Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC346LP3ETR is a GAAS technology RF attenuator with 27 dB attenuation, 18.06 dBm CW input power, and 3.3 dB insertion loss. Ideal for variable attenuation in RF/microwave applications from 0 to 14000 MHz, it features a surface mount package with matte tin terminals.
Median Price
$23.800
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$28.560
100+ parts
-
1k+ parts
$19.040
10k+ parts
$16.320
Verical
Digiode
$18.022
Vyrian
J2 Sourcing AB
Parana Technologies
$1.147
$1.066
IDEA Electronic Components Group
$1.233
$1.171
DigiPath Technology Company
$1.923
$1.847
Semicontronic
$8.320
$8.112
$8.070
Corphita
$17.073
Component Stockers USA
$31.800
$21.210
$18.180
Metaverse IC Inc.
Perfect Parts
Futuretech Components
Plastic/Epoxy material provides durability and protection for the internal components of the attenuator, ensuring a longer lifespan.
The high maximum input power allows for reliable performance even in high-power applications.
The high level of attenuation ensures effective signal reduction while maintaining signal integrity.
Component construction indicates a high level of precision and reliability in the design of the attenuator.
The presence of 16 terminals allows for versatile connectivity options, making it suitable for a variety of setups.
The wide operating temperature range ensures that the attenuator can perform consistently in various environmental conditions.
The low minimum operating temperature further enhances the versatility of the attenuator, allowing it to be used in colder environments.
Matte Tin finish on the terminals provides good conductivity and resistance to corrosion, ensuring reliable signal transmission.
Low insertion loss indicates minimal signal degradation, maintaining signal quality during attenuation.
The GaAs technology used in this attenuator offers high-frequency capabilities and stable performance for RF and microwave applications.
Being a variable attenuator allows for adjustable levels of attenuation, providing flexibility in signal control.
The 50 ohm characteristic impedance matches common RF systems, ensuring compatibility and efficient signal transfer.
The ability to operate at 0 MHz allows for use in a wide range of frequency applications, from DC to microwave frequencies.
Surface mount installation simplifies the integration of the attenuator into circuit boards, saving space and facilitating assembly.
The high maximum operating frequency makes this attenuator suitable for a wide range of RF and microwave applications.
RF/Microwave Attenuators HMC346LP3ETR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC346LP3ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sensitron Semiconductor
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
TS0503W3F
Smiths Group Plc
TS0503W3F by Smiths Group Plc is a RF/Microwave Attenuator with 3dB attenuation, 33.01 dBm max input power, and 1.5 max VSWR. Ideal for fixed attenuator applications in the frequency range of 0-12400 MHz, this component has a characteristic impedance of 50 ohms and operates b/w -55 to 150°C.
LCAT1002-04
Infinite Electronics International
FIXED ATTENUATOR;
HMC629LP4E
Analog Devices
Analog Devices' HMC629LP4E is a GAAS technology RF attenuator with 45 dB attenuation, 5 dB insertion loss, and 27.99 dBm max input power. Ideal for variable attenuation in RF/microwave applications up to 6 GHz, featuring a surface mount package with 24 terminals and operating temperatures from -40°C to +85°C.
HMC653LP2E
Analog Devices' HMC653LP2E is a RF/Microwave Attenuator with 3dB Nominal Attenuation, 26.02 dBm Max Input Power (CW), and operates from 0 to 25000 MHz. It is a fixed attenuator suitable for applications requiring precise signal attenuation in the frequency range of DC to 25 GHz.
EXB24AT2AR3X
Panasonic
Panasonic's EXB24AT2AR3X is a 2 dB fixed attenuator with max input power of 16.02 dBm and VSWR of 1.3. Ideal for RF/Microwave applications, it operates from -55 to 125°C within the frequency range of 0-3000 MHz.
3007-2
Cobham Plc
3007-2 by Cobham Plc is a COAXIAL VARIABLE ATTENUATOR with 2 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates b/w -40 to 65 °C, suitable for RF/Microwave applications up to 2500 MHz frequency range.
G40
M/a-com
RF/Microwave Attenuators; No. of Terminals: 4; Package Body Material: METAL; Minimum Operating Temperature: -54 Cel; Package Equivalence Code: CAN4,.3; Maximum Operating Temperature: 85 Cel;
32-7
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm; Construction: COAXIAL; JESD-609 Code: e4; Minimum Operating Frequency: 0 MHz;
PE43705A-Z
Psemi
PE43705A-Z by Psemi is a RF/Microwave Attenuator with 31.75 dB Nominal Attenuation, 28 dBm Max Input Power (CW), and 3.2 dB Max Insertion Loss. It operates b/w -40 to 105 °C, has a CMOS Technology, and is ideal for applications requiring variable attenuation in the frequency range of 50 MHz to 8 GHz.
17-3
17-3 by Cobham Plc is a RF/Microwave Attenuator with 3 dB Nominal Attenuation, 36.99 dBm Max Input Power (CW), and 1.2 Max VSWR. It is a FIXED ATTENUATOR module suitable for applications requiring precise signal attenuation in the frequency range of 0-18000 MHz.
HMC230MS8ETR
Analog Devices' HMC230MS8ETR is a RF/Microwave Attenuator with 28 dB Nominal Attenuation, 26 dBm Max Input Power (CW), and 1.38 Max VSWR. This variable attenuator operates b/w 750 MHz to 2000 MHz, ideal for applications requiring precise signal attenuation in RF systems.
MTVA0200N09F
The Smiths Group Plc MTVA0200N09F is a RF/Microwave fixed attenuator with 2 dB nominal attenuation, 23.01 dBm CW input power, and 1.3 max VSWR. It operates from -55°C to 150°C, covering frequencies from 0 MHz to 12400 MHz. Ideal for applications requiring precise signal attenuation in high-frequency environments.
32-10
FIXED ATTENUATOR; Terminal Finish: Gold (Au); JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Maximum Voltage Standing Wave Ratio: 1.35; Minimum Operating Temperature: -55 Cel;
44-8
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Temperature: -50 Cel; Maximum Input Power (CW): 36.99 dBm; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Nominal Attenuation: 8 dB;
17-2
The Cobham Plc 17-2 is a fixed attenuator with 2 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0-18000 MHz. This RF/Microwave device has a VSWR of 1.2, operates b/w -50°C to +85°C, and features a gold terminal finish for high-quality connections in various applications.
44-9
Api Technologies
FIXED ATTENUATOR; Minimum Operating Temperature: -50 Cel; Nominal Attenuation: 9 dB; Terminal Finish: GOLD; Maximum Input Power (CW): 36.99 dBm; JESD-609 Code: e4;
47-10-34
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Terminal Finish: Gold (Au); Construction: COAXIAL; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.35;
46-1-34
Cobham Plc's 46-1-34 is a RF/Microwave Attenuator with 1 dB Nominal Attenuation, 43.98 dBm Max Input Power (CW), and 1.3 Max VSWR. Constructed with COAXIAL design, it operates b/w -55 to 125 °C and supports frequencies from 0 to 18000 MHz. Ideal for PANEL MOUNT applications requiring fixed attenuation at a characteristic impedance of 50 ohm.
44-2
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 85 Cel; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Input Power (CW): 36.99 dBm; Nominal Attenuation: 2 dB;
17-5
FIXED ATTENUATOR; Terminal Finish: GOLD; Construction: MODULE; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
HMC306MS10ETR
Hittite Microwave
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Nominal Attenuation: 15.5 dB; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
VARIABLE ATTENUATOR; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 15.5 dB;
HMC306AMS10E
Analog Devices' HMC306AMS10E is a GAAS technology RF attenuator with 15.5 dB attenuation, 2.7 dB insertion loss, and 26.99 dBm CW input power handling. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz, such as RF and microwave systems.
HMC306MS10
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 700 MHz;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 15.5 dB;
HMC306MS10E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC306MS10TR
VARIABLE ATTENUATOR; Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 700 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: 2.7 dB; Terminal Finish: Tin/Lead (Sn/Pb);
VARIABLE ATTENUATOR; Maximum Insertion Loss: 2.7 dB; Construction: COMPONENT; Maximum Input Power (CW): 28.06 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC346AMS8GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC346AMS8GETR
VARIABLE ATTENUATOR; Nominal Attenuation: 28 dB; Maximum Operating Frequency: 8000 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 17.78 dBm; Maximum Insertion Loss: 3.1 dB;
HMC307QS16G
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC307QS16GE
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC307QS16GERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): -5;
HMC307QS16GETR
HMC305ALP4E
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Maximum Insertion Loss: 2.5 dB; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
HMC305SLP4E
VARIABLE ATTENUATOR; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Minimum Operating Frequency: 400 MHz; Maximum Operating Frequency: 7000 MHz;
HMC307QS16GRTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SSOP16,.25;
HMC305ALP4
VARIABLE ATTENUATOR; Maximum Operating Frequency: 3800 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 26.02 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved