Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Seated Height: .6 mm;
Median Price
$2.570
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$2.300
10k+ parts
$2.160
Digiode
$3.106
Vyrian
$3.270
Corphita
$2.943
Cellphone ICs SI4704-D50-GMR attributes and parameters. Explore more Cellphone ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4704-D50-GMR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
IAM-91563-BLKG
Agilent Technologies
RF AND BASEBAND CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4003EUA
Maxim Integrated
MAX4003EUA by Maxim Integrated is a cellphone IC with 8 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features CMOS technology, RF and baseband circuit for telecom applications.
CC1111F8RSPG3
Texas Instruments
The Texas Instruments CC1111F8RSPG3 is a cellphone IC with 36 terminals in a square chip carrier package. Operating at 3V, it features RF and baseband circuit technology, suitable for telecom applications. With a temperature range of 0-85°C, this CMOS device has a terminal pitch of 0.5mm and is surface mountable.
MAX2309ETI+
Analog Devices
MAX2309ETI+ by Analog Devices is a cellphone IC with 28 terminals in a square package. It operates at -40 to 85°C, with power supplies of 3/3.3V and max supply current of 0.0415mA. Ideal for baseband circuits, it has a terminal pitch of 0.5mm and is suitable for industrial temperature grades.
TRF37T05IRGER
TRF37T05IRGER by Texas Instruments is a 24-terminal cellphone IC in a square chip carrier package. Operating b/w -40°C to 85°C, it's ideal for industrial telecom applications requiring RF and baseband circuits at 3.3V supply voltage. With nickel palladium gold finish, it offers high reliability in compact dimensions of 4mm x 4mm x 1mm.
GC5016-PBZ
Texas Instruments GC5016-PBZ is a Cellphone IC with 252 terminals in a GRID ARRAY package. Operating at -40 to 85°C, it has power supplies of 1.8V and 3.3V for RF and baseband circuits. With PLASTIC/EPOXY body material, it's ideal for telecom applications requiring high performance in industrial settings.
CC2420RGZ
CC2420RGZ by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for RF and baseband circuits. With CMOS technology and a nominal voltage of 1.8V, it's ideal for telecom applications requiring compact design and high performance.
SARA-R410M-73B
U-blox Ag
RF AND BASEBAND CIRCUIT; Moisture Sensitivity Level (MSL): 4;
MAX19995ETX+
MAX19995ETX+ by Analog Devices is a 36-terminal cellphone IC with BICMOS technology. It operates b/w -40 to 85 °C, has a package style of chip carrier, and matte tin terminal finish. Ideal for RF front end circuits in telecom applications due to its compact square shape and industrial temperature grade.
AD8348ARU
AD8348ARU by Analog Devices is a Cellphone IC with 28 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and uses BIPOLAR technology for BASEBAND CIRCUIT in telecom applications. The package is RECTANGULAR, SMALL OUTLINE, THIN PROFILE, SHRINK PITCH made of PLASTIC/EPOXY material with GULL WING terminals.
SARA-G350-02S-00
SARA-G350-02S-00 by U-blox Ag is a Cellphone IC with 96 terminals, RF & baseband circuit type, and 3.8V supply voltage. It operates b/w -30°C to 85°C, measures 26mm x 16mm x 2.65mm, and can withstand peak reflow at 245°C for up to 60s. Ideal for compact mobile devices requiring reliable cellular connectivity.
TRF6901PTR
TRF6901PTR by Texas Instruments is a cellphone IC with 48 terminals in a square package. It operates at -40 to 85°C, with supply voltage of 2/3.3V and current draw of 0.04mA. Ideal for RF and baseband circuits in telecom applications due to its low profile design and fine pitch style.
AD7005AS
AD7005AS by Analog Devices is a Cellphone IC with 44 terminals in a square package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. Features CMOS technology, GULL WING terminals, and BASEBAND CIRCUIT telecom IC type.
ADF7901BRUZ-RL7
Analog Devices' ADF7901BRUZ-RL7 is a cellphone IC with 24 terminals in a small outline package. It operates at temperatures from 0 to 50 °C, with a supply voltage of 3V. This RF and baseband circuit is designed for telecom applications requiring surface mount technology.
MAX2055EUP+D
MAX2055EUP+D by Analog Devices is a BICMOS technology Cellphone IC with 20 terminals in a small outline package. It operates b/w -40 to 85 °C, suitable for industrial telecom applications. The package is rectangular, surface-mountable, and has a terminal pitch of 0.65mm.
TCM4400EPNR
TCM4400EPNR by Texas Instruments is a cellphone IC with 80 terminals in a square flatpack package. Operating temperature ranges from -25 to 85°C, suitable for baseband circuits. Features include GULL WING terminals, PLASTIC/EPOXY material, and compact 12x12mm size.
LP3939ILQX
LP3939ILQX by Texas Instruments is a cellphone IC with 16 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF and baseband circuits, operates at 3V supply voltage, and has a terminal pitch of 0.5mm.
ADRF6650ACPZ
Analog Devices' ADRF6650ACPZ is a 56-terminal cellphone IC in a square chip carrier package. Operating from -40 to 105°C, it's ideal for RF and baseband circuits with a nominal voltage of 3.3V. Utilizing BiCMOS technology, this industrial-grade IC has a very thin profile at 0.8mm seated height.
ADL5502ACBZ-P7
ADL5502ACBZ-P7 by Analog Devices is a CELLPHONE IC with BICMOS tech. Features include 3V supply, -40 to 85°C temp range, and RF/BASEBAND circuit type. Its GRID ARRAY package has 8 terminals, 0.5mm pitch, and measures 1.46mm in length/width for telecom applications.
LMV226UR
LMV226UR by Texas Instruments is a CELLPHONE IC with SQUARE package, 4 terminals, and TIN LEAD finish. It operates b/w -40 to 85 °C, suitable for RF and BASEBAND CIRCUITS in telecom applications due to its INDUSTRIAL temperature grade and 2.7 V supply voltage requirement.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved