Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LDC1000NHRT by Texas Instruments is a small outline, heat sink package with 16 terminals. It operates b/w -40 to 125°C and has a supply voltage range of 4.75V to 5.25V, making it suitable for automotive applications requiring precise analog circuit functions.
Median Price
$5.625
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Newark
1+ parts
$4.000
100+ parts
1k+ parts
-
10k+ parts
Element14
$14.350
$10.740
$8.150
Rochester
$5.000
$4.470
$4.210
Verical
$6.250
$5.588
$5.263
Digiode
$5.282
Vyrian
Chip Stock
Semicontronic
$4.730
$4.612
$4.588
Corphita
$5.004
Corohmni
$5.560
Parana Technologies
$9.348
$9.971
DigiPath Technology Company
$10.293
$9.470
IDEA Electronic Components Group
$10.503
$9.978
$9.453
ChromeModa Solutions
$8.612
AZTECH Wire
$14.290
Perfect Parts
Authorized Procurement Solutions
Kepictronics
This material provides good insulation properties and is lightweight, making the product suitable for various applications while also keeping it lightweight.
Enables easy and efficient assembly onto circuit boards, saving time and effort during the manufacturing process.
This standard voltage ensures compatibility with many electronic devices and systems, making it a versatile choice.
The high operating temperature range allows the product to function reliably even in demanding environments or applications.
The wide temperature range ensures the product can operate effectively in both hot and cold conditions, enhancing its usability.
This finish provides good conductivity and corrosion resistance, ensuring reliable electrical connections and long-term durability.
Compact width allows for space-saving installation and integration into tight spaces or small electronic devices.
Designed to meet automotive industry standards for temperature, durability, and performance, making it suitable for automotive applications.
The fine pitch allows for high-density mounting on circuit boards, maximizing space efficiency and enabling complex electronic designs.
The slightly higher maximum supply voltage tolerance adds an extra margin of safety and flexibility in voltage requirements for the product.
Other Function Semiconductors LDC1000NHRT attributes and parameters. Explore more Other Function Semiconductors devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LDC1000NHRT Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - LDC1000 28/Jan/2019
PCN Design/Specification - Datasheet Chg 01/Feb/2016 Select Devices Add Cu Alt Wire Base Metal 17/Dec/2015
PCN Assembly/Origin - Qualification Flourine Free ILD 15/Jul/2014
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BAV99WT1G
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
XTR305IRGWR
XTR305IRGWR by Texas Instruments is a 20V analog circuit chip carrier with 20 terminals. Operating from -55 to 125 °C, it's ideal for industrial applications requiring a very thin profile and surface mount capability. With a square package and terminal finish of nickel palladium gold, this IC has a max supply voltage of 40V.
D-500-0458-1-612-079
TE Connectivity
Other Semiconductors;
PAMC1336DWVR
PAMC1336DWVR by Texas Instruments is an 8-terminal analog circuit IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It features a small outline package style, dual terminal position, and operates b/w -40 to 125°C temperatures. Ideal for surface mount designs in various electronic systems.
AD694ARZ-REEL
Analog Devices
AD694ARZ-REEL by Analog Devices is a 16-terminal IC with a supply voltage range of 4.5V to 36V, operating b/w -40°C to 85°C. It features a small outline package style, matte tin terminal finish, and gull wing form suitable for industrial applications requiring analog circuit functions in surface-mount designs.
LT3092ITS8#TRPBF
Linear Technology
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMP8645MKE/NOPB
National Semiconductor
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ICM-20649
Invensense
ANALOG CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
LT4363IDE-2#PBF
LT4363IDE-2#PBF by Analog Devices is a 12V nominal voltage IC with 12 terminals in a small outline package. Operating from -40 to 85°C, it has a max supply voltage of 80V and matte tin terminal finish. Ideal for industrial applications requiring precise analog circuit control in compact spaces.
LTC4311IDC#TRPBF
ANALOG CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
LTC6992CS6-1#PBF
ANALOG CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT3092EST#TRPBF
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 3; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT3092MPST#PBF
ANALOG CIRCUIT; Temperature Grade: MILITARY; No. of Terminals: 3; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLE2426CD
TLE2426CD by Texas Instruments is a small outline IC with 8 terminals, operating at 0-70°C. It has a supply voltage range of 4-40V and max current of 0.25mA. Ideal for analog circuits, it's used in applications requiring stable power supplies and surface mount technology.
LTC6992CS6-2#TRPBF
LT3092EDD#PBF
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
FDC1004DSCR
FDC1004DSCR by Texas Instruments is a 10-terminal analog circuit IC with a nominal voltage of 3.3V and operating temperatures ranging from -40 to 125°C. This surface-mount device in a small outline package is ideal for automotive applications, offering 4 channels and a max supply voltage of 3.6V.
960
Jw Miller Magnetics
LSM303DTR
STMicroelectronics
LSM303DTR by STMicroelectronics is a 16-terminal IC with a supply voltage range of 2.16V to 3.6V, operating b/w -40°C to 85°C. Its package style is grid array with very thin profile and fine pitch, suitable for industrial applications requiring precise analog circuit functions in compact spaces.
ADXL362BCCZ-RL
ADXL362BCCZ-RL by Analog Devices is a 16-terminal IC with a supply voltage range of 1.6V to 3.5V, operating b/w -40°C to 85°C. It features a CMOS technology, gold terminal finish, and is ideal for industrial applications requiring precise motion sensing in compact designs.
LSM303CTR
LSM303CTR by STMicroelectronics is a 12-terminal IC with Vsup range of 1.9V to 3.6V, operating temp from -40°C to 85°C. It features a square package style, suitable for industrial applications requiring precise analog circuit functions in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LDC1101DRCT
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
LDC1101DRCR
LDC1101DRCR by Texas Instruments is a small outline, heat sink package with 10 terminals. It operates at a supply voltage range of 1.71V to 3.46V and has a max current of 2.7mA. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C and moisture sensitivity level of 2.
LDC1612DNTT
LDC1612DNTT by Texas Instruments is a 12-terminal analog circuit IC with a supply voltage range of 2.7V to 3.6V, suitable for automotive applications. It features a small outline package style with very thin profile and matte tin terminal finish, making it ideal for surface mount assembly in tight spaces. With dual terminal position and no-lead form, this sensor offers precise measurements at temperatures ranging from -40°C to 125°C.
LDC1612QDNTRQ1
LDC1612QDNTRQ1 by Texas Instruments is a small outline, heat sink package with 12 terminals. It operates b/w -40 to 125°C and has a supply voltage range of 2.7V to 3.6V, making it ideal for automotive applications requiring precise analog circuit functions.
LDC1314QRGHTQ1
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LDC1612QDNTTQ1
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
LDC1312DNTT
LDC1041NHRR
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LDC1312QDNTTQ1
LDC1314QRGHRQ1
LDC1000NHRJ
LDC1000QPWRQ1
ANALOG CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LDC1051NHRJ
LDC1312DNTR
LDC1041NHRJ
LDC1312QDNTRQ1
LDC1051NHRR
LDC1001EPWRQ1
LDC1001EPWRQ1 by Texas Instruments is a small outline, thin profile analog circuit with 16 terminals. It operates b/w -40 to 150°C and has a supply voltage range of 1.8V to 5.25V, making it suitable for automotive applications requiring precise sensing in harsh environments. The package material is plastic/epoxy with matte tin finish, ideal for surface mount assembly at a max reflow temperature of 260°C.
LDC1051NHRT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved