Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ISO1042BDWV by Texas Instruments is an 8-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, ideal for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
Median Price
$3.291
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$3.127
100+ parts
$2.740
1k+ parts
$1.548
10k+ parts
-
DigiKey
$6.060
$4.009
$3.599
$3.411
Arrow
$3.182
Digiode
$2.971
Chip Stock
Vyrian
Semicontronic
$2.250
$2.194
$2.182
Ampacity Inc.
Argo Parts USA
$2.322
Continental Prestige Electronics
$2.276
Bastille Electronics
$2.676
$2.542
$2.415
$2.382
Corphita
$2.814
Parana Technologies
$6.401
$7.150
ChromeModa Solutions
$7.192
$5.897
IDEA Electronic Components Group
$6.473
Corohmni
$7.583
Advanced Electronics
$12.139
$11.532
Lixinc
DigiPath Technology Company
$6.484
Formix International (Excess)
Robosynatics
Lucentia Tech
$6.628
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable or rugged applications.
Being surface mountable means easy installation on circuit boards, saving space and simplifying assembly process.
Having 8 terminals allows for versatile connectivity options and compatibility with a variety of devices.
High maximum operating temperature ensures reliable performance even in harsh environmental conditions.
The use of nickel palladium gold terminal finish provides excellent conductivity, corrosion resistance, and solderability.
Compact width size makes it easy to integrate into space-constrained designs without compromising functionality.
Automotive temperature grade ensures the product can withstand wide temperature ranges typically encountered in automotive applications.
Being designed for a nominal supply voltage of 5V makes it compatible with standard power sources, ensuring easy integration into existing systems.
Network Interfaces ISO1042BDWV attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ISO1042BDWV Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - ISO1042yyy 11/Jan/2021
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Mde Semiconductor
KSZ8721BLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
SN65HVD234DRG4
SN65HVD234DRG4 by Texas Instruments is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a max supply current of 6 mA. This IC is commonly used in automotive applications due to its temperature grade and small package size.
DP83869HMRGZR
DP83869HMRGZR by Texas Instruments is an Ethernet transceiver IC with 1.1V supply voltage and 1000000 Mbps data rate. It operates in automotive temperature grade range of -40 to 125 °C, suitable for network interfaces in automotive applications. The chip carrier package has 48 terminals, nickel/palladium/gold/silver finish, and is surface mountable with a square shape.
MAX3051ESA+TCJN
INTERFACE CIRCUIT;
DP83640TVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
DP83848YB/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
MCP2542FD-E/SN
Microchip Technology
MCP2542FD-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a data rate of 8 Mbps. It operates in automotive temperature range (-40 to 125°C) and has a small outline package style. It is used for network interfaces in various applications.
TCAN334GDCNT
TCAN334GDCNT by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C. It features a small outline package style and supports data rates up to 5 Mbps. Ideal for automotive applications requiring a 3.3V supply voltage and interface circuit functionality.
DP83825IRMQT
Texas Instruments DP83825IRMQT is an Ethernet transceiver with a data rate of 100Gbps. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. The chip carrier package style with 24 terminals makes it suitable for network interfaces in various applications.
SN65HVD1050D
SN65HVD1050D by Texas Instruments is a network interface IC with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is designed for automotive applications. With a temperature range from -40 to 125°C, it features gull wing terminals and small outline packaging.
ADM3050EBRIZ-RL
ADM3050EBRIZ-RL by Analog Devices is a Network Interface with 8 terminals, operating from -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and supports MIL-STD-1553 data bus transceiver applications in automotive environments.
SN65HVD233SJD
SN65HVD233SJD by Texas Instruments is a military-grade interface circuit with 1 Mbps data rate and 3.3V nominal voltage. It features a ceramic, metal-sealed co-fired package body material and operates in temperatures ranging from -55 to 210°C. Ideal for network interfaces requiring low power consumption and high reliability in harsh environments.
SN65HVD233D
SN65HVD233D by Texas Instruments is an automotive-grade interface circuit with a data rate of 1 Mbps. It operates at temperatures ranging from -40 to 125°C and has a nominal voltage of 3.3V. This network interface IC comes in a small outline package, making it suitable for various automotive applications.
TLE9250XSJXUMA1
Infineon Technologies
TLE9250XSJXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for telecom applications requiring a small outline package with nickel gold palladium finish and gull wing terminal form.
KSZ8895RQXCA
The Microchip Technology KSZ8895RQXCA is an Ethernet switch with 5 transceivers, supporting data rates up to 100 Mbps. It operates at temperatures b/w 0-70°C and has a nominal voltage of 1.2V. This network interface IC comes in a rectangular flatpack package style, suitable for surface mount applications.
KSZ8001LI-TR
SN65HVD232QD
SN65HVD232QD by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate. It operates at 3.3V, suitable for automotive applications. This small outline package has 8 terminals and can withstand temperatures from -40 to 125°C.
MCP2562-E/MFVAO
MCP2562-E/MFVAO by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, -40 to 125°C temp range. Small outline package with 8 terminals, AEC-Q100 screening.
MCP2562FD-E/MF
MCP2562FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 70 mA supply current, suitable for automotive applications due to TS16949 screening and small outline package style.
AR8035-AL1B-R
Qualcomm
The Qualcomm AR8035-AL1B-R is a network interface chip with 48 terminals and a very thin profile. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 1000 Mbps. It is commonly used as an Ethernet transceiver in industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ISO1050DUB
ISO1050DUB by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, Gull Wing terminal form, and nickel palladium gold finish. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ISO1042BDWVR
ISO1042BDWVR by Texas Instruments is an 8-terminal network interface in a small outline package. With a temperature range of -40 to 125°C, it's ideal for automotive applications. Featuring nickel palladium gold terminal finish, it operates at a nominal voltage of 5V.
ISO1042DWVR
ISO1042DWVR by Texas Instruments is a network interface IC with 8 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 5V. This IC is commonly used in automotive applications for interface circuits.
ISO1042BQDWVRQ1
The Texas Instruments ISO1042BQDWVRQ1 is an AEC-Q100 compliant network interface with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and nickel palladium gold finish. Ideal for automotive applications requiring a 1.8V supply voltage and interface circuit connectivity.
ISO1050DWR
ISO1050DWR by Texas Instruments is a 16-terminal network interface with a small outline package. It operates b/w -55 to 105°C, with a peak reflow temperature of 260°C. Ideal for telecom applications requiring an interface circuit at a nominal voltage of 5V.
ISO1042BDWR
ISO1042BDWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The terminal finish is nickel palladium gold, and it has a gull wing terminal form for easy installation.
ISO1042QDWVRQ1
ISO1042QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold finish, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
ISO1044BDR
ISO1044BDR by Texas Instruments is a Network Interface with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Features include 1.8V supply voltage, 70mA max supply current, and Gull Wing terminal form.
ISO1042DWR
ISO1042DWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, making it suitable for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
ISO1042BQDWRQ1
ISO1042BQDWRQ1 by Texas Instruments is a network interface IC with 16 terminals and a small outline package style. It operates in automotive temperature grades (-40 to 125°C) and has a nominal voltage of 1.8V. This IC is suitable for use in interface circuits for telecom applications.
ISO1050DW
ISO1050DW by Texas Instruments is a network interface IC with 16 terminals in a small outline package. It operates at temperatures ranging from -55 to 105 °C and has a nominal voltage of 5V. This interface circuit is commonly used in telecom applications.
ISO1042QDWRQ1
ISO1042QDWRQ1 by Texas Instruments is an AEC-Q100 compliant network interface with 16 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. The IC has a nominal voltage of 1.8V and features gull wing terminals with nickel palladium gold finish.
ISO1042DW
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ISO1044BD
ISO1044BD by Texas Instruments is a network interface with 8 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage of 1.8V and max current of 70mA. The package is small outline, rectangular in shape, surface mountable, and has Gull Wing terminals.
ISO1042DWV
ISO1042DWV by Texas Instruments is a network interface IC with 8 terminals, operating b/w -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and nickel palladium gold finish. Ideal for automotive applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
ISO1042BDW
ISO1042BQDWVQ1
ISO1042BQDWVQ1 by Texas Instruments is an AEC-Q100 compliant network interface with 8 terminals. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring a small outline package style, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
ISO1042QDWVQ1
ISO1042QDWVQ1 by Texas Instruments is an automotive-grade network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, with a supply voltage of 1.8V and peak reflow temperature of 260°C. Ideal for interface circuits in automotive applications due to AEC-Q100 screening level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved