Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM3423MH/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for LED display driver applications. This small outline package has 16 terminals and is surface-mountable, with a terminal pitch of 0.65mm.
Median Price
$3.066
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.994
100+ parts
$2.623
1k+ parts
$1.482
10k+ parts
-
DigiKey
$4.240
$2.727
$2.454
$2.317
Mouser Electronics
$4.760
$2.940
$2.770
$2.620
Rochester
$2.130
$1.900
$1.790
Verical
$2.375
$2.237
RS (Exports)
$3.138
Digiode
$1.396
Nova Conductors
$1.761
TME
$4.010
$2.730
Vyrian
Anansix
Prism Electronics
Ampacity Inc.
$1.250
Semicontronic
$1.219
$1.212
Corphita
$1.323
Advanced Electronics
$1.755
$1.667
Argo Parts USA
Continental Prestige Electronics
$1.726
Netroflash
Parana Technologies
$5.767
$6.562
DigiPath Technology Company
$6.350
ChromeModa Solutions
$6.480
$5.314
IDEA Electronic Components Group
$5.832
Corohmni
$12.258
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Authorized Procurement Solutions
Perfect Parts
The plastic/epoxy material used in the package body provides durability and protection to the internal components of the graphics display driver, ensuring a longer lifespan.
Being surface mountable allows for easy and efficient installation of the graphics display driver onto a circuit board, saving time during manufacturing processes.
With a high maximum supply voltage of 75V, this graphics display driver can handle robust power requirements, making it suitable for a wide range of applications.
The rectangular package shape provides a compact design, allowing for efficient use of space on the circuit board and aiding in overall system optimization.
Having 16 terminals provides ample connectivity options for interfacing with other components, giving flexibility in design and compatibility with different systems.
The low minimum supply voltage of 4.5V ensures compatibility with a wide range of power sources, making this graphics display driver versatile for various applications.
With a high maximum operating temperature of 125°C, this graphics display driver can withstand elevated temperatures, ensuring reliable performance in demanding environments.
The constant-current output characteristics provide stable and consistent power output to the display, ensuring accurate and uniform brightness levels for an enhanced visual experience.
The low minimum operating temperature of -40°C allows this graphics display driver to function effectively in cold environments, making it suitable for a variety of applications.
The matte tin terminal finish offers corrosion resistance and good solderability, ensuring reliable electrical connections and long-term performance of the graphics display driver.
The compact width of 4.4mm allows for space-efficient installation on the circuit board, enabling a streamlined design and ease of integration in various electronic devices.
The moderate length of 6.5mm provides a balance between compactness and functionality, allowing for a versatile integration of the graphics display driver in different system designs.
The automotive temperature grade ensures that this graphics display driver can withstand harsh temperature conditions typically encountered in automotive applications, making it a reliable choice for automotive displays.
The gull wing terminal form offers secure mechanical support and ease of soldering, ensuring strong connections and reliable performance of the graphics display driver in various operating conditions.
Designed specifically for LED display drivers, this interface IC type ensures optimized performance and compatibility with LED display technology, making it an ideal choice for driving LED-based visual displays.
Graphics Display Drivers LM3423MH/NOPB attributes and parameters. Explore more Graphics Display Drivers devices from Texas Instruments
Additional Features:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Channels:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM3423MH/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nexperia
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Diotec Semiconductor Ag
Surge Components
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LT3496EUFD#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;
STLED524
STLED524 by STMicroelectronics is a graphics display driver with dot matrix mode, serial data input, and 120 segments. It operates b/w -30 to 85 °C with supply voltage range of 2.7-5.5 V. Ideal for LED displays in various applications due to its thin profile and fine pitch package style.
PCA9552BS,118
PCA9552BS,118 by NXP Semiconductors is a serial graphics display driver with 24 terminals. Operating at 2.3V to 5.5V, it supports LED displays with 16 segments and a max frequency of 0.4MHz. Ideal for industrial applications requiring precise temperature control and compact design in a square chip carrier package style.
BCR420UFD-7
BCR420UFD-7 by Diodes Inc. is a LED display driver with 6 terminals, small outline package style, and nickel palladium gold finish. It has a peak reflow temp of 260°C and dual terminal position. Ideal for graphics display applications requiring a compact design and surface mount capability.
PCF85134HL/1,118
PCF85134HL/1,118 by NXP Semiconductors is a graphics display driver with dot matrix and segment display modes. It operates at a voltage range of 1.8V to 5.5V, making it suitable for industrial applications. With 7-digit characters and 60 segments, this CMOS technology-based driver offers multiplexed display capability for liquid crystal displays.
AL8807MP-13
AL8807MP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 6-30V, and temp grade for automotive applications. It comes in a small outline package with matte tin finish, suitable for graphics displays requiring high temperature tolerance up to 125°C.
TPS92515HVQDGQTQ1
TPS92515HVQDGQTQ1 by Texas Instruments is a LED display driver with a max supply voltage of 65V and min supply voltage of 5.5V. It operates in automotive temperature grades (-40 to 125°C) making it suitable for automotive lighting applications. The package style is small outline, heat sink/slug, thin profile, shrink pitch with gull wing terminal form.
ICM7224IPL+
Maxim Integrated
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
LT3744IUHE#PBF
Analog Devices
LT3744IUHE#PBF by Analog Devices is a Graphics Display Driver IC with 36 terminals, operating voltage range of 3.3V to 36V, and temperature grade suitable for automotive applications. This chip carrier package has a very thin profile, matte tin finish, and quad terminal position ideal for LED display driver interfaces in automotive electronics.
LP5018RSMR
LP5018RSMR by Texas Instruments is a graphics display driver with 18 channels and 24 segments. It operates b/w -40 to 125 °C, with a supply voltage range of 2.7V to 5.5V. Ideal for automotive applications, it features a serial data input mode and terminal finish of Ni/Pd/Au/Ag.
TPS92512DGQT
TPS92512DGQT by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 4.5V to 42V, and temperature grade suitable for automotive applications. It features a small outline package style with heat sink, dual terminal position, and nickel palladium gold silver finish. Ideal for graphics display drivers requiring high performance in compact spaces.
LED2000PUR
LED DISPLAY DRIVER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
MAX6954AAX+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
TLC59116FIRHBR
TLC59116FIRHBR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates in industrial temperature range (-40 to 85 °C) and has a max supply voltage of 5.5 V. Ideal for LED display driver applications due to its compact chip carrier package style and nickel palladium gold terminal finish.
STCS2SPR
STCS2SPR by STMicroelectronics is a Graphics Display Driver with 10 terminals, operating voltage range of 4.5V to 40V, and BICMOS technology. It is ideal for LED display driver applications due to its small outline package style and industrial temperature grade suitability.
AL5809-90P1-7
Diodes Inc.'s AL5809-90P1-7 LED display driver has a max supply voltage of 60V, min supply voltage of 2.5V, and operates in automotive-grade temperature range (-40 to 125°C). It is a surface-mount package with dual terminals suitable for graphics displays applications.
TFP410PAP
TFP410PAP by Texas Instruments is a graphics display driver with 64 terminals, operating at 3.3V. It supports dot matrix display mode and serial/parallel data input. Ideal for LCD drivers, it has a max supply voltage of 3.6V and operates b/w 0-70°C temperature range.
LT3475EFE-1#PBF
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
MAX7219CWG+
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
SAA1064T/N2,112
NXP Semiconductors' SAA1064T/N2,112 is a 24-terminal LED display driver with serial data input mode and totem-pole output. It operates in industrial temperature range (-40 to 85 °C) with multiplexed display capability for 4-digit segments. Ideal for graphics displays, it supports a max supply voltage of 15 V and requires only 14 mA max supply current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
LM3409HVMY/NOPB
LM3409HVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409HVMYX/NOPB
LM3409HVMYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LM3414HVMRX/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LM3405AXMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409MY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
LM3409MY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures from -40 to 125°C, making it ideal for LED display driver applications. This small outline package has 10 terminals and is surface-mountable for compact designs.
LM3410XMF/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LM3409MYX/NOPB
LM3409MYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for space-constrained applications. Ideal for LED display driving, it features dual terminals and matte tin finish.
LM3404HVMAX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 6/75;
LM3414HVMR/NOPB
LM3414HVMR/NOPB by Texas Instruments is a graphics display driver with 24V power supply, 65V max supply voltage, and constant-current output. Ideal for automotive applications, it features a small outline package with dual terminals and serial data input mode.
LM3409QHVMY/NOPB
LM3409QHVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
LM3414MRX/NOPB
LM3414MRX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This LED display driver has a constant-current output and is designed for surface mount installation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved