Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 1760; Package Code: HBGA; Package Shape: SQUARE; Terminal Pitch: .92 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Digiode
One Stop Electronics
$5.000
Ampacity Inc.
$6.000
AZTECH Wire
$9.838
Corohmni
$15.728
Semicontronic
$33.000
$32.175
$32.010
MARBEL Systems
$54.912
$52.715
Texas Native Microelectronics
$63.117
$60.592
$58.699
Kenton Components
$75.740
$66.652
Microchip USA
$31,711.130
Authorized Procurement Solutions
Qasali Group International
$163.599
$149.966
Supply Digital
Corphita
Other Function uPs,uCs & Peripheral ICs XCVC1802-2MSIVSVD1760 attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Xilinx
JESD-30 Code:
Length:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
XCVC1802-2MSIVSVD1760 Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Xilinx, Inc. (XIlinx) in February 2022 acquired by AMD
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
EU2B-YS3203C
Idec
ROTARY SWITCH;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Nexperia
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Daco Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CY8C4248LQI-BL483
Infineon Technologies
CY8C4248LQI-BL483 by Infineon Technologies is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w -40 to 85 °C and supports supply voltage range of 1.71V to 5.5V, making it ideal for INDUSTRIAL applications requiring high performance in a compact SQUARE package style.
EFR32MG21A020F512IM32-B
Silicon Labs
EFR32MG21A020F512IM32-B by Silicon Labs is a 32-terminal, square-shaped chip carrier with a supply voltage range of 1.71V to 3.8V. Operating b/w -40°C to 125°C, it's an automotive-grade System on Chip (SoC) suitable for various IoT applications due to its CMOS technology and compact dimensions of 4mm x 4mm.
AM6234ATCGGAALW
Texas Instruments
AM6234ATCGGAALW by Texas Instruments is a SoC peripheral IC with CMOS technology. It operates b/w -40 to 105 °C and has a supply voltage range of 0.715V to 0.79V. With 425 terminals in a grid array package, it's ideal for applications requiring high-speed processing in compact spaces.
MIMX8MM1CVTKZAA
NXP Semiconductors
The NXP Semiconductors MIMX8MM1CVTKZAA is a low-profile, fine-pitch SoC with 486 terminals. Operating b/w -40 to 105°C, it has a supply voltage range of 0.9-1V and uses CMOS technology. Ideal for applications requiring high performance in compact spaces.
XUF216-512-TQ128-C20A
Xmos
XUF216-512-TQ128-C20A by Xmos is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w 0-70 °C and has a supply voltage range of 0.95-1.05 V. This IC is ideal for applications requiring high performance in a compact FLATPACK package.
DS2408S/TR
Dallas Semiconductor
Other uPs/uCs/Peripheral ICs;
SCANSTA112SM/NOPB
SCANSTA112SM/NOPB by Texas Instruments is a MICROPROCESSOR CIRCUIT with 100 terminals in a GRID ARRAY package. It operates at temperatures from -40 to 85 °C and has a supply voltage of 3.3 V, making it ideal for INDUSTRIAL applications requiring high performance and reliability.
OMAPL138EZWTD4E
OMAPL138EZWTD4E by Texas Instruments is a MICROPROCESSOR CIRCUIT with 32-bit External Data Bus Width and 50 MHz Max Clock Frequency. It operates in an INDUSTRIAL temperature grade range of -40 to 90 °C, suitable for applications requiring high-speed processing and connectivity via I2C, SPI, UART, and USB interfaces.
MTCH6102-I/MV
Microchip Technology
MTCH6102-I/MV by Microchip Technology is a CMOS microprocessor circuit with 28 terminals in a square chip carrier package. It operates b/w -40 to 85 °C, with supply voltage range of 1.8-3.6 V. Ideal for industrial applications requiring high temperature tolerance and low power consumption.
XCZU3CG-1SFVC784E
Xilinx
XCZU3CG-1SFVC784E by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w 0-100°C, with a supply voltage of 0.85V. With 784 terminals in a GRID ARRAY package, it's ideal for various uPs and uCs applications.
LS1021AXN7KQB
Freescale Semiconductor
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 525; Package Code: HBGA; Package Shape: SQUARE; Package Style (Meter): GRID ARRAY, HEAT SINK/SLUG;
XC7Z030-2FBG676I
The Xilinx XC7Z030-2FBG676I is a System on Chip with CMOS technology. It operates b/w -40 to 100°C, with supply voltage ranging from 0.95V to 1.05V. With 676 terminals in a grid array package, it's ideal for applications requiring high-performance processing in compact spaces.
NRF52805-CAAA-B-R7
Nordic Semiconductor Asa
NRF52805-CAAA-B-R7 by Nordic Semiconductor Asa is a 28-terminal SoC with CMOS technology. It operates b/w -40 to 85 °C, with supply voltage range of 1.7V to 3.6V. Ideal for applications requiring a compact GRID ARRAY package with very thin profile and fine pitch design.
MPFS250T-1FCVG484E
The Microchip Technology MPFS250T-1FCVG484E is a SoC peripheral IC with CMOS technology. It operates b/w 0°C to 100°C, with a supply voltage range of 0.97V to 1.03V. This grid array IC, measuring 19mm x 19mm, is ideal for applications requiring fine pitch and surface mount capabilities.
AM6411BSCGHAALV
AM6411BSCGHAALV by Texas Instruments is a System on Chip with 441 terminals in a grid array package. It operates b/w -40 to 105°C, with supply voltage ranging from 0.715V to 0.79V. Ideal for applications requiring high-performance computing in compact spaces.
XC7Z015-L1CLG485I
XC7Z015-L1CLG485I by Xilinx is a System on Chip with CMOS technology. It operates b/w -40 to 100°C, with supply voltage ranging from 0.95V to 1.05V. This package style features a grid array, low profile design ideal for various applications in the electronics industry.
A2F200M3F-CSG288I
Microchip A2F200M3F-CSG288I is a 288-terminal SoC FPGA with CMOS technology. It operates b/w -40 to 100 °C, with supply voltage range of 1.425-1.575 V. Ideal for applications requiring thin profile and fine pitch grid array packages.
MCIMX6Q6AVT10AER
MCIMX6Q6AVT10AER by NXP Semiconductors is a 624-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 1.35V to 1.5V and peak reflow temp of 260C, it's ideal for various uP/uC functions in surface-mount designs.
MIMX8MQ5DVAJZAB
SoC; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
ATWINC1510-MR210PB1961
ATWINC1510-MR210PB1961 by Microchip operates at 3-4.2V, with a temp range of -40 to 85°C. It is a CMOS microprocessor circuit with 28 terminals, ideal for industrial applications requiring surface mount technology in a compact rectangular package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XCVC1902-2MLEVSVD1760
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 1760; Package Code: HBGA; Package Shape: SQUARE; Minimum Supply Voltage: .775 V;
XCVC1902-2MSIVSVA2197
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 2197; Package Code: HBGA; Package Shape: SQUARE; Package Style (Meter): GRID ARRAY, HEAT SINK/SLUG;
XCVC1902-1LLIVSVA2197
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 2197; Package Code: HBGA; Package Shape: SQUARE; Technology: CMOS;
XCVC1902-1MSEVSVA2197
MICROPROCESSOR CIRCUIT; Terminal Form: BALL; No. of Terminals: 2197; Package Code: HBGA; Package Shape: SQUARE; JESD-30 Code: S-PBGA-B2197;
XCVC1352-1GLEVBVA1024
MICROPROCESSOR CIRCUIT;
XCVC1352-1HLEVBVA1024
XCVC1352-1HLIVBVA1024
XCVC1352-1HLIVSVE1369
XCVC1352-1DLEVSVE1369
XCVC1352-1DSEVBVA1024
XCVC1352-1GLIVBVA1024
XCVC1352-1GSIVSVE1369
XCVC1352-1DSIVSVE1369
XCVC1352-1HLEVSVE1369
XCVC1352-1DLIVSVE1369
XCVC1352-1GLIVSVE1369
XCVC1352-1DSEVSVE1369
XCVC1352-1GSEVBVA1024
XCVC1352-1GSEVSVE1369
XCVC1352-1GLEVSVE1369
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved