Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SoC;
Median Price
$7.090
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$5.710
100+ parts
-
1k+ parts
10k+ parts
Newark
$6.440
Farnell
$7.740
$5.800
$5.320
Element14
$8.260
$6.410
$6.290
Nova Conductors
$5.700
Mobius Materials
$7.530
$6.060
Digiode
$8.522
Chip Stock
VNN
Vyrian
Ampacity Inc.
$4.170
Aranea Global
$5.586
$5.363
Component Stockers USA
$5.620
$7.060
$5.590
Semicontronic
$6.010
$5.860
$5.830
Corohmni
$6.195
Corphita
$8.073
Aztec Data Supply Inc.
$9.420
Advanced Electronics
$13.389
$12.720
Formix International (Excess)
Infinite Electronics LLP (Excess)
Argo Parts USA
Continental Prestige Electronics
$4.950
Other Function uPs,uCs & Peripheral ICs BGM220PC22WGA2 attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Silicon Labs
Peripheral IC Type:
BGM220PC22WGA2 Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Nexperia
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Sangdest Microelectronics (Nanjing)
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Sensitron Semiconductor
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MCIMX356AVM4B
NXP Semiconductors
MCIMX356AVM4B by NXP Semiconductors is a SYSTEM ON CHIP with 400 terminals, operating temperature range of -40 to 85 °C. It has a supply voltage range of 1.22V to 1.47V and is designed for industrial applications requiring low profile, fine pitch package style.
XC7Z010-1CLG225C
Xilinx
The Xilinx XC7Z010-1CLG225C is a System on Chip with CMOS technology. It operates b/w 0-85°C, with supply voltage range of 0.95-1.05V. Ideal for applications requiring low profile, fine pitch grid array packages in plastic/epoxy material.
XC7Z014S-1CLG400I
XC7Z014S-1CLG400I by Xilinx is a System on Chip with CMOS technology. It operates b/w -40 to 100 °C and has a supply voltage range of 0.95V to 1.05V. With 400 terminals in a low profile, fine pitch grid array package, it's ideal for various applications requiring high-performance processing capabilities.
MTFC4GLDDQ-4MIT
Micron Technology
MTFC4GLDDQ-4MIT by Micron Technology is a CMOS MICROPROCESSOR CIRCUIT with 100 terminals in a GRID ARRAY, LOW PROFILE package. It operates b/w -40 to 85 °C with supply voltage range of 2.7V to 3.6V, making it ideal for industrial applications requiring high performance and reliability.
XC7Z007S-1CLG400C
The Xilinx XC7Z007S-1CLG400C is a System on Chip with CMOS technology. It operates b/w 0-85°C, with supply voltage range of 0.95-1.05V. Featuring a grid array package style, it's ideal for applications requiring low profile and fine pitch designs in the Other Function uPs,uCs & Peripheral ICs category.
MCIMX6U8DVM10AC
MCIMX6U8DVM10AC by NXP Semiconductors is a System on Chip with 624 terminals, operating at 0-95°C. It has a low profile grid array package style and uses CMOS technology. Ideal for applications requiring high performance in compact designs.
FT245BL-T/R
FTDI
FT245BL-T/R by FTDI is a 32-terminal peripheral IC with a supply voltage range of 4.35V to 5.25V. It operates in temperatures from 0°C to 70°C, making it suitable for commercial applications requiring a microprocessor circuit with CMOS technology. The package style is flatpack, low profile, and it features gull wing terminal form for easy surface mounting at a compact size of 7mm x 7mm.
MIMX8MM5DVTLZAA
The NXP Semiconductors MIMX8MM5DVTLZAA is a low-profile, fine-pitch SoC with 486 terminals. Operating b/w 0-95°C, it has a supply voltage range of 0.95-1.05V and peak reflow temperature of 260°C. Ideal for applications requiring high-performance computing in compact spaces.
MCIMX7D7DVM10SC
MCIMX7D7DVM10SC by NXP Semiconductors is a SYSTEM ON CHIP with 541 terminals, operating b/w 0-95°C. It has a supply voltage range of 1.045-1.25 V and uses BALL terminal form. Ideal for applications requiring low profile, fine pitch grid arrays in plastic/epoxy packages.
SE050B2HQ1/Z01SFZ
SE050B2HQ1/Z01SFZ by NXP Semiconductors is a cryptographic authenticator IC with CMOS technology. It operates b/w -40 to 105 °C and has a supply voltage range of 1.62V to 3.6V, making it ideal for industrial applications requiring secure authentication.
MSP430F67791AIPZR
Texas Instruments
MSP430F67791AIPZR by Texas Instruments is a 16-bit microprocessor circuit with 6 ADC channels and 3 DMA channels. It has a max clock frequency of 0.032768 MHz and is commonly used in industrial applications requiring low power consumption.
EFR32MG21A020F1024IM32-B
Silicon Labs
EFR32MG21A020F1024IM32-B by Silicon Labs is a 32-terminal, CMOS System on Chip with a supply voltage range of 1.71V to 3.8V. Ideal for automotive applications, it operates b/w -40°C to 125°C and features a compact square package style with matte tin finish for surface mount assembly.
ATWINC1500B-MU-Y
Microchip Technology's ATWINC1500B-MU-Y is a 40-terminal chip carrier with a clock frequency of 48 MHz. Ideal for industrial applications, it operates b/w -40 to 85 °C and supports network controller technology. With a supply voltage range of 2.7V to 3.6V, this CMOS device is surface mountable and has a terminal pitch of 0.4 mm.
NRF52805-CAAA-R
Nordic Semiconductor Asa
NRF52805-CAAA-R by Nordic Semiconductor Asa is a 28-terminal SoC with CMOS technology. It operates b/w -40 to 85 °C, with supply voltage range of 1.7V to 3.6V. Ideal for applications requiring a compact GRID ARRAY package with very thin profile and fine pitch terminals.
ATWINC3400-MR210CA122
ATWINC3400-MR210CA122 by Microchip Technology is a surface mount microprocessor circuit with 37 terminals. It operates at a supply voltage range of 3V to 4.2V and can withstand temperatures from -40°C to 85°C. This industrial-grade IC is commonly used in various applications requiring wireless connectivity.
DS2413P/T&R
Maxim Integrated
DS2413P/T&R by Maxim Integrated is a small outline peripheral IC with 6 terminals, operating at 0-70°C. It has a supply voltage range of 2.8-5.25V and is ideal for microprocessor circuits in commercial-grade applications.
MIMXRT1061CVL5B
NXP Semiconductors' MIMXRT1061CVL5B is a SoC with CMOS technology, featuring 196 terminals in a low-profile grid array package. Operating b/w -40 to 105°C, it has a supply voltage range of 1.15-1.26V and peak reflow temp of 260°C. Ideal for applications requiring high-performance microcontrollers in compact form factors.
AM4376BZDN80
AM4376BZDN80 by Texas Instruments is a System on Chip with 491 terminals in a low profile, fine pitch grid array package. It operates b/w 0-90°C, with supply voltage range of 1.21-1.326V. Ideal for applications requiring high performance and compact design.
P82B715D
The Texas Instruments P82B715D is an 8-terminal IC with a clock frequency of 0.4 MHz, operating b/w -40 to 85°C. It is an I2C-compatible microprocessor circuit suitable for industrial applications requiring a supply voltage range of 4.5V to 12V in a small outline package.
XC7Z010-3CLG225E
The Xilinx XC7Z010-3CLG225E is a System on Chip with CMOS technology. It operates b/w 0-100°C, with supply voltage range of 0.95-1.05V. This low profile chip in a grid array package is ideal for various applications requiring high performance and compact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGM220PC22HNA2
BGM220
Other uPs/uCs/Peripheral ICs;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved