Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; JESD-30 Code: R-PDSO-G4;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF Small Signal Bipolar Junction Transistors (BJT) NE661M05FB attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Renesas Electronics
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Highest Frequency Band:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
NE661M05FB Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Weitron Technology
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Taitron Components
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BFS17
ROHM
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .05 A;
MPS918RLRM
MPS918RLRM by Onsemi is an NPN RF BJT transistor with a max fT of 600 MHz. It operates at a max temp of 150 °C and has a max Vce of 15V, making it suitable for ultra-high frequency amplifier applications. The package style is cylindrical with through-hole terminals and a plastic/epoxy body material.
55GN01FA
55GN01FA by Onsemi is a NPN BJT transistor with 3 terminals, suitable for amplifier applications in the UHF band. It has a max power dissipation of 0.25W, hFE of 100, and fT of 5500MHz. The package is small outline plastic/epoxy with dual terminal position and can operate up to 150 °C.
BFY90
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1300 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .025 A;
HFA3127RZ
Integrated Device Technology
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Minimum DC Current Gain (hFE): 40;
2N2369A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): .36 W; Maximum Collector Current (IC): .2 A;
934063132115
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Collector Current (IC): .025 A; JESD-30 Code: R-PDSO-G3;
SD1219-5
STMicroelectronics
NPN; Surface Mount: NO; Transistor Element Material: SILICON;
BFQ19SH6327XTSA1
Infineon Technologies
Infineon's BFQ19SH6327XTSA1 is a NPN BJT transistor for L Band applications. With max fT of 5500 MHz, it has VCE of 15V and IC of 0.21A. This single configuration transistor operates b/w -65°C to 150°C, making it suitable for amplifier circuits in RF applications.
EC3H02BA
The Onsemi EC3H02BA is an NPN RF BJT with a single configuration, suitable for surface mount applications. It features a max power dissipation of 0.1W, min DC current gain of 120, and max operating temp of 150 °C. Ideal for high-frequency circuits up to 5000MHz requiring low collector current at 0.07A.
BFR92AW
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
2N5179
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1400 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .05 A;
BF959
BF959 by Onsemi is a NPN RF BJT transistor with 3 terminals. It operates in the very high frequency band up to 700 MHz, ideal for amplifier applications. With a max power dissipation of 0.625W and max collector current of 0.1A, it can handle various signal amplification tasks efficiently.
CA3083M96
Intersil
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G16;
MCH4009-TL-H
RF Small Signal Bipolar Transistors; Terminal Finish: TIN BISMUTH; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e6; Peak Reflow Temperature (C): 260;
2SC3838KT146P
ROHM 2SC3838KT146P is an NPN BJT transistor with max VCEsat of 0.5V, fT of 3200MHz, and hFE of 82. Ideal for S Band applications, this transistor is a single configuration amplifier in a small outline package suitable for surface mount technology.
MMPQ2369R1
MMPQ2369R1 by Onsemi is a NPN BJT with 4 elements, ideal for amplifier applications. It features a max fT of 550 MHz, VCE of 15V, and IC of 0.5A. The transistor comes in a small outline package with Gull Wing terminals for surface mount assembly.
934063122215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1500 MHz; Maximum Collector Current (IC): .1 A; Transistor Application: SWITCHING;
15GN01CA-TB-E
RF Small Signal Bipolar Transistors; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6;
MMBTH10LT1
MMBTH10LT1 by Onsemi is an NPN RF BJT transistor with a max operating temp of 150°C. It has a transition frequency of 650 MHz and a collector-emitter voltage of 25V, making it ideal for ultra-high frequency amplifier applications in small outline packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NE662M04-T2-A
Nec Electronics America
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; JESD-30 Code: R-PDSO-F4;
Nec Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .035 A; Transistor Element Material: SILICON;
NE661M05
Renesas Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Power Dissipation (Abs): .039 W; Maximum Collector Current (IC): .012 A;
NE661M05-A
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .039 W; Maximum Collector Current (IC): .012 A; No. of Elements: 1; Minimum DC Current Gain (hFE): 50;
NE661M05-FB-A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Highest Frequency Band: L BAND;
NE661M05-T1
NE661M05-T1-A
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .039 W; Maximum Collector Current (IC): .012 A; Minimum DC Current Gain (hFE): 50; No. of Elements: 1;
NE661M05-T1FB
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; JESD-30 Code: R-PDSO-F4;
NE661M05-T1FB-A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Terminal Finish: TIN BISMUTH;
NE662M03
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .115 W; Maximum Collector Current (IC): .035 A; Maximum Operating Temperature: 150 Cel;
NE662M03-FB
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 21000 MHz; Maximum Collector Current (IC): .035 A; Terminal Position: DUAL;
NE662M03-FB-A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 21000 MHz; Maximum Collector Current (IC): .035 A; Terminal Finish: TIN BISMUTH;
NE662M03-T1
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .115 W; Maximum Collector Current (IC): .035 A; Minimum DC Current Gain (hFE): 60;
NE662M03-T1FB
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 21000 MHz; Maximum Collector Current (IC): .035 A; Terminal Form: FLAT;
NE662M03-T1FB-A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 21000 MHz; Maximum Collector Current (IC): .035 A; Transistor Element Material: SILICON;
NE661M05FB
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; JESD-609 Code: e0;
Nec Compound Semiconductor Devices
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Transistor Application: AMPLIFIER;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Terminal Form: FLAT;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .012 A; Package Style (Meter): SMALL OUTLINE;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved