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
HMC290ETR
Analog Devices' HMC290ETR is a RF attenuator with 6dB attenuation, 1.2dB insertion loss, and 28dBm CW input power. It operates from 700MHz to 4GHz, ideal for variable attenuation in RF/microwave applications. The surface-mount device has a GaAs technology construction and can handle temperatures from -40 °C to 85°C.
HMC290
HMC290 by Analog Devices is a RF/Microwave Attenuator with 6dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and 1.2 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring attenuation in the frequency range of 700MHz to 4000MHz.
M3933/25-36S
Cinch Connectivity Solutions
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=500W; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Minimum Operating Frequency: 0 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATS-1M1F-10DB2W
Amphenol
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Nominal Attenuation: 10 dB; Maximum Operating Frequency: 6000 MHz; Maximum Input Power (CW): 33.01 dBm;
ATS-1M1F-06DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Construction: COAXIAL; Nominal Attenuation: 6 dB; Maximum Operating Temperature: 125 Cel;
ATS-1M1F-15DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Additional Features: N-F; N-M; Maximum Operating Frequency: 6000 MHz; Nominal Attenuation: 15 dB;
ATS-1M1F-20DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Construction: COAXIAL;
ATS-1M1F-30DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 6000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved