Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FL7733AMX by Onsemi is a LED display driver with 15V nominal voltage. It features 8 terminals, matte tin finish, and gull wing terminal form. This small outline package is ideal for graphics display applications requiring a power supply of 15V.
Median Price
$0.685
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.306
100+ parts
-
1k+ parts
$0.218
10k+ parts
$0.217
Arrow
$0.776
$0.485
$0.426
$0.364
Mouser Electronics
$0.960
$0.575
$0.509
$0.465
DigiKey
$1.030
$0.591
$0.516
Flip Electronics (Authorized)
Verical
$0.594
$0.529
Rochester
$0.572
$0.475
$0.423
Element14
$53.940
$39.370
$38.390
Farnell
$0.409
Ozdisan Elektronik
$0.391
Nova Conductors
$0.537
Digiode
$0.737
Chip Stock
Cyclops Electronics Ltd
Vyrian
Flip Electronics
Bristol Electronics
LWI Electronics Inc
Corohmni
Semicontronic
$0.392
$0.382
$0.380
Ampacity Inc.
Netroflash
$0.526
Argo Parts USA
$0.521
Advanced Electronics
$0.618
$0.569
$0.533
Corphita
$0.698
Continental Prestige Electronics
$0.900
$0.627
$0.402
Component Stockers USA
$1.100
$0.530
$0.450
$0.360
Microchip USA
$3.238
Aztec Data Supply Inc.
$7.271
Infinite Electronics LLP (Excess)
Perfect Parts
RC Electronics
$0.540
$0.500
$0.480
GreenTree Electronics
Formix International (Excess)
Lixinc
Glotronic Ltd.
ChipstoGo Electronic ltd
A-Z Elektronik GmbH
Kulean Microsystems
SupplyDigital Components
Alle Elektronik GmbH
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
Supply Digital
UHIMA Technologies
Kepictronics
S.R.D Solutions
The use of plastic/epoxy as the package body material makes the product lightweight and durable, perfect for portable applications.
The surface mount compatibility allows for easy and convenient installation on circuit boards, saving space and time during assembly.
With a power supply of 15V, this product can support a variety of LED display applications while ensuring reliable performance.
The 8 terminals provide ample connectivity options for interfacing with other components in the system, allowing for flexibility in circuit design.
The small outline package style saves space on the circuit board, making it ideal for compact electronic devices.
The matte tin terminal finish ensures good solderability and electrical conductivity, enhancing the reliability of the product.
The short maximum time at peak reflow temperature of 30 seconds helps prevent overheating and damage during the assembly process.
The peak reflow temperature of 260°C ensures proper soldering and bonding of components, resulting in a robust and long-lasting connection.
The nominal supply voltage of 15V is suitable for a wide range of LED display applications, offering compatibility with various power sources.
The interface IC type of LED display driver is specifically designed for driving LED displays, ensuring efficient and accurate control of the display output.
Graphics Display Drivers FL7733AMX attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
FL7733AMX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Cheng-yi Electronic
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
AP3031KTR-G1
Bcd Semiconductor Manufacturing
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
HV9910BNG-G
HV9910BNG-G by Microchip Technology is a LED display driver with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 8-450 V and is suitable for automotive applications due to its TS 16949 screening level. The package style is small outline, making it compact for various graphics display driver needs.
LT3952AHFE#WPBF
Analog Devices
Analog Devices' LT3952AHFE#WPBF is a LED display driver with 16 segments, operating voltage range of 3-42V. AEC-Q100 qualified for automotive applications, it has a small outline package with 28 terminals and operates b/w -40 to 150°C.
STP16CPC26PTR
STMicroelectronics
STP16CPC26PTR by STMicroelectronics is a Graphics Display Driver with 16 segments, operating voltage range of 3-5.5V, and serial data input mode. Ideal for LED display driver applications in automotive industry due to its small outline package style and dual terminal position.
ZXLD1360ET5TA
Zetex Plc
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
MAX25611AATC/VY+T
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
MAX20090ATP/VY+T
Maxim Integrated
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260;
LT3763IFE#PBF
LT3763IFE#PBF by Analog Devices is a Graphics Display Driver with a max supply voltage of 60V, suitable for automotive applications. It operates b/w -40 to 125 °C and has a terminal pitch of 0.65mm. This LED display driver comes in a small outline package with 28 terminals and matte tin finish.
NSI50010YT1G
NSI50010YT1G by Onsemi is a small outline LED display driver with 2 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications requiring compact design and surface mount technology.
BCR401UE6327HTSA1
Infineon Technologies
BCR401UE6327HTSA1 by Infineon Technologies is a small outline LED display driver with 6 terminals. It operates at a nominal voltage of 10V and has a terminal pitch of 0.95mm. This graphics display driver is ideal for applications requiring compact design and surface mount technology.
BCR420UW6-7
Diodes Incorporated
BCR420UW6-7 by Diodes Inc. is a small outline LED display driver with 6 terminals and matte tin finish. It operates b/w -55°C to 150°C, has a peak reflow temp of 260°C, and measures 3mm in length. Ideal for graphics displays, this driver offers true output polarity and standard input characteristics.
MAX6964AEG
MAX6964AEG by Maxim Integrated is a Graphics Display Driver with 17 segments, BICMOS technology, and 0.4 MHz min fmax. It operates in automotive temperature grades and interfaces as an LED display driver using serial data input mode.
NSI45025AT1G
NSI45025AT1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals and measures 1.6mm in width, making it suitable for compact graphics display applications requiring precise control and efficient performance.
FAN5702UC30X
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE;
TPS92611QDGNRQ1
TPS92611QDGNRQ1 by Texas Instruments is an LED display driver with a supply voltage range of 4.5V to 40V, suitable for automotive applications. It features a small outline package with 8 terminals and operates in temperatures from -40°C to 125°C. The device is AEC-Q100 qualified and supports up to 3 segments for graphics display drivers.
LM3509SD/NOPB
LM3509SD/NOPB by Texas Instruments is a graphics display driver with 10 terminals, operating voltage range of 2.7V to 5.5V, and constant-current output. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for industrial applications requiring LED display drivers with multiplexed display capability.
CPC9909NE
IXYS Corporation
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
MM5450YV
MM5450YV by Microchip Technology is a 44-terminal LED display driver with serial data input mode and true output polarity. It operates in industrial temperature range (-40 to 85 °C) with max supply voltage of 11 V. Ideal for applications requiring segment display mode, such as automotive dashboards or industrial control panels.
TPS92641PWPT/NOPB
TPS92641PWPT/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 85V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With constant-current output characteristics, this LED display driver has a small outline package style ideal for compact designs.
TLC59711PWP
TLC59711PWP by Texas Instruments is a graphics display driver with 12 channels and segments. It operates in segment display mode with serial data input, supporting constant-current output. Ideal for LED displays, it has a wide supply voltage range of 4-17V and industrial temperature grade of -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FL7733AMX
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
FL7701MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FL7701M
FL7760AM6X
FL7760AM6X by Onsemi is a graphics display driver with 6 terminals, operating at -40 to 125 °C. It supports parallel data input mode, segment display mode, and has a max supply voltage of 5.5 V. Ideal for automotive applications requiring LED display drivers in compact spaces.
FL7730MY_F116
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
FL7732M_F116
FL7733MX
FL7734MX
FL7734MX by Onsemi is a graphics display driver with 16 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 20 V. This LED display driver is commonly used in automotive applications.
FL7760BM6X
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
FL77904MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
FL77905MX
FL77944MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSOP; Package Shape: RECTANGULAR;
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved