Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$7.790
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$5.840
1k+ parts
$4.930
10k+ parts
-
Digiode
$13.794
Vyrian
Nova Conductors
Corohmni
$0.067
Aztec Data Supply Inc.
$0.480
Ampacity Inc.
$12.340
Corphita
$13.068
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Other Function Telecom Interface ICs MGM240PA32VNN3R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
MGM240PA32VNN3R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
New Jersey Semiconductor Products
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
ESP32-WROVER-IE
Espressif Systems (shanghai)
ESP32-WROVER-IE by Espressif Systems is a telecom IC with 38 terminals, operating at -40 to 85°C. It has a data rate of 150 Mbps and runs on 3.3V supply voltage. Ideal for industrial applications requiring high-speed connectivity in compact spaces.
MD0100N8-G
Microchip Technology
MD0100N8-G by Microchip Tech is a telecom IC with 3 terminals. It operates b/w -40 to 125°C, suitable for automotive applications. The package is small outline, low profile, with matte tin finish and single terminal position.
SAM-M8Q-0
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BGM113A256V21
Silicon Labs
BGM113A256V21 by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a terminal pitch of 0.8mm.
CC2564MODACMOG
CC2564MODACMOG by Texas Instruments is a telecom IC with 35 terminals, operating at -30 to 85°C. It has a data rate of 4 Mbps and nominal voltage of 3.6V. This surface-mount IC in rectangular package shape is ideal for telecom applications requiring high-speed data transmission.
450-0177R
Laird Technologies
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
DA14682-00F08A92
Dialog Semiconductor
Other Telecom ICs; Peak Reflow Temperature (C): 255; Moisture Sensitivity Level (MSL): 3;
RN4871-I/RM128
RN4871-I/RM128 by Microchip Technology is a telecom IC with 16 terminals, operating at -40 to 85 °C. It has a data rate of 0.01 Mbps and nominal voltage of 3.3 V. Ideal for industrial applications requiring reliable telecom circuit interfaces in compact spaces.
BQ51013BYFPR
BQ51013BYFPR by Texas Instruments is a RECTANGULAR GRID ARRAY IC with 28 terminals, suitable for AUTOMOTIVE applications. It operates b/w -40 to 125 °C and has a supply voltage of 5V. With a data rate of 0.002 Mbps, it is ideal for TELECOM CIRCUITS requiring fine pitch and very thin profile packaging.
AP22814BM8-13
Diodes Incorporated
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
ISO508P
ISO508P by Texas Instruments is a 24-terminal telecom interface IC with a rectangular package style. Operating b/w -40 to 85 °C, it's ideal for industrial applications. With a nominal voltage of 5V and through-hole terminal form, it offers reliable telecom circuit functionality.
AP22811AW5-7
AP22811AW5-7 by Diodes Inc. is a telecom interface IC with 5 terminals, operating b/w -40 to 85°C. It features a small outline package style, matte tin finish, and nominal voltage of 5V. Ideal for telecom circuits, this IC has a low profile design and can withstand peak reflow temperatures up to 260°C.
CC2541F256TRHATQ1
CC2541F256TRHATQ1 by Texas Instruments is a telecom IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, supporting a data rate of 2 Mbps at 3V supply voltage. Ideal for telecom circuits, it has a compact size of 6x6mm and terminal pitch of 0.5mm for industrial applications.
XCC3235MODSF12MOBR
XCC3235MODSF12MOBR by Texas Instruments is a telecom IC with 63 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and comes in a rectangular chip carrier package. Ideal for industrial applications requiring telecom circuit interfaces.
RN42-I/RM615
RN42-I/RM615 by Microchip Technology is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a data rate of 3 Mbps, operates at 3.3V, and is ideal for industrial applications requiring a surface-mount rectangular package with gold over nickel terminal finish.
ODIN-W260-05B
ODIN-W260-05B by U-blox Ag is a surface mount telecom IC with 52 terminals, operating at -40 to 85°C. With a compact size of 14.8mm x 22.3mm and terminal pitch of 1.2mm, it's ideal for industrial applications requiring a nominal voltage of 3.3V.
XB3-24ACM-J
Digi International
Digi International's XB3-24ACM-J is a TELECOM CIRCUIT with 1 Mbps Data Rate. Operating from -40 to 85 °C, it comes in RECTANGULAR package style. Ideal for telecom interfaces, this IC is designed for various applications requiring high-speed data transmission.
BGSF110GN26E6327XTSA1
Infineon Technologies
BGSF110GN26E6327XTSA1 by Infineon is a Telecom IC with 26 terminals in a rectangular chip carrier package. Operating temperature range from -30 to 85°C, suitable for telecom circuits. Utilizes CMOS technology with a nominal voltage of 3V, ideal for surface mount applications.
MAX5980GTJ+T
Analog Devices
MAX5980GTJ+T by Analog Devices is a telecom interface IC with 32 terminals in a square chip carrier package. It operates at temperatures ranging from -40 to 105 °C and has a nominal voltage of 54 V. This IC is commonly used in telecom circuits for various applications.
BQ51013BRHLT
BQ51013BRHLT by Texas Instruments is a Telecom IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage of 5V and data rate of 0.002 Mbps, suitable for automotive applications due to its nickel/palladium/gold terminal finish. The chip carrier package style with very thin profile makes it ideal for surface mount designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM240PA32VNA3
MGM240PB32VNA3
MGM240PA22VNA3
MGM240PB32VNN3
MGM240PB22VNA3
MGM240PA32VNN3
MGM240PB32VNN3R
MGM240SD22VNA2
MGM240PA32VNA3R
MGM240SD22VNA2R
MGM240PA22VNA3R
MGM240PB32VNA3R
MGM240SA22VNA2
MGM240PB22VNA3R
MGM240SA22VNA2R
MGM210LA22JNF2
MGM210LA22JIF2
MGM210LA22JNF2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved