Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STW36N55M5 by STMicroelectronics is a N-CHANNEL FET with 550V DS Breakdown Voltage, 33A Drain Current, and 0.08 ohm On Resistance. Ideal for SWITCHING applications due to its 132A Pulsed Drain Current capability. Operating in ENHANCEMENT MODE, it has a max power dissipation of 190W at 150 °C.
Median Price
$4.080
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Digiode
1+ parts
$1.206
100+ parts
-
1k+ parts
10k+ parts
Bristol Electronics
$6.953
$3.013
Vyrian
Anansix
Dan-Mar Components
IDEA Electronic Components Group
$0.407
$0.366
MKK Technologies
$0.765
DigiPath Technology Company
Corphita
$1.143
Component Stockers USA
$5.190
AZTECH Wire
$10.660
A-Z Elektronik GmbH
Perfect Parts
Alle Elektronik GmbH
Parana Technologies
$0.486
Kepictronics
Eastek
This material provides durability and protection, making the transistor suitable for various applications in different environments.
N-channel FETs typically have better performance characteristics compared to P-channel FETs, making this product a good choice for high-performance applications.
With a high breakdown voltage, this transistor can handle high voltage applications without the risk of damage.
The high power dissipation capability allows this transistor to handle high power loads efficiently.
With a high maximum drain current rating, this transistor can handle a significant amount of current flow, making it suitable for high-current applications.
Power Field Effect Transistors (FET) STW36N55M5 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
STW36N55M5 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev OBS 3/Jul/2020
PCN Assembly/Origin - IPG/14/8475 16/May/2014
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STD25NF10LT4
STMicroelectronics
STD25NF10LT4 by STMicroelectronics is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 25A Drain Current, 450mJ Avalanche Energy Rating, and operates in ENHANCEMENT MODE. With a compact SMALL OUTLINE package and high power dissipation of 100W, it offers efficient performance in various electronic designs.
BS170
Itt Components
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRF530NSTRLPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; JESD-609 Code: e3; Maximum Pulsed Drain Current (IDM): 60 A;
BSC060N10NS3G
Infineon Technologies
BSC060N10NS3G by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, 360A IDM, and 0.006 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. This PLASTIC/EPOXY transistor has a small outline package style and can withstand temperatures up to 150°C.
NVTFS5116PLTAG
Onsemi
NVTFS5116PLTAG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072ohm RDS(on). Ideal for power management applications in small outline packages. Operating at up to 175°C, it features a built-in diode and avalanche energy rating of 45mJ.
AUIRF5210STRL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Pulsed Drain Current (IDM): 140 A; Transistor Element Material: SILICON;
SISS71DN-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SISS71DN-T1-GE3 is a P-channel FET with 100V DS breakdown voltage, ideal for switching applications. Featuring 40A max pulsed drain current and 0.082 ohm max on-resistance, it operates in enhancement mode with -50 to 150°C temperature range. Suitable for surface mount designs, this transistor offers high performance in a compact square package.
JANTX2N6796U
Defense Logistics Agency
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-CQCC-N15; Maximum Pulsed Drain Current (IDM): 32 A; Operating Mode: ENHANCEMENT MODE;
FDBL86062_F085
Fairchild Semiconductor's FDBL86062_F085 is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 300A Drain Current. Ideal for SWITCHING applications, it features an EAS of 352mJ, 0.002 ohm On Resistance, and operates in ENHANCEMENT MODE.
IRF640
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Finish: MATTE TIN;
IRLML9303TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING;
SI7469DP-T1-E3
SI7469DP-T1-E3 by Vishay Intertechnology is a P-CHANNEL FET with 80V DS Breakdown Voltage, 40A IDM, and 0.025 ohm RDS(ON). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 83W.
IRLML0040TRPBF
Infineon's IRLML0040TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 15A IDM, 3.6A ID, and 0.056 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it offers high performance in compact designs.
IRFP460LCPBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Operating Temperature: 150 Cel; Maximum Drain-Source On Resistance: .27 ohm;
BSZ097N04LSGATMA1
Infineon BSZ097N04LSGATMA1 is a N-CHANNEL FET with 40V DS breakdown voltage, ideal for SWITCHING applications. Features include 160A IDM, 0.0142 ohm RDS(on), and 20mJ EAS rating. Operates in ENHANCEMENT MODE up to 175°C, with PLASTIC/EPOXY package and DUAL terminal position.
FDS4465
FDS4465 by Onsemi is a P-CHANNEL power field effect transistor (FET) with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 13.5A and max power dissipation of 2.5W.
SI7315DN-T1-GE3
Vishay Intertechnology's SI7315DN-T1-GE3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a 10A IDM and 0.315 ohm RDS(on), this MOSFET operates in ENHANCEMENT MODE with a 9.8mJ EAS rating. Suitable for surface mount designs, it has a SQUARE package shape and DUAL terminal position.
G3R40MT12K
Genesic Semiconductor
Power Field-Effect Transistors;
FQD1N80TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 1 A;
SPW47N60C3
SPW47N60C3 by Infineon Technologies is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It features a Max Drain Current of 47A and 0.07 ohm On Resistance, suitable for high-power applications. Ideal for use in power supplies, motor control, and industrial equipment due to its high current handling capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STW3N150
STW3N150 by STMicroelectronics is a N-CHANNEL Power FET with 1500V DS Breakdown Voltage. It has a Max Drain Current of 2.5A and Max Power Dissipation of 140W, suitable for SWITCHING applications. The transistor operates in ENHANCEMENT MODE and features a built-in DIODE, making it ideal for high-power switching circuits.
STW34NM60N
STW34NM60N by STMicroelectronics is a N-CHANNEL FET with 600V DS Breakdown Voltage, ideal for SWITCHING applications. It features 116A IDM, 345mJ EAS, and 0.105 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 210W at 150°C.
STW38N65M5
STW38N65M5 by STMicroelectronics is a N-CHANNEL Power FET with 650V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 120A IDM, 660mJ EAS, and 0.095 ohm RDS(on). Operating in ENHANCEMENT MODE at up to 150°C, it has a max power dissipation of 190W.
STW38N65M5-4
Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STW34NM60ND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 210 W; No. of Elements: 1; Maximum Pulsed Drain Current (IDM): 116 A;
STW3N170
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; No. of Elements: 1; Peak Reflow Temperature (C): NOT SPECIFIED;
STW34N65M5
STW34N65M5 by STMicroelectronics is a N-CHANNEL FET with 650V DS Breakdown Voltage, ideal for SWITCHING applications. It features 112A IDM and 0.11 ohm RDS(on), operating in ENHANCEMENT MODE at up to 150°C. The PLASTIC/EPOXY package with THROUGH-HOLE terminals ensures reliable performance in various power electronics designs.
STW31N65M5
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Drain Current (Abs) (ID): 22 A; Peak Reflow Temperature (C): NOT SPECIFIED;
STW34NB20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; JESD-30 Code: R-PSFM-T3; Package Shape: RECTANGULAR;
STW32N55M5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JEDEC-95 Code: TO-247;
STW30N65M5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Minimum DS Breakdown Voltage: 650 V; JESD-609 Code: e3;
STW30NM50N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; JESD-30 Code: R-PSFM-T3; Maximum Drain Current (ID): 27 A;
STW32N65M5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 650 mJ;
STW33N60M6
STW30NM60ND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; No. of Elements: 1; JESD-30 Code: R-PSFM-T3;
STW30NF20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Avalanche Energy Rating (EAS): 140 mJ; Maximum Operating Temperature: 150 Cel;
STW32NM50N
STW32NM50N by STMicroelectronics is a N-CHANNEL Power FET with 500V DS Breakdown Voltage, 88A IDM, and 0.13 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 150°C temperature.
STW30NM60D
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Package Shape: RECTANGULAR; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STW33N20
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
STW33N60DM2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Maximum Drain Current (ID): 24 A; Maximum Drain-Source On Resistance: .13 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved