Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT;
Median Price
$9.000
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Symmetry
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$8.550
Nova Conductors
$10.460
Vyrian
Corohmni
$0.334
Aztec Data Supply Inc.
$0.490
Ampacity Inc.
$7.650
Corphita
$8.100
Continental Prestige Electronics
$10.251
Netroflash
AZTECH Wire
$13.099
Argo Parts USA
Other Function Telecom Interface ICs MGM240PB22VNA3R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
MGM240PB22VNA3R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148GS08
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BT832F
Fanstel
BT832F by Fanstel is a surface mount telecom IC with 40 terminals. It operates in an industrial temperature range of -40 to 85°C and has a data rate of 1 Mbps. This compact rectangular package is suitable for various telecom circuit applications.
ODIN-W260-06B
U-blox Ag
Other Telecom ICs;
NRF52840-CKAA-R7
Nordic Semiconductor Asa
NRF52840-CKAA-R7 by Nordic Semiconductor Asa is a 93-terminal GRID ARRAY IC with 2 Mbps data rate, operating from -40 to 85 °C. Ideal for TELECOM CIRCUIT applications due to its low profile and fine pitch design.
EYSHSNZWZ
Kaga Electronics
TELECOM CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; JESD-30 Code: R-XBGA-N28; Minimum Operating Temperature: -40 Cel;
NRF51822-CDAB-R
NRF51822-CDAB-R by Nordic Semiconductor Asa is a telecom IC with 56 terminals in a rectangular package. It operates b/w -25°C to 75°C, with a nominal voltage of 1.8V. The package style is grid array, very thin profile, fine pitch, making it suitable for various telecom circuit applications.
NEO-M8U-05B
NEO-M8U-05B by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. Its compact size of 12.2x16mm and low supply voltage of 3V make it ideal for industrial applications requiring precise positioning and timing accuracy. With AEC-Q100 screening, it's suitable for automotive and IoT devices needing reliable telecom interfaces.
CC430F6137IRGCR
CC430F6137IRGCR by Texas Instruments is a 64-terminal telecom IC with a data rate of 0.25 Mbps and operates b/w -40 to 85°C. It features a package style of CHIP CARRIER, ideal for industrial applications requiring low power consumption and compact design.
BM71BLE01FC2-0B04AA
Microchip Technology
The Microchip Technology BM71BLE01FC2-0B04AA is a telecom IC with 17 terminals, operating temperature range of -40 to 85°C, and data rate of 0.0086 Mbps. It is designed for industrial applications requiring a nominal voltage of 3V, such as wireless communication systems.
CYBT-343026-01
Infineon Technologies
Infineon's CYBT-343026-01 is a telecom IC with 24 terminals in a rectangular microelectronic assembly. Operating b/w -30°C to 85°C, it has a compact size of 12mm width and 15.5mm length with no-lead terminal form. Ideal for telecom interfaces, this surface-mount IC is suitable for various applications requiring reliable connectivity in limited space environments.
SI4432-B1-FMR
Silicon Labs
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
BT8510EPJC
Conexant Systems
Conexant Systems' BT8510EPJC is a CMOS telecom IC with 68 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, requiring 5V supply voltage and drawing 0.1mA current. Ideal for CEPT PCM-30/E-1 applications, it features tin/lead terminal finish and quad position.
RS9116W-SB00-QMS-B24
SA636DK/01,112
NXP Semiconductors
SA636DK/01,112 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include nickel palladium gold terminal finish, 3V supply voltage, and gull wing terminal form for telecom circuit applications.
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
WL1805MODGBMOCT
WL1805MODGBMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. Operating at -20 to 70°C, it supports data rates up to 100 Mbps at 3.7V supply voltage. Ideal for commercial applications requiring high-speed telecommunications functionality.
CC2530F32RHAT
CC2530F32RHAT by Texas Instruments is a 40-terminal telecom IC with a nominal voltage of 3V. It operates b/w -40 to 125°C, suitable for automotive applications. The chip carrier package style has a very thin profile and is surface mountable, making it ideal for compact designs.
OPA2380AIDGKTG4
OPA2380AIDGKTG4 by Texas Instruments is a dual-function telecom interface IC with 2 channels and a nominal voltage of 5V. It comes in a small outline, thin profile package style with a terminal pitch of 0.65mm. Ideal for automotive applications, it operates b/w -40 to 125°C and has low max supply current at 0.016mA.
RN4678-V/RM100
RN4678-V/RM100 by Microchip Tech is a surface mount telecom IC with 33 terminals. Operating temp range -20 to 70°C, voltage supply of 3.3V. Ideal for telecom circuits due to its compact size and commercial temperature grade suitability.
451-00001
Laird Technologies
Laird Technologies' 451-00001 is a telecom IC with 71 terminals, operating at -40 to 85°C. With a supply voltage of 3.3V, it supports data rates up to 2 Mbps. This surface-mount IC in rectangular package is ideal for telecom circuit applications.
XB3-24Z8UM
Digi International
The Digi International XB3-24Z8UM is a surface mount telecom IC with 34 terminals. Operating temperature ranges from -40°C to 85°C, suitable for industrial applications. With a compact size of 13mm x 19mm, it's ideal for telecom circuit integration in various devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM240PA32VNA3
MGM240PB32VNA3
MGM240PA22VNA3
MGM240PB32VNN3
MGM240PB22VNA3
MGM240PA32VNN3
MGM240PB32VNN3R
MGM240SD22VNA2
MGM240PA32VNA3R
MGM240SD22VNA2R
MGM240PA22VNA3R
MGM240PB32VNA3R
MGM240SA22VNA2
MGM240PA32VNN3R
MGM240SA22VNA2R
MGM210LA22JNF2
MGM210LA22JIF2
MGM210LA22JNF2R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved