Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.946
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.627
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.782
$0.745
$0.733
Mouser Electronics
$1.560
$0.918
$0.822
$0.711
DigiKey
$0.802
Adafruit Industries
$6.953
$6.327
$5.701
Rochester
$0.912
$0.757
$0.675
Verical
$0.843
Flip Electronics (Authorized)
Digiode
$0.617
Nova Conductors
$0.761
TME
$1.280
$0.940
$0.870
Bristol Electronics
$2.250
DigiKey Marketplace
Vyrian
Chip Stock
Classic Components Corporation
Flip Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Microfarads
Component Stockers USA
$0.390
$0.720
$0.650
Semicontronic
$0.560
$0.546
$0.543
Ampacity Inc.
$0.570
Corphita
$0.584
Corohmni
$0.744
Continental Prestige Electronics
$0.746
Netroflash
$0.723
$0.708
Argo Parts USA
Microchip USA
$4.994
Aztec Data Supply Inc.
$6.083
Advanced Electronics
Perfect Parts
Lixinc
TANS Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Kulean Microsystems
GreenTree Electronics
Authorized Procurement Solutions
Supply Digital
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Futuretech Components
Kepictronics
Graphics Display Drivers FL7701MX attributes and parameters. Explore more Graphics Display Drivers devices from Fairchild Semiconductor
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FL7701MX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Logo 17/Aug/2017
PCN Assembly/Origin - Qualify 2nd supplier 13/Aug/2020
PCN Packaging - Mult Devices 24/Oct/2017 Mult MSL1 Pkg Rev 20/Dec/2018
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Diotec Semiconductor Ag
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
LT3797ELXE#PBF
Analog Devices
LT3797ELXE#PBF by Analog Devices is a LED display driver with 48 terminals, operating voltage range of 2.5V to 40V, and automotive temperature grade up to 125°C. It features a flatpack package style, matte tin terminal finish, and gull wing terminal form. Ideal for graphics displays in automotive applications due to its high supply voltage tolerance and wide operating temperature range.
LP5521YQX/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TLC5925IPWRG4
TLC5925IPWRG4 by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and small outline package style. Ideal for LED displays in automotive applications due to its wide temperature range (-40 to 125°C) and low supply current (13mA).
PLP5036RJVR
LED DISPLAY DRIVER;
FAN7711MX
FAN7711MX by Onsemi is a small outline graphics display driver with 8 terminals. It operates b/w -25 to 125°C, supporting a nominal voltage of 14V. Ideal for EL displays, it features nickel palladium gold terminal finish and Gull Wing form factor.
TLC5916ID
TLC5916ID by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 3-5.5 V, and constant-current output. It features serial data input mode for segment display applications in automotive industry, with small outline package style and Gull Wing terminal form for surface mount assembly.
BCR402WH6327XTSA1
Infineon Technologies
BCR402WH6327XTSA1 by Infineon Technologies is a LED display driver with 4 terminals, small outline package style, and 10V nominal voltage. It is used in graphics display drivers for applications requiring surface mount technology and thin profile packages.
TLC5971PWP
TLC5971PWP by Texas Instruments is a graphics display driver with 12 channels and segments. It operates in segment display mode with serial data input, supporting a supply voltage range of 6-17V. Ideal for industrial applications, it offers constant-current output and can withstand temperatures from -40 to 85°C.
TPS61195RUYR
TPS61195RUYR by Texas Instruments is a graphics display driver with 8 channels, 96 segments, and serial data input mode. It operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 4.5-21 V. Ideal for LED displays, it has a compact chip carrier package style suitable for surface mount applications.
LT3496IUFD#PBF
LT3496IUFD#PBF by Analog Devices is a LED display driver with 28 terminals, operating from -40 to 125 °C. It supports parallel data input mode, with a supply voltage range of 3-30 V. Ideal for automotive applications due to its compact chip carrier package and high reflow temperature capability.
PCF8576DT/2,118
NXP Semiconductors' PCF8576DT/2,118 is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, has 56 terminals, and supports multiplexed displays. Ideal for industrial applications requiring a compact design and low power consumption.
PCA9633DP2,118
NXP Semiconductors' PCA9633DP2,118 is a LED display driver with 10 terminals and serial data input mode. Operating voltage ranges from 2.3V to 5.5V, suitable for industrial applications. It features a small outline package style and can handle temperatures from -40°C to 85°C efficiently.
ICM7224IPL
Maxim Integrated
ICM7224IPL by Maxim Integrated is a 40-terminal graphics display driver with serial data input mode. It operates b/w -20 to 85 °C and supports liquid crystal displays with 29 segments. With a CMOS technology, it has a max supply voltage of 6 V and min of 3 V, making it suitable for various display applications.
LTC3219EUD#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
FAN5702UC30X
Fairchild Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE;
MIC2287CYD5-TR
Microchip Technology
MIC2287CYD5-TR by Microchip is a LED display driver with 3 segments, operating at 2.5V to 10V. It has a small outline package style, suitable for industrial applications with an operating temperature range of -40°C to 105°C. The driver features true output polarity and nickel palladium gold terminal finish for reliable performance in graphics displays.
HV9910CSG-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
CD4511BE
General Electric Solid State
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
PCA9532PW,118
PCA9532PW,118 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and has a supply voltage range of 2.3-5.5 V. This small outline IC is ideal for industrial applications requiring precise graphics display control.
LM3429MHX/NOPB
LM3429MHX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. It operates in automotive-grade temperatures (-40 to 125°C) and has 14 power supplies, making it ideal for LED display driver applications. This small outline package with gull wing terminals is surface-mountable and suitable for various display designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FL7733AMX
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
FL7701MX
FL7701M
FL7760AM6X
FL7760AM6X by Onsemi is a graphics display driver with 6 terminals, operating at -40 to 125 °C. It supports parallel data input mode, segment display mode, and has a max supply voltage of 5.5 V. Ideal for automotive applications requiring LED display drivers in compact spaces.
FL7730MY_F116
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
FL7732M_F116
FL7733MX
FL7734MX
FL7734MX by Onsemi is a graphics display driver with 16 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 20 V. This LED display driver is commonly used in automotive applications.
FL7760BM6X
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
FL77904MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
FL77905MX
FL77944MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HLSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved