Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EFR32BG12P432F1024GM48-C by Silicon Labs is a 48-terminal IC with 3.3V supply voltage, operating at -40 to 85°C. It offers a data rate of 2 Mbps and is ideal for telecom circuit applications due to its compact square chip carrier package style.
Median Price
$12.220
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$7.600
100+ parts
-
1k+ parts
10k+ parts
Symmetry
$8.190
Mouser Electronics
$9.250
$8.570
Newark
$13.770
$9.500
$8.850
Element14
$16.020
$12.150
$11.480
Digiode
$6.948
Nova Conductors
Vyrian
Ampacity Inc.
$6.220
Corphita
$6.583
Corohmni
$7.168
AZTECH Wire
$7.358
Netroflash
Continental Prestige Electronics
$10.790
$7.710
Advanced Electronics
$16.810
$15.297
$13.784
Argo Parts USA
Authorized Procurement Solutions
Surface mount design allows for easy installation and saves space on the PCB, making it a convenient and efficient choice for telecom interface applications.
Square package shape provides uniformity and ease of handling during the manufacturing process, ensuring consistency in product performance.
With 48 terminals, this product offers flexibility in connectivity options, allowing for versatile application in various telecom interface circuits.
High maximum operating temperature ensures reliable performance even in demanding industrial environments, making it a durable and robust choice for telecom applications.
Operating at a nominal supply voltage of 3.3V makes this product energy-efficient and compatible with standard power sources in telecom systems.
With a high data rate of 2 Mbps, this product enables fast and efficient data transfer in telecom applications, enhancing overall system performance.
Other Function Telecom Interface ICs EFR32BG12P432F1024GM48-C attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
EFR32BG12P432F1024GM48-C Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Datasheet Chg 10/Aug/2022 EFR32xG12 01/Feb/2023
PCN Assembly/Origin - EFR32y Assembly Chg 12/Dec/2019
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Telefunken Microelectronics
2N7002
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Diotec Semiconductor Ag
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MAX3799ETJ+T
Maxim Integrated
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MAX24287ETK+T
Microsemi
SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;
ATWILC1000-MR110UB
Microchip Technology
ATWILC1000-MR110UB by Microchip Technology is a surface mount telecom interface IC with 1 function. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 72.2 Mbps. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
WT32I-A-AI6
Silicon Labs
The Silicon Labs WT32I-A-AI6 is a surface mount telecom IC with 50 terminals. It operates in industrial temperature range (-40 to 85°C) and has a compact rectangular package (15.9mm x 23.9mm). Ideal for telecom circuit applications due to its small form factor and no-lead terminal design.
PN7161A1HN/C100E
NXP Semiconductors
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
TLK2711AIRCPR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: HVFQFP; Package Shape: SQUARE;
BLUENRG-M2SP
STMicroelectronics
BLUENRG-M2SP by STMicroelectronics is a 20-terminal telecom IC with 3.3V supply voltage, operating from -40 to 85°C. It comes in a rectangular package style, suitable for industrial applications requiring reliable telecom circuit interfaces. With surface mount capability and compact dimensions of 13.5mm x 11.5mm x 2.5mm, it offers peak reflow temperature of 240°C for efficient assembly processes.
NORA-B101-00B
U-blox Ag
TELECOM CIRCUIT;
WT32I-A-AI6IAP
The Silicon Labs WT32I-A-AI6IAP is a telecom IC with 50 terminals, rectangular package shape, and industrial temperature grade. It is surface mountable and has a microelectronic assembly package style. Ideal for telecom circuit applications with operating temperatures ranging from -40°C to 85°C.
CYBLE-022001-00
Cypress Semiconductor
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3;
BM71BLES1FC2-0B02AA
BM71BLES1FC2-0B02AA by Microchip is a telecom IC with 16 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3V. It is a surface mount rectangular package suitable for industrial applications, offering data rate of 0.0086 Mbps.
CC2640R2FTWRGZRQ1
CC2640R2FTWRGZRQ1 by Texas Instruments is a telecom IC with 48 terminals, operating temperature range of -40 to 105°C, and data rate of 1 Mbps. It is used in industrial applications requiring a supply voltage of 3V, such as telecom circuits needing a compact chip carrier package with matte tin finish.
NEO-M8L-06B
XB3-24AUT-J
Digi International
XB3-24AUT-J by Digi International is a TELECOM CIRCUIT with 1 Mbps Data Rate. Operating Temperature ranges from -40 to 85 °C. It is used in telecom interfaces for various applications due to its RECTANGULAR package shape and SPECIAL SHAPE style.
453-00041R
Laird Technologies
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
AT86RF215IQ-ZUR
Atmel
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
AD73311ARSZ
Analog Devices
AD73311ARSZ by Analog Devices is a 16-bit linear coding telecom IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, with nominal voltage of 3V and max gain tolerance of 1dB. Ideal for telecom circuits, this CMOS technology device features a filter and matte tin terminal finish.
NEO-M8N-0
NEO-M8N-0 by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. Its compact rectangular package measures 12.2mm x 16mm, suitable for industrial applications requiring a 3V supply voltage and AEC-Q100 screening level.
HMC641ALP4ETR
HMC641ALP4ETR by Analog Devices is a telecom interface IC with 24 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial applications. With a nominal negative supply voltage of -3V and terminal pitch of 0.5mm, it is ideal for telecom circuit designs requiring compact and high-performance solutions.
CYBLE-214015-01
CYBLE-214015-01 by Infineon Technologies is a surface mount telecom IC with 1 function and 32 terminals. It has a square package shape, measuring 11mm in width and length, with a max seated height of 1.8mm. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFR32BG22C224F512IM40-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
EFR32BG22C224F512GM40-C
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
EFR32BG22C222F352GM40-C
TELECOM CIRCUIT; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
EFR32BG22C224F512GM32-C
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C224F512IM32-C
EFR32BG22C222F352GM32-C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2;
EFR32BG22C224F512GN32-C
TELECOM CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
EFR32BG22C222F352GN32-C
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e4;
EFR32BG13P632F512GM48-B
EFR32BG13P732F512GM48-B
EFR32BG12P432F1024GM48-B
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
EFR32BG1P332F256GJ43-C0
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 43; Package Code: VFBGA; Package Shape: RECTANGULAR;
EFR32BG21A010F1024IM32-B
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1V132F256GJ43-C0
EFR32BG13P532F512GM48-B
EFR32BG21A010F512IM32-B
EFR32BG21A010F512IM32-B by Silicon Labs is a Telecom IC with 2 Mbps data rate, operating at -40 to 125 °C. It features a square shape, 32 terminals, and automotive temperature grade. Ideal for telecom applications requiring low power consumption and high-speed data transmission.
EFR32BG12P432F1024GL125-B
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
EFR32BG13P732F512GM32-D
EFR32BG13P732F512GM32-D by Silicon Labs is a telecom IC with 48 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and MSL level of 3, suitable for industrial applications requiring a compact chip carrier package with very thin profile and no-lead terminal form.
EFR32BG13P732F512GM48-D
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
EFR32BG1B232F256GJ43-C0
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved