Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARIABLE ATTENUATOR; Construction: COAXIAL; Maximum Operating Frequency: 2500 MHz; Nominal Attenuation: 9 dB; Additional Features: SMA-F, HIGH RELIABILITY; Minimum Operating Temperature: -40 Cel;
Median Price
$28.830
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Master Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
TME
$1.970
RF/Microwave Attenuators 3007-9 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Rugao Dachang Electronic
32-8.5
Api Technologies
FIXED ATTENUATOR; Maximum Input Power (CW): 33.01 dBm; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm;
M3933/25-36S
Cobham Plc
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 18000 MHz; Additional Features: SMA;
32-8
Cobham Plc's 32-8 is a RF/Microwave Attenuator with max input power of 33.01 dBm, VSWR of 1.35, and nominal attenuation of 8 dB. It is a coaxial fixed attenuator with a characteristic impedance of 50 ohm, operating frequency range from 0 MHz to 18000 MHz, and can withstand temperatures from -55°C to 125°C.
66-10-44
The Cobham Plc 66-10-44 is a fixed attenuator with 10 dB nominal attenuation, handling up to 51.76 dBm CW power and supporting frequencies from 0 to 18000 MHz. Constructed coaxially with a VSWR of 1.9, it's ideal for RF/microwave applications requiring precise signal control in temperatures ranging from -55°C to 100°C.
41
Aeroflex/weinschel
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 40 dBm;
HMC629LP4ETR
Analog Devices
Analog Devices' HMC629LP4ETR is a GaAs RF attenuator with 24 terminals, operating from -40 °C to 85°C. It has a 5V power supply, suitable for surface mount applications in RF/microwave circuits requiring variable attenuation control.
M2-10
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Input Power (CW): 36.99 dBm; Maximum Operating Frequency: 18000 MHz; Additional Features: N-M, I/P POWER-MAX(PEAK)=1000W; JESD-609 Code: e4;
3010-3
VARIABLE ATTENUATOR; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 65 Cel; Minimum Operating Frequency: 0 MHz; Construction: COAXIAL;
779-7
Lockheed Martin Microwave
Lockheed Martin Microwave's 779-7 is a fixed attenuator module with max input power of 33.01 dBm and VSWR of 1.4, operating from 0-18000 MHz. Ideal for RF applications requiring precise signal attenuation in high-power environments.
2-10
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.35; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm;
47-10-21
IXYS Corporation
IXYS Corporation's 47-10-21 is a COAXIAL RF attenuator with 10 dB attenuation, handling up to 46.99 dBm CW power and VSWR of 1.35. Ideal for applications requiring fixed attenuation in the frequency range of 0-18000 MHz, such as RF/Microwave systems.
RFSA2013TR7
Qorvo
The Qorvo RFSA2013TR7 is a CMOS variable attenuator with 30 dB nominal attenuation and 3.5 dB max insertion loss. It operates from 50 MHz to 6 GHz, suitable for RF/microwave applications requiring precise signal control in a compact surface-mount package. With a max input power of 30 dBm, it offers high performance across temperatures ranging from -40°C to 105°C.
66-10-32
Cobham Plc's 66-10-32 is a RF/Microwave Attenuator with 10 dB Nominal Attenuation, 51.76 dBm Max Input Power (CW), and 1.9 Max VSWR. Ideal for applications requiring fixed attenuation in the frequency range of 0-18000 MHz, featuring gold terminal finish and panel mount construction. Operating temperatures from -55 to 100°C make it versatile for various environments.
44-1
FIXED ATTENUATOR; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Minimum Operating Frequency: 0 MHz; JESD-609 Code: e4; Terminal Finish: GOLD; Maximum Operating Frequency: 18000 MHz;
HMC291
Analog Devices' HMC291 is a RF/Microwave Attenuator with 12 dB Nominal Attenuation, 1.6 dB Max Insertion Loss, and 28.06 dBm CW Input Power. It operates from -40 to 85°C, suitable for applications requiring variable attenuation in the frequency range of 700 MHz to 4 GHz using GAAS technology.
59-3-41
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Screening Level: MIL-C-39012; MIL-DTL-3933; Additional Features: SMK-F; N-M, I/P POWER-MAX(PEAK)=10000W; MIL-STD-348; Minimum Operating Temperature: -55 Cel; Terminal Finish: Gold (Au);
MAATCC0005-TB
Tyco Electronics M/a-com
VARIABLE ATTENUATOR; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 31.5 dB; JESD-609 Code: e3; Maximum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 33.98 dBm;
90-30-33
90-30-33 by Cobham Plc is a RF/Microwave Attenuator with 30 dB Nominal Attenuation, 46.99 dBm Max Input Power (CW), and 1.3 Max VSWR. Ideal for applications requiring fixed attenuation in the frequency range of 0-18000 MHz, featuring gold terminal finish and coaxial construction.
HMC656LP2E
Hittite Microwave
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
HMC624ACPSZ-EP-PT
Analog Devices' HMC624ACPSZ-EP-PT is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 25 dBm Max Input Power, and 3.8 dB Max Insertion Loss. It operates from 100 MHz to 6000 MHz, making it ideal for variable attenuation in RF/microwave systems requiring precise power control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved