Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
3014-120 by Cobham Plc is a RF/Microwave Attenuator with max input power of 30 dBm, VSWR of 1.3, and attenuation of 110 dB. Ideal for variable attenuation in RF/microwave systems, it operates from -40 to 65°C with frequency range of 0-1250 MHz.
Median Price
$14.170
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$14.595
Electro Sonic
$14.600
VNN
Vyrian
AZTECH Wire
$10.969
Continental Prestige Electronics
$14.303
Netroflash
Argo Parts USA
Allows for high power handling capability, making it suitable for a wide range of applications where high power signals are present.
Provides excellent impedance matching and ensures minimal signal reflections, resulting in efficient signal transmission.
Offers a high level of attenuation, allowing for precise control over signal levels in RF or microwave systems.
Modular construction allows for easy integration into existing systems and flexibility in configuring the attenuator setup.
Can operate reliably in high-temperature environments, making it suitable for a variety of industrial and outdoor applications.
Withstands low temperatures, ensuring reliable performance even in harsh environmental conditions.
Low insertion loss ensures minimal signal degradation when passing through the attenuator, maintaining signal quality.
Variable attenuation capability allows for dynamic adjustment of signal levels, making it versatile in various testing and measurement scenarios.
Matches common RF systems impedance for seamless integration and compatibility with existing setups.
Supports a wide frequency range, suitable for applications requiring attenuation across different frequency bands.
Wide operating frequency range allows for use in a broad spectrum of RF and microwave applications, from low to high-frequency signals.
RF/Microwave Attenuators 3014-120 attributes and parameters. Explore more RF/Microwave Attenuators devices from Cobham Plc
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
The Cobham Group comprises a number of dynamic businesses in diverse specialist areas, each of which are experts in their field. Together we are a leading global technology and services innovator, highly regarded and respected for providing solutions to the most complex problems in some of the most challenging environments and missions. From the depths of the ocean to deep space and everywhere in between, our customers mission is our mission and every mission matters. Engineers critical, cutting edge data solutions for the most challenging missions on land, sea, and in air and space; with customised solutions across the entire signal chain, including RF, microwave and high reliability microelectronics.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
World Products
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Hy Electronic
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Vishay Semiconductors
66-10-13
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
XRA10AA1SES
Ttm Technologies
FIXED ATTENUATOR;
G40
Wj Communications
VARIABLE ATTENUATOR; Construction: MODULE; Minimum Operating Temperature: -54 Cel; Maximum Voltage Standing Wave Ratio: 2.3; Minimum Operating Frequency: 500 MHz; Maximum Insertion Loss: 4 dB;
45-3-44
Cobham Plc
45-3-44 by Cobham Plc is a fixed attenuator with 3 dB nominal attenuation, handling up to 56.99 dBm CW power and supporting VSWR of 1.1. Ideal for RF applications, it operates b/w -55°C to 125°C, covering frequencies from 0 MHz to 1500 MHz with a characteristic impedance of 50 ohms.
4102-22
4102-22 by Cobham Plc is a fixed attenuator with 2 dB nominal attenuation, 40 dBm CW input power, and 1.35 max VSWR. Constructed coaxially with gold terminal finish, it operates b/w -55°C to 125°C. Ideal for RF applications from 0 MHz to 18 GHz due to its 50 ohm impedance.
5404
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Additional Features: I/P POWER-MAX(PEAK)=200W; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 150 Cel; Minimum Operating Frequency: 0 MHz;
75-10-11
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Operating Frequency: 40000 MHz; Construction: MODULE; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz;
HMC467LP3E
Analog Devices
HMC467LP3E by Analog Devices is a RF/Microwave Attenuator with 6 dB Nominal Attenuation, 1.2 dB Max Insertion Loss, and 30 dBm Max Input Power (CW). It operates in the frequency range of 0-6000 MHz and has a characteristic impedance of 50 ohm. This variable attenuator is suitable for applications requiring precise signal attenuation in RF and microwave circuits.
HMC656LP2E
Hittite Microwave
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
SKY12239-11
Skyworks Solutions
VARIABLE ATTENUATOR;
HMC603MS10
Analog Devices' HMC603MS10 is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 3.1 dB Max Insertion Loss, and 30 dBm Max Input Power (CW). Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz.
MAAVSS0006TR-3000
M/a-com Technology Solutions
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Voltage Standing Wave Ratio: 3;
75-10-11 by Cobham Plc is a fixed attenuator with 10 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0 to 40 GHz. Ideal for RF/microwave applications, it boasts a low VSWR of 1.35 and operates in temperatures ranging from -55°C to 125°C.
84-8
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e4; Maximum Operating Frequency: 40000 MHz; Maximum Voltage Standing Wave Ratio: 1.5;
LCAT1002-07
Infinite Electronics International
66-10-14
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.9;
32-10
Cobham Plc's 32-10 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.35, and nominal attenuation of 10 dB. It is a coaxial fixed attenuator with a characteristic impedance of 50 ohm, operating frequency range from 0 MHz to 18000 MHz, and can withstand temperatures from -55°C to 125°C.
M1-3
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Additional Features: N-M, I/P POWER-MAX(PEAK)=1000W; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Construction: COAXIAL;
1-1
1-1 by Cobham Plc is a fixed attenuator with 1 dB nominal attenuation, 40 dBm CW input power, and 1.25 max VSWR. Constructed coaxially, it operates b/w -55°C to 125°C and covers frequencies from 0 MHz to 12400 MHz. Ideal for RF applications requiring precise signal control.
HMC939
Analog Devices' HMC939 is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 7.5 dB Max Insertion Loss, and 24.91 dBm Max Input Power (CW). It operates b/w -55 to 85°C, has a GAAS Technology, and supports frequencies from 100 MHz to 40 GHz. Ideal for variable attenuation in RF/microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3014-120
VARIABLE ATTENUATOR; Nominal Attenuation: 110 dB; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 1250 MHz; Minimum Operating Temperature: -40 Cel; Construction: MODULE;
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz;
3014-108
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Input Power (CW): 30 dBm; Minimum Operating Temperature: -40 Cel;
3014-11
VARIABLE ATTENUATOR; Maximum Operating Frequency: 1250 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 11 dB; Additional Features: SMA-F, HIGH RELIABILITY;
3014-19
VARIABLE ATTENUATOR; Maximum Operating Temperature: 65 Cel; Nominal Attenuation: 19 dB; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm;
3014-1
VARIABLE ATTENUATOR; Maximum Operating Frequency: 1250 MHz; Minimum Operating Frequency: 0 MHz; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Operating Temperature: 65 Cel; Characteristic Impedance: 50 ohm;
3014-101
VARIABLE ATTENUATOR; Nominal Attenuation: 101 dB; Construction: COAXIAL; Maximum Operating Frequency: 1250 MHz; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Voltage Standing Wave Ratio: 1.3;
3014-103
VARIABLE ATTENUATOR; Construction: COAXIAL; Nominal Attenuation: 103 dB; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Operating Frequency: 1250 MHz; Maximum Input Power (CW): 30 dBm;
3014-105
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 65 Cel;
VARIABLE ATTENUATOR; Construction: COAXIAL; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 30 dBm; Maximum Voltage Standing Wave Ratio: 1.3;
3014-14
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 1250 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm;
3014-15
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz; Nominal Attenuation: 15 dB;
3014-16
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 65 Cel; Nominal Attenuation: 16 dB; Characteristic Impedance: 50 ohm; Construction: COAXIAL;
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 30 dBm; Maximum Voltage Standing Wave Ratio: 1.3;
3014-100
VARIABLE ATTENUATOR; Nominal Attenuation: 100 dB; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 1250 MHz; Construction: COAXIAL; Characteristic Impedance: 50 ohm;
3014-102
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1250 MHz; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 65 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 1250 MHz; Additional Features: SMA-F, HIGH RELIABILITY; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 11 dB; Maximum Voltage Standing Wave Ratio: 1.3;
3014-12
VARIABLE ATTENUATOR; Maximum Operating Frequency: 1250 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL; Maximum Operating Temperature: 65 Cel; Minimum Operating Frequency: 0 MHz;
3014-17
VARIABLE ATTENUATOR; Maximum Input Power (CW): 30 dBm; Additional Features: SMA-F, HIGH RELIABILITY; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -40 Cel;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 1250 MHz; Maximum Operating Temperature: 65 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved