Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EFR32BG24A010F1024IM40-BR by Silicon Labs is a 40-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, with supply voltage range of 1.71V to 3.8V. Ideal for applications requiring low-profile, surface-mount ICs in various electronic devices.
Median Price
$3.706
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$3.893
Vyrian
Digiode
Argo Parts USA
Continental Prestige Electronics
$3.815
Netroflash
Ampacity Inc.
$7.000
AZTECH Wire
$14.349
Corohmni
$19.252
Advanced Electronics
$56.378
Corphita
Surface mount packaging makes it easy to integrate this IC into a circuit board, saving space and making assembly more efficient.
With a relatively high maximum supply voltage, this IC can handle a wide range of power supply inputs, making it versatile for different applications.
The square package shape offers a balanced layout and efficient use of space on a circuit board.
Having a high number of terminals allows for more connectivity options and versatility in circuit design.
This package style offers thermal management capabilities while maintaining a compact form factor, making it suitable for applications where heat dissipation is important.
The low minimum supply voltage allows for operation in low-power scenarios, making the IC suitable for battery-powered devices.
With a high maximum operating temperature, this IC can withstand harsh environments and extended operation without compromising performance.
The wide range of operating temperatures allows this IC to function reliably in both hot and cold conditions, making it versatile for various applications.
The quad terminal position offers better stability and connectivity, ensuring reliable performance in different operating conditions.
With a low seated height, this IC can be mounted close to the circuit board, reducing signal interference and improving overall performance.
The compact width makes this IC suitable for applications where space is limited, allowing for more efficient circuit board layouts.
The small length of this IC contributes to its overall compactness, making it ideal for applications with size constraints.
Being a System-on-Chip (SoC) peripheral IC, this product integrates multiple functions on a single chip, reducing the need for additional components and simplifying circuit design.
CMOS technology offers low power consumption and high noise immunity, making this IC energy-efficient and reliable in noisy environments.
The no-lead terminal form provides better thermal performance and improved signal integrity, enhancing the overall reliability of the IC.
The nominal supply voltage of 3 V is commonly found in many electronic systems, making this IC compatible with a wide range of applications.
The small terminal pitch allows for dense packing of terminals on the IC, enabling high connectivity in a compact form factor.
Other Function uPs,uCs & Peripheral ICs EFR32BG24A010F1024IM40-BR attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
EFR32BG24A010F1024IM40-BR Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - EFR32MG24x/EFR32BG24x 10/Aug/2022 EFR32xG24x 21/Jun/2022
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
MSP430F67791AIPZ
MSP430F67791AIPZ by Texas Instruments is a 16-bit microprocessor with 6-Ch 10-Bit ADC channels, 32 RAM words, and 524288 ROM words. It operates at a max frequency of 0.032768 MHz and has various peripherals like BOR, DMA(3), RTC, TIMER(4). Ideal for industrial applications requiring low power consumption and high performance.
FT245RQ
FTDI
FT245RQ by FTDI is a 32-terminal peripheral IC with USB bus compatibility. It operates at 3.3-5.25V, -40 to 85°C, and supports an 8-bit external data bus width with a clock frequency of up to 12.02MHz. Ideal for industrial applications requiring microprocessor circuits in compact square chip carrier packages.
MCIMX515DJM8C
MCIMX515DJM8C by NXP Semiconductors is a SYSTEM ON CHIP with 529 terminals, operating at 1.05-1.15V. It features a CMOS technology, low profile GRID ARRAY package style suitable for applications requiring high performance in a compact form factor and temperature range of -20 to 85°C.
XCZU1CG-1UBVA494I
Xilinx
MICROPROCESSOR CIRCUIT; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 4; Terminal Finish: TIN SILVER BISMUTH COPPER NICKEL;
MTFC4GMDEA-4MIT/TR
Micron Technology
MICROPROCESSOR CIRCUIT; Terminal Finish: TIN SILVER COPPER;
BGM13S32F512GA-V3
Silicon Labs
SoC;
CY8C21434-24LTXI
Cypress Semiconductor
PROGRAMMABLE SoC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
QT60240-ISG
Quantum Research Group
Other uPs/uCs/Peripheral ICs;
AM5716AABCXQ1
AM5716AABCXQ1 by Texas Instruments is a 760-terminal SYSTEM ON CHIP with CMOS technology. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 1.11V to 1.2V, it features a fine pitch grid array package style for surface mount assembly.
CY8C4146LQI-S422T
Infineon Technologies
PROGRAMMABLE SoC; Temperature Grade: INDUSTRIAL; Terminal Finish: PURE TIN; Moisture Sensitivity Level (MSL): 3;
PEX8618-BA50BCG
Plx Technology
ATSAMA5D27-WLSOM1
ATSAMA5D27-WLSOM1 by Microchip: Operates at 3-5.5V, -40 to 85°C. With 188 terminals, it's a CMOS microprocessor circuit ideal for various applications requiring high-performance computing in a compact square package.
MCIMX6Q5EYM12AD
MCIMX6Q5EYM12AD by NXP Semiconductors is a System on Chip with 624 terminals, operating at -20 to 105 °C. It features a low profile grid array package style and CMOS technology, suitable for various applications requiring high performance and low power consumption.
AS5140H-ASST
Ams Ag
SYSTEM ON CHIP; Terminal Finish: TIN; JESD-609 Code: e3;
ATSHA204A-MAHCZ-T
ATSHA204A-MAHCZ-T by Microchip operates at 2-5.5V, with a temp range of -40 to 85°C. It's a cryptographic authenticator IC in a compact chip carrier package suitable for secure applications requiring high reliability and TS 16949 screening. Featuring dual terminals and CMOS tech, it's ideal for IoT devices needing robust security measures.
XCZU2EG-1SFVA625E
XCZU2EG-1SFVA625E by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It has 625 terminals in a GRID ARRAY package style, operating b/w 0-100 °C. Suitable for applications requiring low power consumption and high performance in various electronic devices.
MPFS250T-FCG1152I
MPFS250T-FCG1152I by Microchip Tech is a 1152-terminal programmable SoC with CMOS tech. Operates b/w -40 to 100 °C, with supply voltage range of 0.97V to 1.03V. Ideal for applications requiring high-density integration in compact spaces.
CP2108-B02-GM
CP2108-B02-GM by Silicon Labs is a 64-terminal microprocessor circuit with CMOS technology. It operates b/w -40 to 85 °C and has a supply voltage range of 3-3.6 V, making it ideal for industrial applications requiring high performance in a compact square package. With surface mount capability and a low seated height of 0.9 mm, this chip carrier suits space-constrained designs.
EFR32MG21A010F1024IM32-B
EFR32MG21A010F1024IM32-B by Silicon Labs is a 32-terminal, square-shaped chip carrier with a supply voltage range of 1.71V to 3.8V. Operating b/w -40°C to 125°C, it's an automotive-grade System on Chip (SoC) with CMOS technology ideal for various peripheral applications.
XC7Z020-3CLG400E
The Xilinx XC7Z020-3CLG400E is a System on Chip with CMOS technology. It operates b/w 0-100°C, with supply voltage range of 0.95-1.05V. Featuring a grid array package style, it's ideal for applications requiring low profile and fine pitch components in the Other Function uPs,uCs & Peripheral ICs category.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFR32BG22C112F352GM32-C
SoC; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
EFR32MG21A020F1024IM32-B
EFR32MG21A020F1024IM32-B by Silicon Labs is a 32-terminal, CMOS System on Chip with a supply voltage range of 1.71V to 3.8V. Ideal for automotive applications, it operates b/w -40°C to 125°C and features a compact square package style with matte tin finish for surface mount assembly.
EFR32MG21A020F512IM32-B
EFR32MG21A020F512IM32-B by Silicon Labs is a 32-terminal, square-shaped chip carrier with a supply voltage range of 1.71V to 3.8V. Operating b/w -40°C to 125°C, it's an automotive-grade System on Chip (SoC) suitable for various IoT applications due to its CMOS technology and compact dimensions of 4mm x 4mm.
EFR32MG21A020F768IM32-B
SYSTEM ON CHIP; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32MG21A010F512IM32-B
EFR32MG24B220F1536IM48-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Supply Voltage: 1.71 V;
EFR32MG24B010F1536IM40-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Seated Height: .9 mm;
EFR32MG21A010F768IM32-B
EFR32MG21A010F768IM32-B by Silicon Labs is a surface mount system on chip (SoC) with 32 terminals. It operates at a voltage range of 1.71V to 3.8V and can withstand temperatures from -40°C to 125°C. This automotive-grade IC is suitable for various applications requiring low power consumption and compact size.
EFR32MG24B210F1536IM48-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Operating Temperature: 125 Cel;
EFR32MG24A010F1536IM48-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Body Material: UNSPECIFIED;
EFR32MG24B020F1536IM40-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Package Style (Meter): CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE;
EFR32MG24B310F1536IM48-B
EFR32MG24B310F1536IM48-B by Silicon Labs is a 48-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, with supply voltage range of 1.71V to 3.8V. Ideal for applications requiring low-profile, surface-mount chips in various electronic devices.
EFR32MG12P432F1024IM48-CR
EFR32MG12P432F1024IM48-CR by Silicon Labs is a System on Chip with 48 terminals, operating at temperatures from -40 to 125°C. It has a supply voltage range of 1.8V to 3.8V and utilizes CMOS technology. This chip is ideal for applications requiring low-profile, surface-mount components in various electronic systems.
EFR32MG24A021F1024IM40-B
EFR32MG24A021F1024IM40-B by Silicon Labs is a 40-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, with supply voltage range of 1.71V to 3.8V. Ideal for applications requiring low-profile, surface-mount chips in various electronic devices.
EFR32BG24B210F1024IM48-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Pitch: .4 mm;
EFR32MG24B120F1536IM48-B
SoC; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
EFR32MG24A010F1536IM40-B
EFR32MG24A010F1536IM40-B by Silicon Labs is a SoC peripheral IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 125°C, with supply voltage ranging from 1.71V to 3.8V. Ideal for applications requiring low-profile and high-temperature performance like IoT devices and wearables.
EFR32MG12P432F1024GM48-CR
EFR32MG12P432F1024GM48-CR by Silicon Labs is a System on Chip with 48 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 1.8V to 3.8V and utilizes CMOS technology. This chip carrier with a very thin profile is suitable for various applications requiring low power consumption and compact design.
EFR32MG12P432F1024IM48-C
SYSTEM ON CHIP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved