Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$12.583
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$10.850
100+ parts
-
1k+ parts
10k+ parts
Digiode
$14.316
Vyrian
Aztec Data Supply Inc.
$0.460
Corohmni
$0.499
AZTECH Wire
$5.374
Continental Prestige Electronics
$10.633
Ampacity Inc.
$12.810
Semicontronic
$12.490
$12.426
Corphita
$13.563
Argo Parts USA
Netroflash
$10.308
$10.091
Other Function Telecom Interface ICs MGM240PB32VNN3R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
MGM240PB32VNN3R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Surge Components
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
NXP Semiconductors
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
RN4870-I/RM140
Microchip Technology
RN4870-I/RM140 by Microchip Technology is a surface mount telecom interface IC with 1 function. It operates in an industrial temperature range of -40 to 85 °C and has a data rate of 0.01 Mbps. This IC is commonly used in telecom circuits for various applications.
BGT24MTR12E6327XUMA1
Infineon Technologies
BGT24MTR12E6327XUMA1 by Infineon is a telecom IC with 32 terminals in a chip carrier package. It operates b/w -40 to 105°C, suitable for industrial use. With a supply voltage of 3.3V, it features a terminal pitch of 0.5mm and is surface mountable for various telecom interface applications.
ATWILC3000-MR110CA
ATWILC3000-MR110CA by Microchip Technology is a telecom IC with 65 Mbps data rate, operating at -40 to 85°C. It has 36 terminals in a rectangular package style, suitable for surface mount applications. With a nominal voltage of 3.3V, it is ideal for various telecom interface functions.
RS9116W-SB00-B00-X23
Silicon Labs
Silicon Labs RS9116W-SB00-B00-X23 is a telecom IC with 126 terminals, operating from -40 to 85°C. It has a supply voltage of 1.85V and MSL level of 3, suitable for industrial applications requiring reliable telecom circuit interfaces in surface-mount packages.
ADL5350ACPZ-R7
Analog Devices
ADL5350ACPZ-R7 by Analog Devices is a telecom IC with 8 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and no lead terminal form. Ideal for telecom circuits, it operates at 3V with a peak reflow temp of 260°C.
BMD-345-A-R
U-blox Ag
HT12D(20SOP)
Holtek Semiconductor
HT12D(20SOP) by Holtek Semiconductor is a CMOS telecom IC with 20 terminals. It operates at -20 to 70°C, powered by 2.4/12V supplies. This small outline package is surface mountable and commonly used in telecom circuits for various applications.
ISL32275EFVZ-T
Intersil
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
CC3135MODRNMMOBR
CC3135MODRNMMOBR by Texas Instruments is a telecom IC with 63 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm, suitable for industrial applications requiring reliable communication interfaces in compact spaces. With surface mount capability and nickel gold finish, it offers robust connectivity solutions in various electronic devices.
AFE031AIRGZR
AFE031AIRGZR by Texas Instruments is a 48-terminal telecom IC with 3.3V supply, operating from -40 to 125°C. It features a low supply current of 0.0053mA and is designed for automotive applications requiring a compact chip carrier package with very thin profile. Ideal for telecom circuits needing high reliability in harsh environments.
TLK2711AIRCPR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: HVFQFP; Package Shape: SQUARE;
CC1200RHBR
CC1200RHBR by Texas Instruments is a telecom IC with 32 terminals, operating at 3V. It offers a data rate of 1.25 Mbps and operates in industrial temperature range (-40 to 85°C). This chip carrier package is surface mountable and suitable for telecom circuit applications.
RN41-I/RM630
Microchip Technology's RN41-I/RM630 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and gold over nickel terminal finish. Suitable for industrial applications, it comes in a rectangular package style with surface mount capability.
BGM111A256V2
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
BGM240SA22VNA2
SJA1105TELY
The NXP SJA1105TELY is a telecom interface IC with 159 terminals in a grid array package. It operates b/w -40°C to 105°C, supporting data rates up to 100 Mbps. Designed for telecom circuits, it has a low profile and fine pitch, making it suitable for various applications.
WT12-A-AI3
Silicon Labs' WT12-A-AI3 is a telecom IC with 31 terminals, CMOS technology, and 3 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. This surface-mount rectangular package (14x25 mm) is ideal for telecom interface applications.
RCB-F9T
GNSS Module;
ATECC508A-SSHDA-T
Microchip ATECC508A-SSHDA-T is a telecom IC with 1 function, operating at -40 to 85°C. It features CMOS technology, 3.6V supply voltage, and TS16949 screening level. Ideal for telecom circuits, this small outline package has 8 terminals in a rectangular shape for surface mount applications.
PN5180A0HN/C1Y
TELECOM CIRCUIT; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM240PA32VNA3
MGM240PB32VNA3
MGM240PA22VNA3
MGM240PB32VNN3
MGM240PB22VNA3
MGM240PA32VNN3
MGM240SD22VNA2
MGM240PA32VNA3R
MGM240SD22VNA2R
MGM240PA22VNA3R
MGM240PB32VNA3R
MGM240SA22VNA2
MGM240PB22VNA3R
MGM240PA32VNN3R
MGM240SA22VNA2R
MGM210LA22JNF2
MGM210LA22JIF2
MGM210LA22JNF2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved