Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4737-C40-GM by Silicon Labs is a 20-terminal IC with CMOS technology. It operates b/w -20 to 85°C, with a nominal voltage of 3.3V. This Telecom Circuit IC in chip carrier package is ideal for telecom interfaces due to its compact size and low profile design.
Median Price
$6.555
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
$4.940
100+ parts
$4.640
1k+ parts
$4.200
10k+ parts
-
Symmetry
$8.170
Digiode
$4.693
Vyrian
Nova Conductors
Advanced Electronics
$2.614
$2.379
$2.143
Corphita
$4.446
Ampacity Inc.
$9.140
Component Stockers USA
$99.990
Aranea Global
Surface mount technology allows for easy and efficient PCB assembly, making this product suitable for mass production.
The square package shape helps with efficient use of PCB real estate, making it ideal for compact electronic devices.
Having 20 terminals allows for a greater number of connections, making this product versatile and suitable for different telecom interface applications.
The high maximum operating temperature ensures the reliability of the product in various operating conditions.
The nominal supply voltage of 3.3 V is commonly used in telecom applications, making this product compatible with standard power requirements.
Other Function Telecom Interface ICs SI4737-C40-GM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4737-C40-GM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Protective Material Change 30/Mar/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BQ51013BRHLT
BQ51013BRHLT by Texas Instruments is a Telecom IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage of 5V and data rate of 0.002 Mbps, suitable for automotive applications due to its nickel/palladium/gold terminal finish. The chip carrier package style with very thin profile makes it ideal for surface mount designs.
PN5321A3HN/C106,51
NXP Semiconductors
PN5321A3HN/C106,51 by NXP Semiconductors is a telecom IC with 40 terminals in a square chip carrier package. Operating b/w -30 to 85°C, it has a nominal voltage of 5V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and has a low profile design.
CLRC66302HN,118
NXP Semiconductors' CLRC66302HN,118 is a 32-terminal IC with CMOS technology. It operates b/w -25 to 85 °C and has a nominal voltage of 5V. Ideal for telecom circuits, it comes in a square chip carrier package style suitable for surface mount applications.
MAX-M8Q-0
U-blox Ag
MAX-M8Q-0 by U-blox Ag is a GNSS Module with 18 terminals, operating at -40 to 85°C. It has a compact size of 10.1x9.7mm and low profile of 2.7mm, suitable for industrial applications requiring precise location tracking in harsh environments.
NINA-B112-04B
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 4;
TLK2711IRCPG4
TLK2711IRCPG4 by Texas Instruments is a telecom IC with 64 terminals, operating at -40 to 85°C. It has a supply voltage of 2.5V and peak reflow temp of 260°C. Ideal for telecom circuits, it features a flatpack package style and gull wing terminal form.
CC430F5137IRGZR
CC430F5137IRGZR by Texas Instruments is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 2.2V and data rate of 0.5 Mbps. Ideal for industrial applications requiring low-profile surface mount components.
TMS3705DDRQ1
TMS3705DDRQ1 by Texas Instruments is a telecom IC with 16 terminals, operating b/w -40 to 85°C. It has a supply voltage of 5V and terminal pitch of 1.27mm. This AEC-Q100 compliant IC is ideal for industrial applications requiring small outline packages and dual terminal positions.
MAX7033EUI+
Analog Devices
MAX7033EUI+ by Analog Devices is a telecom IC with 28 terminals, operating at -40 to 105°C. It has a supply voltage of 3.3V, consumes 0.00688mA current, and uses CMOS technology. This IC is ideal for telecom circuits in industrial applications due to its small outline package and dual terminal position.
BGM13P22F512GA-V2
Silicon Labs
TELECOM CIRCUIT;
EFR32BG22C224F512IM32-C
WT32I-A-AI6
The Silicon Labs WT32I-A-AI6 is a surface mount telecom IC with 50 terminals. It operates in industrial temperature range (-40 to 85°C) and has a compact rectangular package (15.9mm x 23.9mm). Ideal for telecom circuit applications due to its small form factor and no-lead terminal design.
NINA-B406-00B
TUSB211IRWBR
TUSB211IRWBR by Texas Instruments is a telecom IC with 480.24 Mbps data rate, operating at -40 to 85 °C. It features a 12-terminal chip carrier package suitable for industrial applications requiring a 3.3 V supply voltage and low current consumption of 0.02 mA.
CC2564CRVMT
Texas Instruments CC2564CRVMT is a telecom IC with 76 terminals in a square chip carrier package. It operates at -40 to 85°C, with a data rate of 4 Mbps and nominal voltage of 3.6 V. Ideal for telecom applications requiring high-speed data transmission in industrial environments.
BGM15HA12E6327XTSA1
BGM15HA12E6327XTSA1 by Infineon is a telecom interface IC with 12 terminals in a chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 2.8V, it's ideal for telecom circuit applications requiring surface mount technology.
SIM7000E
Simcom Wireless Solutions
SIM7000E by Simcom Wireless Solutions is a telecom IC with 68 terminals, operating from -40 to 85°C. It has a data rate of 0.375 Mbps and nominal voltage of 3.8V. Ideal for industrial applications requiring reliable communication in harsh environments.
TSC2000IPW
TSC2000IPW by Texas Instruments is a Telecom Interface IC with 20 terminals, operating temperature range of -40 to 85°C. It features CMOS technology, GULL WING terminal form, and SINGLE-ENDED input type. Ideal for telecom circuits due to its small outline package style and industrial temperature grade suitability.
AT86RF215M-ZUR
AT86RF215M-ZUR by Microchip Technology is a telecom IC with RF and baseband circuit. It operates at -40 to 85 °C temperature range, has 48 terminals, and a very thin profile package style. It is suitable for various telecom interface applications.
HMC773ALC3BTR-R5
Analog Devices' HMC773ALC3BTR-R5 is a telecom IC with 12 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. With a very thin profile and no-lead terminal form, it's ideal for telecom interface applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4732-A10-GS
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
SI4744-C10-GMR
SI4744-C10-GMR by Silicon Labs is a surface mount telecom interface IC with 1 function. It has a square package shape, 24 terminals, and a max operating temperature of 85°C. This IC is suitable for telecom circuit applications in industrial settings.
SI4777-A20-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
SI4735-B20-GMR
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4732-A10-GSR
TELECOM CIRCUIT; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
SI4737-C40-GU
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
SI4743-C10-GM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SI4737-C40-GMR
SI4737
TELECOM CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; No. of Functions: 1;
SI4734
TELECOM CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE;
SI4735
SI4730-B20-GMR
SI4731-B20-GM
SI4737-B20-GMR
SI4737-B20-GM
SI4739-B20-GM
SI4738-C40-GMR
SI4738-C40-GM
SI4739-C40-GMR
SI4739-C40-GM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved