Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
Median Price
$2.432
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$1.360
100+ parts
$0.945
1k+ parts
$0.735
10k+ parts
$0.642
Newark
$1.550
$1.050
$0.924
-
Texas Instruments
$1.935
$1.598
$0.864
DigiKey
$2.930
$1.802
$1.672
Mouser Electronics
$1.810
$1.590
$1.510
Element14
$1,929.000
$1,307.000
$1,150.000
Nova Conductors
$1.320
Digiode
$1.838
Chip Stock
Vyrian
Anansix
Prism Electronics
Continental Prestige Electronics
$1.294
Argo Parts USA
Netroflash
Modulus Dynamics
$1.465
$1.451
$1.407
Semicontronic
$1.640
$1.599
$1.591
Ampacity Inc.
Corphita
$1.742
Component Stockers USA
$2.490
$1.800
$0.920
Corohmni
$5.087
Parana Technologies
$5.433
$6.141
ChromeModa Solutions
$6.105
$5.006
IDEA Electronic Components Group
$5.494
Microchip USA
$8.225
Advanced Electronics
$13.109
$11.929
$10.749
Lixinc
Perfect Parts
GreenTree Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
DigiPath Technology Company
$5.504
Futuretech Components
S.R.D Solutions
Graphics Display Drivers LM3409QHVMY/NOPB attributes and parameters. Explore more Graphics Display Drivers devices from National Semiconductor
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
LM3409QHVMY/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
1552200168
Molex
WIRE AND CABLE;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
TLC5916IPW
TLC5916IPW by Texas Instruments is a graphics display driver with 16 terminals, operating at -40 to 125 °C. It features constant-current output, serial data input mode, and supports segment display mode. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
LM3554TMX/NOPB
LM3554TMX/NOPB by Texas Instruments is a graphics display driver with 2 channels, operating voltage range of 2.5V to 5.5V, and constant-current output. It features a serial data input mode, very thin profile grid array package style, and is suitable for LED display driver applications in various devices.
LT3756EUD-1#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
MBI6662GD-A
Macroblock
MBI6662GD-A by Macroblock is a LED display driver with 12V supply voltage. It has 10 terminals, GULL WING form, and operates in industrial temperature range (-40 to 85 °C). Ideal for graphics displays due to its small outline package style and surface mount capability.
BCR402RE6327HTSA1
Infineon Technologies
BCR402RE6327HTSA1 by Infineon Technologies is a small outline, thin profile LED display driver with 4 terminals and a max seated height of 1.1 mm. It operates at a nominal voltage of 10 V and is suitable for graphics display applications.
LM3915N-1/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LM3509SD/NOPB
LM3509SD/NOPB by Texas Instruments is a graphics display driver with 10 terminals, operating voltage range of 2.7V to 5.5V, and constant-current output. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for industrial applications requiring LED display drivers with multiplexed display capability.
LM3409QMY/NOPB
LM3409QMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It is designed for automotive applications, featuring a small outline package style and dual terminal position. With an operating temperature range from -40 to 125°C, it provides reliable LED display driving in various environments.
TPS92640PWP
TPS92640PWP by Texas Instruments is a graphics display driver with a max supply voltage of 85V. It has a small outline package style and is suitable for automotive applications.
TLC5926IPWPR
TLC5926IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and constant-current output. It is ideal for LED displays in automotive applications due to its small outline package and dual terminal position. The IC features serial data input mode, standard input characteristics, and a max supply current of 20mA.
STP16CP05TTR
STMicroelectronics
STP16CP05TTR by STMicroelectronics is a Graphics Display Driver with 16 segments, operating at 3-5.5V. It features serial data input mode, small outline package style, and automotive temperature grade. Ideal for LED display driver applications in automotive electronics due to its compact size and wide supply voltage range.
TLC5925IDWR
TLC5925IDWR by Texas Instruments is a graphics display driver with 16 segments, operating at 30 MHz. It features constant-current output and serial data input mode for LED displays. Ideal for automotive applications, it has a small outline package with dual terminals and supports supply voltages of 3-5.5V.
CAP1126-1-AP-TR
Standard Microsystems
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
MIC2841AYMT-TR
Microchip Technology
MIC2841AYMT-TR by Microchip is a Graphics Display Driver with 10 terminals, operating voltage range of 3V to 5.5V, and output polarity TRUE. Ideal for LED displays in automotive applications due to its small outline package, dual terminal position, and nickel palladium gold finish.
MIC2293-15YML-TR
Micrel
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
LT3475EFE-1#TRPBF
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
LT3474EFE-1#PBF
Analog Devices
LT3474EFE-1#PBF by Analog Devices is a graphics display driver with a supply voltage range of 4V to 36V. It features a small outline package style with 16 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for LED displays, this IC has a peak reflow temperature of 260°C and matte tin terminal finish.
LM3414SDX/NOPB
LM3414SDX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With constant-current output characteristics, this LED display driver has a small outline package style and dual terminal position.
PCA9624PW,118
NXP Semiconductors
PCA9624PW,118 by NXP Semiconductors is a Graphics Display Driver with 24 terminals. It operates b/w -40 to 85°C and supports a serial data input mode. Ideal for LED displays, it has a max supply voltage of 5.5V and small outline package style.
STLED524
STLED524 by STMicroelectronics is a graphics display driver with dot matrix mode, serial data input, and 120 segments. It operates b/w -30 to 85 °C with supply voltage range of 2.7-5.5 V. Ideal for LED displays in various applications due to its thin profile and fine pitch package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM3409HVMY/NOPB
LM3409HVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409HVMYX/NOPB
LM3409HVMYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LM3414HVMRX/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LM3405AXMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409MY/NOPB
LM3409MY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures from -40 to 125°C, making it ideal for LED display driver applications. This small outline package has 10 terminals and is surface-mountable for compact designs.
LM3410XMF/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LM3409MYX/NOPB
LM3409MYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for space-constrained applications. Ideal for LED display driving, it features dual terminals and matte tin finish.
LM3404HVMAX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 6/75;
LM3414HVMR/NOPB
LM3414HVMR/NOPB by Texas Instruments is a graphics display driver with 24V power supply, 65V max supply voltage, and constant-current output. Ideal for automotive applications, it features a small outline package with dual terminals and serial data input mode.
LM3409QHVMY/NOPB
LM3409QHVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
LM3414MRX/NOPB
LM3414MRX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This LED display driver has a constant-current output and is designed for surface mount installation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved