Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
Median Price
$1.381
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.799
100+ parts
-
1k+ parts
10k+ parts
Mobius Materials
$1.365
$1.094
Digiode
$1.396
Maritex
$4.005
$1.843
$1.397
Vyrian
Chip Stock
Component Sense
Anansix
Continental Prestige Electronics
$0.783
Argo Parts USA
Netroflash
$0.759
$0.743
Semicontronic
$1.250
$1.219
$1.212
Ampacity Inc.
Corphita
$1.323
Corohmni
$5.960
Parana Technologies
$7.345
$7.838
DigiPath Technology Company
$8.088
$7.441
ChromeModa Solutions
$8.253
$6.767
IDEA Electronic Components Group
$7.428
Advanced Electronics
$10.648
$10.116
GreenTree Electronics
iodParts Technologies Inc.
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
Futuretech Components
Authorized Procurement Solutions
Graphics Display Drivers LM3409MYX/NOPB attributes and parameters. Explore more Graphics Display Drivers devices from National Semiconductor
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
LM3409MYX/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Nexperia
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Panjit International
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
PCF8562TT/2,118
NXP Semiconductors
PCF8562TT/2,118 by NXP Semiconductors is a DOT MATRIX display driver with SERIAL data input mode. It operates at 1.8-5.5 V and has 16-DIGIT display capability. Ideal for industrial applications requiring multiplexed displays in a compact form factor.
STP08DP05XTTR
STP08DP05XTTR by STMicroelectronics is a Graphics Display Driver with 8 segments, operating voltage range of 3-5.5V, and serial data input mode. Ideal for automotive applications due to its small outline package style and dual terminal position for LED display driving in temperature range -40 to 125°C.
LM3409HVMY/NOPB
LM3409HVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
TLC59108IRGYR
TLC59108IRGYR by Texas Instruments is an LED display driver with 8 channels, operating voltage of 3-5.5V, and constant-current output. Ideal for graphics displays, it features a serial data input mode, industrial temperature grade, and quad terminal position.
TLC5922DAPR
TLC5922DAPR by Texas Instruments is a graphics display driver with 32 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features serial data input mode, segment display mode, and small outline package style. Ideal for LED display applications requiring high precision and low power consumption.
ICM7224IPL+
Maxim Integrated
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
ICL7107CM44Z
Renesas Electronics
ICL7107CM44Z by Renesas Electronics is a 3 1/2-digit LED display driver with 23 segments. Operating at 5V, it has a temp range of 0-70°C and MSL level of 3. Ideal for graphics displays, its quad-terminal form and flatpack style make it suitable for various applications.
TLC59116IRHBR
TLC59116IRHBR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED display applications due to its compact chip carrier package style and industrial temperature grade suitability.
MAX25611CATC/VY+T
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
TLC59401RHBR
TLC59401RHBR by Texas Instruments is a graphics display driver with 32 terminals, operating voltage range of 3-5.5V, and constant-current output. It features serial data input mode, industrial temperature grade, and LED display driver interface IC type. Ideal for applications requiring precise current control in compact spaces.
FAN5702UMP15X
FAN5702UMP15X by Onsemi is a SERIAL graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85°C. Ideal for LED display driver applications due to its compact square package style and low power consumption at 0.4 MHz frequency.
LM3414MR/NOPB
LM3414MR/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It features constant-current output characteristics, making it ideal for automotive applications requiring LED display drivers. With a small outline package style and low profile, this IC is suitable for compact designs in harsh environments.
MAX6958BAEE+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HSSOP; Package Shape: RECTANGULAR;
TPS92513DGQT
TPS92513DGQT by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 4.5V to 42V, and temperature grade suitable for automotive applications. It features a small outline package style, dual terminal position, and peak reflow temperature of 260°C. Ideal for graphics display drivers in automotive LED lighting systems.
MAX6964AEG+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX7219CNG+
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
LT3591EDDB#TRPBF
Analog Devices' LT3591EDDB#TRPBF is a LED display driver with 8 terminals, operating voltage range of 2.5V to 12V, and industrial temperature grade up to -40°C to 85°C. Ideal for graphics displays, it features a small outline package style with dual terminal position and matte tin finish for surface mount applications.
PCF8577CTD
PCF8577CTD by NXP Semiconductors is a Graphics Display Driver with DOT MATRIX display mode, SERIAL data input. It operates b/w -40 to 85 °C and supports multiplexed display. Ideal for industrial applications requiring a CMOS technology-based LIQUID CRYSTAL DISPLAY DRIVER interface IC.
TLC59116IPWRG4
TLC59116IPWRG4 by Texas Instruments is a LED display driver with 16 segments, operating voltage range of 3-5.5V, and serial data input mode. Ideal for industrial applications, it comes in a small outline package with 28 terminals and can withstand temperatures from -40 to 85°C.
TLC5916IPWR
TLC5916IPWR by Texas Instruments is a graphics display driver with serial data input mode and constant-current output. It operates b/w -40 to 125 °C, suitable for automotive applications. With a max supply voltage of 5.5 V and 22 mA supply current, it's ideal for LED display driving in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409HVMYX/NOPB
LM3409HVMYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LM3414HVMRX/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LM3405AXMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
LM3409MY/NOPB
LM3409MY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures from -40 to 125°C, making it ideal for LED display driver applications. This small outline package has 10 terminals and is surface-mountable for compact designs.
LM3410XMF/NOPB
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LM3409MYX/NOPB
LM3409MYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for space-constrained applications. Ideal for LED display driving, it features dual terminals and matte tin finish.
LM3404HVMAX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 6/75;
LM3414HVMR/NOPB
LM3414HVMR/NOPB by Texas Instruments is a graphics display driver with 24V power supply, 65V max supply voltage, and constant-current output. Ideal for automotive applications, it features a small outline package with dual terminals and serial data input mode.
LM3409QHVMY/NOPB
LM3409QHVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
LM3414MRX/NOPB
LM3414MRX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This LED display driver has a constant-current output and is designed for surface mount installation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved