Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STP8NS25FP by STMicroelectronics is a N-CHANNEL FET with 250V DS Breakdown Voltage, 32A IDM, and 0.45 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation and ENHANCEMENT MODE operation. Package style is FLANGE MOUNT with ISOLATED case connection.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
IDEA Electronic Components Group
$1.162
$1.046
AZTECH Wire
$2.150
$2.060
$2.020
$1.980
MKK Technologies
$2.185
DigiPath Technology Company
A-Z Elektronik GmbH
Kepictronics
Alle Elektronik GmbH
Authorized Procurement Solutions
Parana Technologies
$1.389
Corphita
The plastic/epoxy package body material provides durability and protection for the FET, ensuring a longer lifespan and reliable performance.
N-channel FETs are commonly used in low-side switch applications, making this FET versatile for a variety of switching tasks.
The built-in diode simplifies circuit design and protects the FET from voltage spikes during switching operations.
Designed specifically for switching applications, this FET is optimized for fast and efficient switching operations.
With a minimum breakdown voltage of 250 V, this FET can handle high voltage applications with ease.
The high maximum pulsed drain current allows for heavy-duty switching operations without risk of damaging the FET.
With a maximum power dissipation of 30 W, this FET can handle high power loads without overheating.
Metal-oxide semiconductor technology ensures high efficiency and low ON resistance for improved performance.
The high maximum operating temperature of 150 °C allows for reliable performance even in high-temperature environments.
The low drain-source on resistance of 0.45 ohm minimizes power loss and improves efficiency during switching operations.
Power Field Effect Transistors (FET) STP8NS25FP attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
STP8NS25FP Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
4554
Jw Miller Magnetics
Other Semiconductors;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
IRF7303TRPBF
International Rectifier
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
IRFR120NTRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Terminal Position: SINGLE; Maximum Time At Peak Reflow Temperature (s): 30;
IRF7309TRPBF
Infineon Technologies
IRF7309TRPBF by Infineon is a Power FET with N-Channel and P-Channel types, suitable for switching applications. It features 2 elements with built-in diode, a max drain current of 4A, and a min DS breakdown voltage of 30V. With a package style of small outline and operating temperature up to 150°C, it's ideal for compact electronic devices requiring efficient power management.
IRF9530
Harris Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Qualification: Not Qualified; Case Connection: DRAIN;
FQP47P06
FQP47P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 47A Drain Current. Ideal for SWITCHING applications, it features an IDM of 188A, EAS of 820mJ, and 0.026 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 160W at 175°C.
IRF7103TRPBF-1
Power Field-Effect Transistors;
FQB22P10TM
FQB22P10TM by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage, 88A IDM, and 0.125 ohm RDS. Ideal for SWITCHING applications, it features a built-in DIODE in a RECTANGULAR package with GULL WING terminals. Operating in ENHANCEMENT MODE, it has an EAS of 710 mJ and can handle up to 125W power dissipation at 175°C.
NTD5865NLT4G
NTD5865NLT4G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 137A IDM, and 0.019 ohm RDS. It is an N-CHANNEL transistor for SWITCHING applications. Operating in ENHANCEMENT MODE, it has a max power dissipation of 52W and can withstand temperatures from -55 to 150 °C.
FDS3672_NL
FDS3672_NL by Fairchild Semiconductor is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 7.5A Drain Current, 0.023 ohm On Resistance, and 150°C Operating Temperature. Package: PLASTIC/EPOXY, GULL WING terminals in RECTANGULAR shape.
IRF9540NPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Pulsed Drain Current (IDM): 76 A;
MSC035SMA170B
Microsemi
NVTFS5116PLTAG
NVTFS5116PLTAG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072ohm RDS(on). Ideal for power management applications in small outline packages. Operating at up to 175°C, it features a built-in diode and avalanche energy rating of 45mJ.
SI7461DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7461DP-T1-GE3 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 8.6A Drain Current, and 0.0145 ohm On Resistance. Ideal for power management applications due to its 60A Pulsed Drain Current capability and 125mJ Avalanche Energy Rating in a small outline package.
NVMFS5113PLT1G
NVMFS5113PLT1G by Onsemi is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 415A and an avalanche energy rating of 315mJ. This transistor is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of MSL1.
SQ2389ES-T1_GE3
Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
FDS4465
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Operating Mode: ENHANCEMENT MODE;
FQP27P06
FQP27P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 108A IDM, 560mJ EAS, and 0.07 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 120W at 175°C.
NDT3055L
NDT3055L by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 25A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a RECTANGULAR package. Operating from -65 to 150 °C, it has 0.1 ohm Drain-Source Resistance and 3W Power Dissipation.
SQM40P10-40L_GE3
The Vishay Intertechnology SQM40P10-40L_GE3 is a P-channel power FET with 100V DS breakdown voltage and 160A max pulsed drain current. Ideal for applications requiring high power handling, such as motor control systems or power supplies. Features include a built-in diode, 0.04 ohm max RDS(on), and small outline package style.
NDT452AP
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Pulsed Drain Current (IDM): 15 A; Package Body Material: PLASTIC/EPOXY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STP80NF10
STMicroelectronics
STP80NF10 by STMicroelectronics is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 320A IDM, 350mJ EAS, and 0.015 ohm RDS(ON). With a max power dissipation of 300W and operating temperature up to 175°C, it's suitable for high-power circuits.
STP80NF10FP
STP80NF10FP by STMicroelectronics is a N-CHANNEL FET with 100V DS Breakdown Voltage. It has 152A IDM and 350mJ EAS, ideal for SWITCHING applications. Operating in ENHANCEMENT MODE, it offers 0.015 ohm Drain-Source On Resistance and can handle up to 40W power dissipation.
STP8NK100Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; Package Shape: RECTANGULAR; Maximum Drain-Source On Resistance: 1.85 ohm;
STP8N90K5
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
STP80PF55
STP80PF55 by STMicroelectronics is a P-CHANNEL FET with 55V DS Breakdown Voltage, 320A IDM, and 0.018 ohm RDS(on). Ideal for SWITCHING applications, it has a max power dissipation of 300W and operates at up to 175°C.
STP80NF55-08
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-220AB;
STP80NF55-06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 210 W; JESD-609 Code: e3; Avalanche Energy Rating (EAS): 1300 mJ;
STP80NF55-06FP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Drain-Source On Resistance: .0065 ohm; Transistor Application: SWITCHING;
STP80NF55-08AG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 55 V;
STP8N120K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Avalanche Energy Rating (EAS): 415 mJ; Minimum Operating Temperature: -55 Cel; No. of Terminals: 3;
STP85NF55
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Case Connection: DRAIN; Package Shape: RECTANGULAR;
STP85NF55L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Drain-Source On Resistance: .01 ohm; Case Connection: DRAIN;
STP80NS04ZB
STP80NS04ZB by STMicroelectronics is a N-CHANNEL FET with 33V DS Breakdown Voltage, 320A IDM, and 0.009 ohm RDS(on). Ideal for SWITCHING applications due to its 200W Pdiss, ENHANCEMENT MODE operation, and 175°C Max Temp.
STP80N240K6
STP80NF03L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 30 V; Operating Mode: ENHANCEMENT MODE; Avalanche Energy Rating (EAS): 2300 mJ;
STP80N450K6
STP80NF03L-04
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Package Body Material: PLASTIC/EPOXY; No. of Elements: 1;
STP80NF03L-04-1
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Operating Temperature: 175 Cel; No. of Elements: 1;
STP80N10F7
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 110 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (ID): 80 A;
STP80N600K6
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved