Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARIABLE ATTENUATOR; Maximum Operating Temperature: 65 Cel; Nominal Attenuation: 2 dB; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
Median Price
$11.665
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$11.330
100+ parts
-
1k+ parts
10k+ parts
Element14
$13.115
RS Americas
$13.450
$10.360
Newark
$14.000
RS (Exports)
$14.970
Standard Electric Supply Co.
$12.000
Master Electronics
$0.136
Verical
$0.170
Arrow
$0.092
Chip1Stop
$0.098
Carlton-Bates
$0.130
Galco
$10.050
Nova Conductors
VNN
IBS Electronics
$0.185
$0.173
Vyrian
Powertech Controls
Elcom Components
Electronic Expediters
Bastille Electronics
$9.548
$8.944
Continental Prestige Electronics
$9.849
Argo Parts USA
RF/Microwave Attenuators 3007-2 attributes and parameters. Explore more RF/Microwave Attenuators devices from Api Technologies
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
For more than 70 years our company has led the way in developing reliable, high-performance technologies for powering and conditioning RF and microwave signals and protecting electronic equipment from electromagnetic interference. We continue to push out the limits of the possible today, innovating in material science, design engineering, and manufacturing technologies. We are a company that is transforming in profound ways. Our recent name change to Spectrum Control from APITech is a very public way of embracing these changes. Headquartered in Fairview, PA, USA, Spectrum Control provides rugged, reliable and efficient components, subsystems, and custom solutions. Our multiple locations listed below include engineering centers, manufacturing facilities, and support offices in the United States, Canada, Mexico, the United Kingdom, and Germany. We also have sales and support teams located regionally around the world.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM358DT
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2-5
Cobham Plc
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Nominal Attenuation: 5 dB; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz;
59-3-32
Aeroflex/weinschel
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-C-39012; MIL-DTL-3933; Terminal Finish: Gold (Au); Maximum Operating Temperature: 100 Cel; Nominal Attenuation: 3 dB;
RFSA2013TR7AE
Qorvo
Qorvo's RFSA2013TR7AE is a CMOS RF attenuator with 16 terminals, operating from -40°C to 85°C. It has a power supply of 5V and surface-mounting feature. Ideal for RF/microwave applications requiring precise signal attenuation in plastic/epoxy packages.
HRF-AT4521-TR
Honeywell
HRF-AT4521-TR by Honeywell is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 3.4 dB Max Insertion Loss, and 2500 MHz Max Operating Frequency. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in CMOS technology.
HMC468LP3ETR
Analog Devices
Analog Devices' HMC468LP3ETR is a RF/Microwave Attenuator with 30 dBm CW input power, 7 dB attenuation, and 1.8 dB insertion loss. Ideal for variable attenuation in applications spanning from 0-6000 MHz, this component operates b/w -40 to 85 °C with a characteristic impedance of 50 ohms.
3007-4
3007-4 by Cobham Plc is a COAXIAL RF/Microwave Attenuator with 4 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.3 Max VSWR. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-2500 MHz. Operating temperatures range from -40°C to 65°C.
47-40-34
FIXED ATTENUATOR; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel; Terminal Finish: Gold (Au); Maximum Voltage Standing Wave Ratio: 1.35; Characteristic Impedance: 50 ohm;
HMC305ALP4
Analog Devices' HMC305ALP4 is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 2.5 dB Max Insertion Loss, and 26.02 dBm Max Input Power (CW). It operates b/w 700 MHz to 3800 MHz, making it ideal for signal attenuation in various RF/microwave applications.
HMC307QS16GERTR
Analog Devices' HMC307QS16GERTR is a RF/Microwave Attenuator with 16 terminals, operating from -40°C to 85°C. Utilizing GaAs technology, it has a max supply current of 6mA at -5V. Ideal for applications requiring surface mount packaging in plastic/epoxy material.
HMC307QS16GE
Analog Devices' HMC307QS16GE is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 2.7 dB Max Insertion Loss, and -40 to 85°C Operating Temperature range. It's a VARIABLE ATTENUATOR suitable for applications requiring precise signal control in the frequency range of 0-4000 MHz.
8491A-020
Keysight Technologies
The Keysight Technologies 8491A-020 is a fixed attenuator with 20 dB nominal attenuation, 33.01 dBm CW input power, and 1.3 max VSWR. Ideal for RF applications up to 12400 MHz, it features a coaxial construction and panel mount for easy installation in various systems.
HMC792ALP4ETR
HMC792ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 15.75 dB Nominal Attenuation, 28.98 dBm Max Input Power (CW), and 4 dB Max Insertion Loss. It is a VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-6000 MHz.
HMC629LP4TR
Analog Devices' HMC629LP4TR is a GaAs technology RF attenuator with 24 terminals, operating from -40 °C to 85°C. It has a power supply of 5V and comes in a surface-mount package. Ideal for RF/microwave applications requiring variable attenuation control.
G40
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Maximum Input Power (CW): 23.01 dBm; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 4000 MHz; Maximum Voltage Standing Wave Ratio: 2.3; Nominal Attenuation: 22 dB;
R412420124
Radiall S A
The Radiall S A R412420124 is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3. Ideal for RF applications, it operates from -55°C to 125°C, covering frequencies from 0 MHz to 3000 MHz. Constructed coaxially with gold finish, it offers reliable signal attenuation in various systems.
68-2-44
The Cobham Plc 68-2-44 is a RF/Microwave Attenuator with a max input power of 50 dBm and a max VSWR of 1.2. It has a nominal attenuation of 2 dB and operates in temperatures ranging from -55 to 100 °C. This fixed attenuator is ideal for applications requiring precise signal control in the frequency range of 0 to 4000 MHz.
HMC939ALP4ETR
HMC939ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 8 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a GAAS Technology, and supports frequencies from 100 MHz to 33 GHz. Ideal for variable attenuation in RF/microwave applications.
45-3-44
FIXED ATTENUATOR; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Additional Features: N-M, I/P POWER-MAX(PEAK)=10000W; Maximum Input Power (CW): 56.99 dBm;
HMC654LP2ETR
Analog Devices' HMC654LP2ETR is a fixed attenuator with 6 terminals, operating from -40 °C to 85°C. Made of plastic/epoxy, it's ideal for RF/microwave applications requiring surface mount installation.
82-40-22
FIXED ATTENUATOR; Maximum Input Power (CW): 60 dBm; Construction: COAXIAL; Nominal Attenuation: 40 dB; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3007-2
VARIABLE ATTENUATOR; Maximum Operating Temperature: 65 Cel; Minimum Operating Frequency: 0 MHz; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 2500 MHz;
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 2500 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL;
VARIABLE ATTENUATOR; Nominal Attenuation: 4 dB; Construction: COAXIAL; Maximum Input Power (CW): 30 dBm; Additional Features: SMA-F, HIGH RELIABILITY; Characteristic Impedance: 50 ohm;
Api Technologies
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 4 dB; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 30 dBm; Characteristic Impedance: 50 ohm;
3007-103
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 2500 MHz; Maximum Operating Temperature: 65 Cel; Construction: MODULE; Maximum Input Power (CW): 30 dBm;
3007-123
VARIABLE ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Frequency: 0 MHz; Maximum Insertion Loss: .3 dB; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 65 Cel;
3007-10
VARIABLE ATTENUATOR; Construction: COAXIAL; Additional Features: SMA-F, HIGH RELIABILITY; Nominal Attenuation: 10 dB; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
3007-1
VARIABLE ATTENUATOR; Nominal Attenuation: 1 dB; Construction: COAXIAL; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz; Maximum Operating Temperature: 65 Cel;
3007-3
VARIABLE ATTENUATOR; Construction: COAXIAL; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Operating Temperature: 65 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Temperature: -40 Cel;
3007-5
The Aeroflex/weinschel 3007-5 is a COAXIAL VARIABLE ATTENUATOR with 5 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.3 Max VSWR. Ideal for RF/Microwave applications, it operates from -40°C to 65°C within the frequency range of 0-2500 MHz.
3007-6
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Input Power (CW): 30 dBm; Minimum Operating Frequency: 0 MHz;
3007-9
VARIABLE ATTENUATOR; Construction: COAXIAL; Maximum Operating Frequency: 2500 MHz; Nominal Attenuation: 9 dB; Additional Features: SMA-F, HIGH RELIABILITY; Minimum Operating Temperature: -40 Cel;
3007-100
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 2500 MHz; Nominal Attenuation: 10 dB; Maximum Input Power (CW): 30 dBm; Additional Features: SMA-F, HIGH RELIABILITY, I/P POWER-MAX(PEAK)=100W;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 2500 MHz; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 0 MHz; Construction: MODULE; Maximum Operating Temperature: 65 Cel;
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 3 dB; Maximum Input Power (CW): 30 dBm;
3007-7
VARIABLE ATTENUATOR; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 2500 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 30 dBm;
3007-0
VARIABLE ATTENUATOR; Additional Features: SMA-F, HIGH RELIABILITY; Maximum Operating Frequency: 2500 MHz; Nominal Attenuation: 0 dB; Maximum Operating Temperature: 65 Cel; Maximum Voltage Standing Wave Ratio: 1.3;
VARIABLE ATTENUATOR; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 30 dBm; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL;
VARIABLE ATTENUATOR; Nominal Attenuation: 5 dB; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 65 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved