Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's ATS-1M1F-10DB2W is a RF fixed attenuator with 10 dB nominal attenuation, 1.3 max VSWR, and 33.01 dBm CW power handling. It operates from -55°C to 125°C, suitable for MIL-STD environments. Ideal for applications requiring precise signal attenuation in the frequency range of 0-6000 MHz.
Median Price
$59.340
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$44.480
100+ parts
$36.540
1k+ parts
-
10k+ parts
Master Electronics
$59.140
$44.930
$44.810
DigiKey
$46.052
Mouser Electronics
$46.050
Verical
$69.576
$56.271
Newark
$74.640
$61.480
Element14
$74.900
$59.390
Powell Electronics
$39.390
Electro Sonic
$52.600
$33.190
$32.460
IBS Electronics
$111.178
$61.955
$61.800
Vyrian
VNN
Nova Conductors
AZTECH Wire
$1.530
$1.470
$1.440
$1.410
Ampacity Inc.
$27.730
Gateway Technologies
$31.261
$27.822
Continental Prestige Electronics
$32.090
$30.950
Singapore Electronics
$34.387
$31.979
$30.604
$29.228
Argo Parts USA
Netroflash
High maximum input power allows for reliable performance and protection against damage from excessive power levels.
Compliance with military standards ensures high quality and reliability in demanding applications.
Low VSWR ensures efficient power transfer and minimal signal reflection.
Provides a consistent level of signal attenuation for precise signal control.
Coaxial construction offers high performance and durability for RF/microwave signal attenuation.
Wide operating temperature range allows for versatile use in various environmental conditions.
Wide temperature range ensures reliable operation even in extreme cold conditions.
Fixed attenuators provide consistent and reliable signal attenuation for RF/microwave applications.
Standard 50 ohm impedance ensures compatibility with a wide range of RF/microwave devices and systems.
Supports operation at lower frequencies for versatile use in various RF/microwave applications.
Panel mount design allows for easy installation and integration into RF/microwave systems.
Wide operating frequency range makes it suitable for a variety of RF and microwave applications.
RF/Microwave Attenuators ATS-1M1F-10DB2W attributes and parameters. Explore more RF/Microwave Attenuators devices from Amphenol
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Screening Level:
Maximum Voltage Standing Wave Ratio:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Weitron Technology
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Formosa Microsemi
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
HMC653LP2ETR
Analog Devices
HMC653LP2ETR by Analog Devices is a surface mount RF/microwave attenuator with 6 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This fixed attenuator is commonly used in applications requiring precise signal attenuation.
59-3-12
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-DTL-3933; JESD-609 Code: e4; Terminal Finish: Gold (Au); Additional Features: SMK-F; SMK-M, I/P POWER-MAX(PEAK)=10000W;
HMC470LP3ETR
Analog Devices' HMC470LP3ETR is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 2 dB Max Insertion Loss. It operates from -40 to 85°C, has a GaAs technology, and is suitable for variable attenuation in RF/microwave applications up to 3 GHz.
TS0503F
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Operating Temperature: 150 Cel; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 20 dBm; Minimum Operating Frequency: 0 MHz;
AT65-0233
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3000 MHz; Maximum Voltage Standing Wave Ratio: 1.7; Nominal Attenuation: 30 dB; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 3.1 dB;
YAT-10+
Mini-circuits
YAT-10+ by Mini-circuits is a 50 ohm fixed attenuator with 10.87 dB nominal attenuation, handling up to 33.01 dBm CW power and VSWR of 1.9. Ideal for RF/Microwave applications, it operates from -40°C to 85°C across frequencies ranging from DC to 18 GHz.
HMC941ALP4E
Analog Devices' HMC941ALP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 6.5 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
HMC467LP3E
HMC467LP3E by Analog Devices is a RF/Microwave Attenuator with 6 dB Nominal Attenuation, 1.2 dB Max Insertion Loss, and 30 dBm Max Input Power (CW). It operates in the frequency range of 0-6000 MHz and has a characteristic impedance of 50 ohm. This variable attenuator is suitable for applications requiring precise signal attenuation in RF and microwave circuits.
3014-120
Aeroflex/weinschel
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz;
HMC472ALP4ETR
Analog Devices' HMC472ALP4ETR is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 1.22 Max VSWR, and 28 dBm Max Input Power. It operates from -40 to 85°C, has a GaAs technology, and covers frequencies from 0-3800 MHz. Ideal for variable attenuation in RF/microwave systems using surface mount technology.
24-3-63
FIXED ATTENUATOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 3 dB; Maximum Input Power (CW): 50 dBm; JESD-609 Code: e4;
47-10-42
IXYS Corporation
IXYS Corporation's 47-10-42 is a COAXIAL fixed attenuator with 10 dB nominal attenuation, handling up to 46.99 dBm CW power and supporting frequencies from 0 to 18000 MHz. It has a VSWR of 1.35, ideal for RF/Microwave applications in temperatures ranging from -55 to 125°C.
5413
FIXED ATTENUATOR; Terminal Finish: Nickel (Ni); Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 43.01 dBm; Construction: MODULE;
HMC653
The Analog Devices HMC653 is a RF/Microwave Attenuator with 3 dB nominal attenuation and 26.02 dBm max input power (CW). It operates in the frequency range of 0-50 GHz, making it ideal for high-frequency applications. Constructed with GaAs technology, it offers reliable performance in temperatures ranging from -55°C to 85°C.
HMC658LP2TR
Analog Devices' HMC658LP2TR is a RF fixed attenuator with 6 terminals, plastic/epoxy package. It operates b/w -40 °C to 85°C, suitable for surface mount applications in RF/microwave circuits.
ATN3590-04
Skyworks Solutions
ATN3590-04 by Skyworks Solutions is a fixed attenuator with 4 dB nominal attenuation and 33.01 dBm max input power. Operating from -55°C to 150°C, it covers frequencies from 0 MHz to 40 GHz. Ideal for RF/microwave applications requiring precise signal control in a compact component design.
LCAT1002-04
Infinite Electronics International
FIXED ATTENUATOR;
GAT-10
The Mini-circuits GAT-10 is a 10 dB fixed attenuator with max input power of 26.99 dBm and VSWR of 1.3, ideal for RF/Microwave applications. Constructed with plastic/epoxy body material, it operates from -45°C to 85°C within the frequency range of 0-8000 MHz.
1-30
FIXED ATTENUATOR; Construction: COAXIAL; Characteristic Impedance: 50 ohm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 12400 MHz; Maximum Operating Temperature: 125 Cel;
3010-3
Cobham Plc
The Cobham Plc 3010-3 is a RF/Microwave Attenuator with max input power of 30 dBm, VSWR of 1.35, and nominal attenuation of 3 dB. It's a variable attenuator with construction in coaxial format, operating from -40 to 65°C suitable for frequencies b/w 0-2500 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATS-1M1F-03DB2W
Amphenol
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Characteristic Impedance: 50 ohm; Additional Features: N-F; N-M; Maximum Operating Frequency: 6000 MHz;
ATS-1M1F-06DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Construction: COAXIAL; Nominal Attenuation: 6 dB; Maximum Operating Temperature: 125 Cel;
ATS-1M1F-15DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Additional Features: N-F; N-M; Maximum Operating Frequency: 6000 MHz; Nominal Attenuation: 15 dB;
ATS-1M1F-20DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Construction: COAXIAL;
ATS-1M1F-30DB2W
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-STD-202, MIL-STD-348A; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 6000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved