Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ISO1050DUB by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, Gull Wing terminal form, and nickel palladium gold finish. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Median Price
$5.330
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$4.418
100+ parts
$3.887
1k+ parts
$3.460
10k+ parts
-
Chip1Stop
$5.110
$3.510
$3.240
Mouser Electronics
$5.550
$4.310
$3.530
$3.380
RS (Exports)
$5.553
$4.905
DigiKey
$6.460
$4.180
$3.770
$3.667
Verical
$4.325
$3.385
Digiode
$1.036
Nova Conductors
$3.750
IBS Electronics
$6.482
$4.167
$3.734
$3.748
Sensible Micro Corp
Chip Stock
Vyrian
Cyclops Electronics Ltd
Bristol Electronics
Atlantic Semiconductor
Classic Components Corporation
SIE Connect GmbH - GreenChips
Greenchips
ComSIT Distribution GmbH
QIE Inc.
LWI Electronics Inc
Kallista Electronics Ltd
SPM Sales
Inventory MP
Dark Horse Electronics
NexGen Digital
Ampacity Inc.
$0.930
Semicontronic
$0.907
$0.902
Corphita
$0.981
Argo Parts USA
$3.411
Continental Prestige Electronics
$3.343
Netroflash
Corohmni
$10.389
Advanced Electronics
$11.475
$10.901
Parana Technologies
$13.400
$1,244.378
$12.060
DigiPath Technology Company
$14.755
$13.574
Modulus Dynamics
$15.001
ChromeModa Solutions
$15.056
$12.346
IDEA Electronic Components Group
$14.303
$13.550
Perfect Parts
Lixinc
Alle Elektronik GmbH
GreenTree Electronics
Robosynatics
Lucentia Tech
$12.768
$12.508
A-Z Elektronik GmbH
Allen Electronics Distributors
S.R.D Solutions
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
The use of plastic/epoxy material makes the network interface lightweight and durable.
Being surface mountable allows for easy and efficient installation on circuit boards.
Having 8 terminals provides ample connectivity options for various network configurations.
The high maximum operating temperature ensures the network interface can handle demanding environmental conditions.
The use of nickel palladium gold terminal finish ensures excellent conductivity and corrosion resistance.
The compact width allows for efficient use of space on a circuit board.
The 5V supply voltage is a common standard in many electronic systems, making integration easier.
Network Interfaces ISO1050DUB attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ISO1050DUB Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
6110-01-656-9013, 6110016569013
NIIN
016569013
PCN Obsolescence/ EOL - EOL 21/Jun/2023
PCN Design/Specification - ISO1050 30/Oct/2019
PCN Assembly/Origin - AMC1YYY/ISO105 15/May/2019
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
TCAN1044VDRBRQ1
TCAN1044VDRBRQ1 by Texas Instruments is an automotive-grade network interface IC with 8 Mbps data rate, AEC-Q100 screening, and 5 V supply voltage. It comes in a small outline package suitable for surface mount applications in automotive electronics. Operating temperature ranges from -40 to 125°C making it ideal for harsh environments.
TJA1050T/H/V,112
NXP Semiconductors
TJA1050T/H/V,112 by NXP Semiconductors is a network interface IC with 8 terminals and a supply voltage of 5V. It operates at temperatures ranging from -40 to 125°C and has a data rate of 1 Mbps. This IC is commonly used in automotive applications for interface circuits.
TJA1052IT/1
NXP Semiconductors' TJA1052IT/1 is a 16-terminal network interface IC with AEC-Q100 screening for automotive applications. It operates at 1 Mbps data rate, supports dual terminal position, and has a nominal voltage of 5V. The small outline package style measures 10.3mm x 7.5mm x 2.65mm and can withstand temperatures from -40°C to 125°C, making it ideal for automotive communication systems.
TCAN330GDCNT
TCAN330GDCNT by Texas Instruments is a network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package style, nickel palladium gold finish, and supports data rates up to 5 Mbps. Ideal for automotive applications requiring a 3.3V supply voltage and high-temperature tolerance.
ISO1042DWVR
ISO1042DWVR by Texas Instruments is a network interface IC with 8 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 5V. This IC is commonly used in automotive applications for interface circuits.
MCP2562FDT-E/SN
Microchip Technology
MCP2562FDT-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a max supply current of 70 mA. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 8 Mbps. This transceiver is commonly used in automotive applications for network interfaces.
KSZ8081RNACA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD233D
SN65HVD233D by Texas Instruments is an automotive-grade interface circuit with a data rate of 1 Mbps. It operates at temperatures ranging from -40 to 125°C and has a nominal voltage of 3.3V. This network interface IC comes in a small outline package, making it suitable for various automotive applications.
AT86RF212B-ZU
Atmel
SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
PCA82C251T/N3
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AR8031-AL1B-R
Qualcomm
Qualcomm's AR8031-AL1B-R is an Ethernet transceiver with 1000 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, 48 terminals, and requires 3.3V supply voltage. Ideal for industrial telecom applications due to its compact size and low power consumption of 113.7 mA.
TJA1145T/FDJ
NXP Semiconductors' TJA1145T/FDJ is a CAN transceiver with 1Mbps data rate, AEC-Q100 screening level, and 1.5mA max supply current. Ideal for automotive applications due to its small outline package and dual terminal position.
DP83848IVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
MCP251863T-H/SSVAO
CAN FD TRANSCEIVER;
TCAN1051HGVDRQ1
TCAN1051HGVDRQ1 by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -55 to 125°C, and data rate of 5 Mbps. It is designed for automotive applications requiring AEC-Q100 screening, featuring small outline package style and Gull Wing terminal form. With a supply voltage of 5V and max supply current of 180mA, it provides reliable interface circuitry in harsh environments.
DP83848QSQE/NOPB
DP83848QSQE/NOPB by Texas Instruments is an Ethernet transceiver with 100Mbps data rate, operating at 3.3V. It features a CMOS technology, AEC-Q100 screening level, and industrial temperature grade suitability. The chip carrier package has 40 terminals in a square shape for surface mount applications.
SN65HVD230QD
SN65HVD230QD by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at 3.3V nominal voltage and has a small outline package style. With dual terminals and low supply current of 0.017mA, it ensures reliable network interfaces in harsh environments.
KSZ8863FLLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8794CNXCC
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HQCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ISO1042BDWVR
ISO1042BDWVR by Texas Instruments is an 8-terminal network interface in a small outline package. With a temperature range of -40 to 125°C, it's ideal for automotive applications. Featuring nickel palladium gold terminal finish, it operates at a nominal voltage of 5V.
ISO1042BQDWVRQ1
The Texas Instruments ISO1042BQDWVRQ1 is an AEC-Q100 compliant network interface with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and nickel palladium gold finish. Ideal for automotive applications requiring a 1.8V supply voltage and interface circuit connectivity.
ISO1050DWR
ISO1050DWR by Texas Instruments is a 16-terminal network interface with a small outline package. It operates b/w -55 to 105°C, with a peak reflow temperature of 260°C. Ideal for telecom applications requiring an interface circuit at a nominal voltage of 5V.
ISO1042BDWR
ISO1042BDWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The terminal finish is nickel palladium gold, and it has a gull wing terminal form for easy installation.
ISO1042QDWVRQ1
ISO1042QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold finish, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
ISO1044BDR
ISO1044BDR by Texas Instruments is a Network Interface with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Features include 1.8V supply voltage, 70mA max supply current, and Gull Wing terminal form.
ISO1042DWR
ISO1042DWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, making it suitable for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
ISO1042BQDWRQ1
ISO1042BQDWRQ1 by Texas Instruments is a network interface IC with 16 terminals and a small outline package style. It operates in automotive temperature grades (-40 to 125°C) and has a nominal voltage of 1.8V. This IC is suitable for use in interface circuits for telecom applications.
ISO1050DW
ISO1050DW by Texas Instruments is a network interface IC with 16 terminals in a small outline package. It operates at temperatures ranging from -55 to 105 °C and has a nominal voltage of 5V. This interface circuit is commonly used in telecom applications.
ISO1042QDWRQ1
ISO1042QDWRQ1 by Texas Instruments is an AEC-Q100 compliant network interface with 16 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. The IC has a nominal voltage of 1.8V and features gull wing terminals with nickel palladium gold finish.
ISO1042DW
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ISO1042BDWV
ISO1042BDWV by Texas Instruments is an 8-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, ideal for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
ISO1044BD
ISO1044BD by Texas Instruments is a network interface with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage of 1.8V and max current of 70mA. The package is small outline, rectangular in shape, surface mountable, and has Gull Wing terminals.
ISO1042DWV
ISO1042DWV by Texas Instruments is a network interface IC with 8 terminals, operating b/w -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and nickel palladium gold finish. Ideal for automotive applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ISO1042BDW
ISO1042BQDWVQ1
ISO1042BQDWVQ1 by Texas Instruments is an AEC-Q100 compliant network interface with 8 terminals. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring a small outline package style, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
ISO1042QDWVQ1
ISO1042QDWVQ1 by Texas Instruments is an automotive-grade network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, with a supply voltage of 1.8V and peak reflow temperature of 260°C. Ideal for interface circuits in automotive applications due to AEC-Q100 screening level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved