Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VNB10N07-E by STMicroelectronics is a peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 10A and turn-on time of 0.9us. This small outline package driver is ideal for applications requiring sink output current flow direction in compact spaces.
Median Price
$1.972
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
EXC GmbH
1+ parts
$1.929
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$2.015
Vyrian
Digiode
Bristol Electronics
Dan-Mar Components
Anansix
LIBRA Elektronik GmbH
Fibra_Brandt Electronic GMBH
Continental Prestige Electronics
$1.590
$1.120
$0.809
Aranea Global
$1.975
$1.896
Argo Parts USA
Modulus Dynamics
$2.237
$2.214
$2.147
Corohmni
$2.478
IDEA Electronic Components Group
$8.304
$7.474
Aztec Data Supply Inc.
$10.230
MKK Technologies
$15.615
DigiPath Technology Company
AZTECH Wire
$17.508
Semicontronic
$19.500
$19.012
$18.915
Microchip USA
$19.682
Ampacity Inc.
$43.500
Kepictronics
Lixinc
Perfect Parts
Corphita
Parana Technologies
$9.929
Cyclops Electronics Ltd (Excess)
The use of plastic/epoxy material makes the product lightweight and durable, ideal for long-term use.
The multiple built-in protections ensure the safety of the peripheral driver and connected devices, providing peace of mind against potential damage.
Having only 2 terminals simplifies the installation process and reduces the chances of wiring errors, making it user-friendly.
The compact design with a low maximum seated height allows for easy integration into various setups, saving space.
With a high output peak current limit, the peripheral driver can efficiently handle demanding tasks and provide reliable performance.
The interface IC type offers flexibility in compatibility with different systems, enhancing the versatility of the peripheral driver.
Peripheral Drivers VNB10N07-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
VNB10N07-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - D2PAK Lead Modification 04/Oct/2013
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
First Components International
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Surge Components
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BSP752RXUMA2/SAMPLE
Infineon Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
VN750B5-E
STMicroelectronics' VN750B5-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 2A. Ideal for applications requiring sink output current flow direction in compact spaces.
IRS44262SPBF
IRS44262SPBF by Infineon Technologies is a peripheral driver with 8 terminals, operating voltage range of 11.2-20V, and built-in under voltage protection. It is a CMOS technology-based half bridge peripheral driver suitable for automotive applications due to its small outline package and source/sink current flow capability. With turn-on/off times of 0.095 us, it offers a nominal output peak current limit of 3.3A for efficient performance in various automotive systems.
UDN2982LWTR-T
Allegro MicroSystems
UDN2982LWTR-T by Allegro MicroSystems is a peripheral driver with 8 functions. It has a max supply voltage of 50V and can handle a max output current of 0.35A. This IC type is commonly used as a buffer or inverter based peripheral driver in various applications.
L293NE
L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.
SI9986DY-T1-E3
Vishay Siliconix
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PTPS1HC100BQPWPRQ1
PTPS1HC100BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 14 terminals, operating voltage range of 3-28V, and AEC-Q100 screening. It offers built-in protections for transient and over current events. Ideal for automotive applications due to its high side driver feature and compact rectangular package design.
VNS3NV04DPTR-E
VNS3NV04DPTR-E by STMicroelectronics is a peripheral driver with 2 functions, built-in thermal and overvoltage protections. It has 8 terminals, GULL WING form, and can handle a peak current limit of 5A. Ideal for applications requiring sink output flow direction and fast turn-on time of 1.35us.
TPS22810DBVR
TPS22810DBVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates b/w -40 to 105°C, suitable for industrial applications requiring transient, thermal, and under-voltage protections. The small outline package with gull wing terminals makes it ideal for surface mount designs in compact spaces.
ULN2003A
Diodes Incorporated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
BSP752TXUMA1
BSP752TXUMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. This MOS technology-based driver has a nominal output peak current limit of 1.7 A and is ideal for industrial applications requiring sink output flow direction.
DRV104PWPR
DRV104PWPR by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. It has a max output current of 1.2A, making it suitable for industrial applications requiring precise control of peripheral devices. With its small outline package style and source flow direction, this driver is ideal for compact electronic designs that demand efficient power management.
DS2482X-100+T
Analog Devices
DS2482X-100+T by Analog Devices is a peripheral driver with 9 terminals, operating voltage range of 2.9V to 5.5V, and built-in overcurrent protection. It features a compact rectangular package style suitable for industrial applications requiring source output current flow direction.
NUD3160DMT1G
NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.
VN750PS-E
VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.
BSP78HUMA1
BSP78HUMA1 by Infineon Technologies is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85 °C) with a nominal voltage of 12V. With a small outline package style, it is ideal for applications requiring a sink output current flow direction and turn-on/off time of 100 us.
CSD88599Q5DC
CSD88599Q5DC by Texas Instruments is a half bridge based peripheral driver with a max supply voltage of 54V. It features a small outline package style and operates in temperatures ranging from -55 to 150°C. Ideal for applications requiring source and sink output current flow direction, such as military-grade electronics.
ULN2003D
Philips Semiconductors
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MIC5841YWM-TR
Microchip Technology
MIC5841YWM-TR by Microchip Technology is an 8-bit SIPO peripheral driver with inverted output polarity. It operates at temperatures ranging from -40 to 85°C and has a max supply current of 16mA. This small outline package with gull wing terminals is ideal for industrial applications requiring standard input characteristics and transient protection.
AP2171WG-7
AP2171WG-7 by Diodes Inc. is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage conditions. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 1A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VNB14NV04TR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Turn-off Time: 25 us; No. of Functions: 1;
VNB14N0413TR
VNB14N0413TR by STMicroelectronics is a peripheral driver with a max output peak current limit of 14A. It has built-in protections for transient, over current, and thermal issues. This MOS technology-based device is commonly used as a buffer or inverter based peripheral driver.
VNB14NV04-E
VNB14NV04-E by STMicroelectronics is a peripheral driver with built-in protections against transient, over current, over voltage, and thermal issues. It has a max seated height of 4.826 mm and a width of 9.15 mm. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
VNB14N04
VNB14N04 by STMicroelectronics is a MOS technology peripheral driver with built-in protections for transient, over current, and thermal issues. It features an open-drain output polarity with a nominal output peak current limit of 14A. This small outline package is ideal for applications requiring buffer or inverter based interface ICs.
VNB14N04-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
VNB10N07TR-E
VNB10N07TR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a max output peak current limit of 10A and a turn-on time of 0.9us. This small outline package driver is ideal for applications requiring sink output current flow direction.
VNB10N07
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Turn-off Time: 6 us;
VNB10N0713TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Maximum Seated Height: 4.6 mm; Turn-off Time: 6 us;
VNB14N04TR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
VNB14NV04
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
VNB14NV0413TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved