Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
THS3092DDA
Texas Instruments
THS3092DDA by Texas Instruments is a dual operational amplifier with 145 MHz bandwidth and 78 dB CMRR. It operates at -40 to 85°C, ideal for industrial applications requiring high-speed signal processing in a compact package. With low bias current of 15 uA and wideband capability, it suits precision measurement systems.
Operational Amplifier
Current Feedback
2
Operational Amplifiers
No
Yes
145 MHz
78 dB
68 dB
3000 uV
5700 V/us
15 uA
20 uA
15 V
16.5 V
-15 V
-16.5 V
-40 °C (-40 °F)
85 °C (185 °F)
260 °C (500 °F)
30 s
21 mA
0.193 in (4.9 mm)
0.154 in (3.9 mm)
0.067 in (1.7 mm)
8
0.05 in (1.27 mm)
Dual
Gull Wing
Matte Tin
Plastic/Epoxy
1
Industrial
R-PDSO-G8
e3
Tube
HLSOP
Rectangular
Small Outline, Heat Sink/Slug, Low Profile
THS3092DR
THS3092DR by Texas Instruments is a dual operational amplifier with 8 terminals in a small outline package. It features industrial temperature grade, Gull Wing terminal form, and 1.27 mm pitch. Ideal for applications requiring precise signal amplification in compact electronic devices.
0.069 in (1.75 mm)
SOP
Small Outline
THS3092D
THS3092D by Texas Instruments is a dual operational amplifier with 145 MHz bandwidth and 78 dB CMRR. It operates at -40 to 85°C, has 15 uA IIB, and supports frequency compensation. Ideal for industrial applications requiring high-speed signal processing in a compact package.
0.193 in (4.905 mm)
0.153 in (3.895 mm)
Nickel Palladium Gold
e4
THS3096DR
THS3096DR by Texas Instruments is a dual operational amplifier in a small outline package. With 14 terminals, it has a width of 3.9mm and length of 8.65mm, suitable for industrial temperature grade applications. The amplifier type is operational with gull wing terminal form, making it ideal for surface mount designs.
0.341 in (8.65 mm)
14
R-PDSO-G14
THS3096PWP
THS3096PWP by Texas Instruments is a dual operational amplifier with 145 MHz bandwidth and 78 dB CMRR. Ideal for industrial applications, it operates from -40 to 85 °C with low bias current of 15 uA, making it suitable for precision signal processing in various electronic systems.
0.197 in (5 mm)
0.173 in (4.4 mm)
0.047 in (1.2 mm)
0.026 in (0.65 mm)
HTSSOP
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch
TLV2772AQPWRQ1
TLV2772AQPWRQ1 by Texas Instruments is a CMOS Operational Amplifier with 1900uV Max Input Offset Voltage, 82dB Nominal CMRR, and 4.7V/us Min Slew Rate. Ideal for automotive applications due to AEC-Q100 screening level and low-bias design.
Voltage Feedback
CMOS
3/5 V
4.8 MHz
82 dB
1900 uV
13000
4.7 V/us
6 V/us
350 pA
60 pA
2.7 V
7 V
125 °C (257 °F)
4 mA
0.118 in (3 mm)
Automotive
AEC-Q100
Tape And Reel
TSSOP
Small Outline, Thin Profile, Shrink Pitch
TSSOP8,.25
TLV2772QDRQ1
TLV2772QDRQ1 by Texas Instruments is a CMOS Operational Amplifier with 2 functions, featuring low bias current of 0.00006 uA @25C and high common mode rejection ratio of 82 dB. Ideal for automotive applications due to AEC-Q100 screening level, it operates at temperatures ranging from -40 to 125 °C.
2.7/5 V
2700 uV
SOP8,.25
AD8672AR-REEL
Analog Devices
AD8672AR-REEL by Analog Devices is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-5/+-15V, has a unity gain bandwidth of 10MHz, and offers a nominal slow rate of 4V/us. Ideal for automotive applications due to its temperature grade and compact small outline package style.
BIPOLAR
±5/±15 V
10 MHz
120 dB
125 uV
1000000
4 V/us
40 nA
12 nA
5 V
18 V
-5 V
-18 V
240 °C (464 °F)
8.4 mA
Tin Lead
e0
OP727AR-REEL7
Analog Devices' OP727AR-REEL7 is a dual operational amplifier with low-offset voltage of 300 uV and micropower feature. Ideal for industrial applications, it offers high common mode rejection ratio of 120 dB and wide supply voltage range of +-1.5/+-15/3/30 V. With compact dimensions (4.9mm x 3.9mm), it's suitable for surface mount designs requiring precise signal amplification in harsh environments.
±1.5/±15/3/30 V
700 kHz
300 uV
300000
0.2 V/us
10 nA
900 μA
Tape And Reel, 7 Inch
ADA4062-2ARMZ-RL
ADA4062-2ARMZ-RL by Analog Devices is a micropower operational amplifier with low-bias current. It offers a max input offset voltage of 5000 uV and nominal unity gain bandwidth of 1400 kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage range of +-15 V.
±15 V
1.4 MHz
90 dB
5000 uV
3980
3.3 V/us
5 nA
50 pA
520 μA
0.043 in (1.1 mm)
S-PDSO-G8
Square
TSSOP8,.19
ADA4062-2ARZ-RL
ADA4062-2ARZ-RL by Analog Devices is a dual operational amplifier with 5000uV max input offset voltage and 90dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125 °C with micropower consumption of 0.52mA at +-15V supplies.
ADA4062-2BRZ-R7
ADA4062-2BRZ-R7 by Analog Devices is a dual operational amplifier with 3000uV max input offset voltage and 90dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125 °C with low bias current of 0.00005uA @25C. With micropower technology, it offers high performance in a small outline package.
ADA4062-2BRZ-RL
ADA4062-2BRZ-RL by Analog Devices is a dual operational amplifier with 3000uV max input offset voltage, 90dB CMRR, and 1400kHz unity gain bandwidth. Ideal for automotive applications due to its low-bias micropower technology and wide temperature range of -40 to 125 °C.
ADA4505-2ACBZ-RL
ADA4505-2ACBZ-RL by Analog Devices is a CMOS Op Amp with 4000uV Max Input Offset Voltage, 100dB CMRR, and 50kHz Unity Gain Bandwidth. Ideal for automotive applications due to low-bias current, micropower consumption, and wide operating temperature range of -40 to 125 °C.
±0.9/±2.5/1.8/5 V
50 kHz
100 dB
4000 uV
56200
6500 V/us
375 pA
2 pA
1.8 V
5.5 V
30 μA
0.056 in (1.42 mm)
0.02 in (0.5 mm)
Bottom
Ball
Tin Silver Copper
S-PBGA-B8
e1
VFBGA
Grid Array, Very Thin Profile, Fine Pitch
BGA8,3X3,20
TSM103WAID
STMicroelectronics
TSM103WAID by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 3000 µV and a nominal voltage of 5 V. It features an impressive common mode reject ratio of 85 dB, making it ideal for precision applications. With a compact SO package and industrial temperature grade, it's perfect for space-constrained environments.
±1.5/±16/3/32 V
900 kHz
85 dB
25000
0.4 V/us
200 nA
150 nA
36 V
0 V
105 °C (221 °F)
2 mA
3
AD8672ARM-R2
AD8672ARM-R2 by Analog Devices is a dual operational amplifier with low-offset voltage of 125uV and max bias current of 0.04uA. It operates at a supply voltage of +-5/+-15V, making it suitable for automotive applications requiring high precision and low power consumption. The op amp features a unity gain bandwidth of 10MHz, ideal for frequency compensation in compact designs.
LM2904WD
LM2904WD by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9 mV and a common mode reject ratio of 85 dB. It operates within -40 °C to 125 °C, making it ideal for automotive applications. With a nominal voltage of 5V, it's perfect for compact designs.
1.1 MHz
9000 uV
0.3 V/us
0.6 V/us
32 V
LM2904WHD
LM2904WHD by STMicroelectronics is a dual operational amplifier designed for automotive applications. It features a max input offset voltage of 9 mV, a nominal CMRR of 85 dB, and operates within -40 °C to 150 °C. Ideal for precision signal processing with low bias current.
±1.5/±13/3/26 V
2500
150 °C (302 °F)
LM2904WN
LM2904WN by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9 mV and a common mode reject ratio of 85 dB. It operates within -40 °C to 125 °C, making it ideal for automotive applications. With a nominal voltage of 5V, it ensures reliable performance in various circuits.
0.3 in (7.62 mm)
0.189 in (4.8 mm)
0.1 in (2.54 mm)
Through-Hole
R-PDIP-T8
DIP
In Line
DIP8,.3
TJM4558CD
TJM4558CD by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 6000 µV and a nominal voltage of ±15 V. It features a high common mode reject ratio of 70 dB, making it ideal for precision signal processing applications. With surface mount capability and low bias current, it's perfect for compact electronic designs.
5.5 MHz
70 dB
6000 uV
2.2 V/us
400 nA
22 V
-22 V
0 °C (32 °F)
70 °C (158 °F)
4.5 mA
Nickel/Palladium/Gold
Commercial
TJM4558CN
TJM4558CN by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 6000 µV and a nominal voltage of ±15 V. It features a high common mode reject ratio of 70 dB, making it ideal for precision signal processing applications. With a compact in-line package, it operates efficiently within -22 V to +22 V supply limits.
AD8056ARMZ-REEL
AD8056ARMZ-REEL by Analog Devices is an Operational Amplifier with 10000uV Max Input Offset Voltage, 1.2uA Max Average Bias Current, and 82dB Nominal CMRR. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
10000 uV
840 V/us
1.2 uA
13.2 V
AD8056ARZ
AD8056ARZ by Analog Devices is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 10000 uV and Nominal Common Mode Reject Ratio of 82 dB. Widely used in automotive applications due to its high performance at temperatures ranging from -40 to 125 °C.
40 s
AD8626ARM-R2
AD8626ARM-R2 by Analog Devices is an Operational Amplifier with 1350uV Max Input Offset Voltage, 105dB CMRR, and 1.8mA Max Supply Current. Ideal for industrial applications requiring low-bias amplification in a compact package with micropower capabilities. Package style: Small Outline, Thin Profile, Shrink Pitch.
±2.5/±13/5/26 V
5 MHz
105 dB
1350 uV
100000
5 V/us
1 pA
13 V
13.5 V
-13 V
-13.5 V
1.8 mA
AD8672AR-REEL7
AD8672AR-REEL7 by Analog Devices is a dual operational amplifier with low offset voltage of 125 uV and bias current of 0.04 uA. Suitable for automotive applications, it operates at temperatures ranging from -40 to 125 °C and has a unity gain bandwidth of 10 MHz. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
LM358NG
Onsemi
LM358NG by Onsemi is an operational amplifier with 2 functions, offering a max input offset voltage of 7000 uV and a nominal voltage of 5 V. Widely used in commercial applications, it features a min voltage gain of 15000 and operates within a temperature range of 0-70 °C.
1 MHz
65 dB
7000 uV
15000
50 nA
500 nA
250 nA
3 mA
0.365 in (9.27 mm)
0.21 in (5.33 mm)
Rail
MC33202DG
MC33202DG by Onsemi is a dual operational amplifier with 2 functions. It features a max input offset voltage of 11000 uV, bias current of 0.25 uA, and common mode reject ratio of 90 dB. Ideal for industrial applications requiring precise signal amplification in compact designs.
2.2 MHz
60 dB
11000 uV
0.5 V/us
1 V/us
100 nA
2.25 mA
Tin
TLV2252AQDREP
TLV2252AQDREP by Texas Instruments is a dual operational amplifier with 850uV max input offset voltage, 83dB CMRR, and 200kHz unity gain bandwidth. Ideal for automotive applications due to its low-bias current, micropower feature, and compact size in a small outline package.
200 kHz
83 dB
850 uV
10000
0.05 V/us
0.12 V/us
1 nA
3 V
16 V
125 μA
TLV2252QDREP
TLV2252QDREP by Texas Instruments is a dual operational amplifier with 1750uV max input offset voltage, 75dB CMRR, and 10000 min voltage gain. Ideal for automotive applications due to its low-bias, micropower technology, and VFB architecture. Package style: SOIC-8.
187 kHz
75 dB
1750 uV
0.1 V/us
150 μA
TLV2252QDRQ1
TLV2252QDRQ1 by Texas Instruments is a dual operational amplifier with 1500uV max input offset voltage, 83dB CMRR, and 200kHz unity gain bandwidth. Ideal for automotive applications due to AEC-Q100 screening and low-bias micropower technology.
1500 uV
MC33072PG
MC33072PG by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 97dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85 °C with a unity gain bandwidth of 4500 kHz. With a compact package style and low bias current, it suits various precision signal processing tasks.
4.5 MHz
97 dB
20000
8 V/us
10 V/us
700 nA
5.6 mA
0.385 in (9.78 mm)
0.175 in (4.45 mm)
MC33172DG
MC33172DG by Onsemi is a dual operational amplifier with 6500uV max input offset voltage and 1.6V/us min slew rate. Ideal for industrial applications, it operates at -40 to 85 °C with a supply voltage of +/-15V and offers micropower consumption at 0.6mA max supply current.
5/±15 V
1.8 MHz
6500 uV
1.6 V/us
2.1 V/us
600 μA
MC34072DG
MC34072DG by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 97dB nominal CMRR. Ideal for applications requiring high voltage gain, it operates at ±15V supplies, offers 4500kHz unity gain bandwidth, and has a compact small outline package.
OPA2735AID
OPA2735AID by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It operates at a max supply voltage of +-6V, has a nominal unity gain bandwidth of 1600 kHz, and offers micropower consumption. Ideal for industrial applications requiring precise signal amplification in compact designs.
Chooper Stab
±1.35/±6/2.7/12 V
1.6 MHz
130 dB
115 dB
5 uV
562000
1.5 V/us
300 pA
200 pA
6.6 V
-6.6 V
1.5 mA
LMV358IPWRQ1
LMV358IPWRQ1 by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV and a max average bias current of 0.5 uA. It is designed for industrial applications requiring micropower amplification in a small outline package, suitable for surface mount assembly. With features like frequency compensation and high common mode rejection ratio, it offers precise signal processing in harsh environments.
615 μA
LMV358QPWRQ1
LMV358QPWRQ1 by Texas Instruments is a dual operational amplifier with 9000uV max input offset voltage and 65dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125 °C with micropower consumption of 0.615mA. Its small outline package makes it suitable for space-constrained designs.
AD8052ARZ-REEL7
AD8052ARZ-REEL7 by Analog Devices is a dual operational amplifier with 27000 uV max input offset voltage and 3.5 uA max average bias current. Ideal for automotive applications, it offers a wideband frequency compensation of 110000 kHz and operates at temperatures ranging from -40 to 125 °C.
3/5/±5 V
110 MHz
88 dB
27000 uV
5000
90 V/us
170 V/us
3.5 uA
2.6 uA
6.3 V
-6.3 V
11 mA
AD8052ARZ
AD8052ARZ by Analog Devices is a dual operational amplifier with 27000 uV max input offset voltage and 3.5 uA max average bias current. It operates at a wide temperature range of -40 to 125 °C, making it suitable for automotive applications requiring high precision and low power consumption. With a unity gain bandwidth of 110000 kHz, this op amp is ideal for high-frequency signal processing in compact designs.
MAX4039EUB
Maxim Integrated
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
BICMOS
4 kHz
8000 uV
4470
4000 V/us
100 pA
10 pA
4 V
10.6 μA
10
S-PDSO-G10
TSSOP10,.19,20
MCP655-E/MF
Microchip Technology
MCP655-E/MF by Microchip Technology is a CMOS operational amplifier with a max input offset voltage of 200 uV and a nominal common mode reject ratio of 84 dB. It is commonly used in automotive applications due to its low-offset and low-bias characteristics.
50 MHz
84 dB
200 uV
25118
30 V/us
2.5 V
6.5 V
18 mA
0.039 in (1 mm)
No Lead
TS 16949
S-PDSO-N10
HVSON
Small Outline, Heat Sink/Slug, Very Thin Profile
SOLCC10,.12,20
AD8017ARZ-REEL
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
±2.5/±6/+5/+12 V
100 MHz
2600 uV
800 V/us
35 uA
-2.5 V
15.6 mA
AD8022ARZ-REEL
AD8022ARZ-REEL by Analog Devices is a dual operational amplifier with 6250uV max input offset voltage and 7.5uA max average bias current. Ideal for industrial applications, it offers a wideband of 10kHz and operates b/w -40 to 85°C temperature range. With VOLTAGE-FEEDBACK architecture, it has a compact package style suitable for surface mount designs.
±2.5/±12 V
98 dB
6250 uV
42 V/us
7.5 uA
5 uA
-13.2 V
12.2 mA
AD8062ARZ
AD8062ARZ by Analog Devices is a dual operational amplifier with 6000uV max input offset voltage, 8.5uA max average bias current, and 80dB nominal CMRR. Widely used in industrial applications due to its 3/5V power supplies, -40 to 85°C operating temperature range, and compact small outline package design.
80 dB
1400
95 V/us
280 V/us
8.5 uA
9 uA
8 V
19 mA
LMV822DGKR
LMV822DGKR by Texas Instruments is a dual operational amplifier with a max input offset voltage of 4000 uV and a min slew rate of 1.4 V/us. It is ideal for industrial applications requiring micropower consumption, such as sensor signal conditioning and battery-powered devices. The package style is small outline, thin profile, shrink pitch, making it suitable for space-constrained designs.
2.5/5 V
1.4 V/us
1.7 V/us
140 nA
TCA0372DM2ELG
TCA0372DM2ELG by Onsemi is a dual operational amplifier with 20000uV max input offset voltage, 90dB nominal CMRR, and 1.4V/us min slew rate. Ideal for automotive applications due to its -40 to 125 °C operating temp range and VFB architecture.
20000 uV
30000
20 V
-20 V
14 mA
0.402 in (10.2 mm)
0.208 in (5.275 mm)
0.081 in (2.05 mm)
16
R-PDSO-G16
SOP16,.3
TCA0372DP1G
TCA0372DP1G by Onsemi is an operational amplifier with 2 functions, featuring a max input offset voltage of 20000 uV and a nominal common mode reject ratio of 90 dB. With a package style of IN-LINE, it is ideal for automotive applications requiring high voltage gain and low bias current.
TCA0372DP2G
TCA0372DP2G by Onsemi is an operational amplifier with 2 functions, featuring a max input offset voltage of 20000 uV and a nominal common mode reject ratio of 90 dB. With a package style of IN-LINE, it is ideal for automotive applications requiring a voltage-feedback architecture and a unity gain bandwidth of 1400 kHz.
0.755 in (19.175 mm)
0.175 in (4.44 mm)
R-PDIP-T16
DIP16,.3
TLC2252AQPWRQ1
TLC2252AQPWRQ1 by Texas Instruments is a dual operational amplifier with 1000uV max input offset voltage, 88dB nominal CMRR, and 210kHz unity gain bandwidth. Ideal for automotive applications due to AEC-Q100 screening level and low-bias micropower technology. Package style: small outline, thin profile, shrink pitch.
±1.35/±8/2.7/16 V
210 kHz
1000 uV
-8 V
© 2023 All rights reserved
