Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Maximum Access Time: 25 ns;
Median Price
$14.500
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$12.603
1k+ parts
$11.679
10k+ parts
-
Mouser Electronics
$12.060
$11.100
Renesas
$15.400
$12.422
$11.148
Native Components
$1.455
Northwest PG Solutions
$1.601
Microchip USA
$36.286
Perfect Parts
FIFO 72V02L25JGI attributes and parameters. Explore more FIFO devices from Renesas Electronics
Maximum Access Time:
Cycle Time:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Output Enable:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Standby Current:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
72V02L25JGI Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
PCN Design/Specification - All Dev Label Chg 1/Dec/2022
PCN Assembly/Origin - Alternate Assembly Facility 14/Apr/2016
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1554216002
Molex
WIRE AND CABLE;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Micro Commercial Components
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148WT
Bytesonic Electronics
Tak Cheong Electronics Holdings
72V255LA15PFGI8
Integrated Device Technology
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Width: 14 mm;
IDT7208L25JGI8
Renesas Electronics
The Renesas Electronics IDT7208L25JGI8 is a FIFO chip with 64KX9 organization, operating at 35ns cycle time. It features asynchronous mode, CMOS technology, and parallel interface. Ideal for industrial applications requiring fast data storage and retrieval in a compact 32-terminal chip carrier package.
7202
Teledyne E2v (Uk)
FIFOs;
72V3650L6PFG8
The Renesas Electronics 72V3650L6PFG8 FIFO operates synchronously with a cycle time of 6 ns and clock frequency up to 166 MHz. It has an organization of 2KX36, suitable for applications requiring fast data processing such as networking equipment and telecommunications systems. With a low profile flatpack package style, it offers parallel operation with output enable functionality.
72V251L15PFGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Terminal Form: GULL WING;
SN74ACT7206L-15NP
SN74ACT7206L-15NP by Texas Instruments is a 16KX9 FIFO with 25ns cycle time, 40MHz clock frequency, and 147456-bit memory density. It operates at 5V, has a temperature range of 0-70°C, and is ideal for parallel data storage applications.
IDT72801L15PF
IDT72801L15PF by Integrated Device Technology is a FIFO memory with 256x9 organization, operating at 66.7 MHz clock frequency and 15 ns cycle time. Suitable for commercial applications, it features synchronous operation, parallel interface, and low profile flatpack package style.
SN74ACT2227DW
SN74ACT2227DW by Texas Instruments is a FIFO memory IC with 64x1 organization, operating at 5V. It features a cycle time of 16.67ns and max clock frequency of 22MHz, suitable for industrial applications requiring fast data storage and retrieval. With synchronous operation and output enable functionality, it offers reliable performance in various electronic systems.
CD74HC40105M
Thomson Consumer Electronics
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: NICKEL PALLADIUM GOLD;
QS7201-35V
QS7201-35V by Integrated Device Technology is a FIFO memory IC with 512x9 organization and 512 words code. It operates asynchronously at a max clock frequency of 22.22 MHz and has a max access time of 35 ns. This small outline package is commonly used in applications requiring fast data storage and retrieval.
SN74ABT3611-15PQ
SN74ABT3611-15PQ by Texas Instruments is a 64x36 FIFO with 15ns cycle time, operating at 66.7MHz clock frequency. It has a memory density of 2304 bit and supports parallel operation. This device is ideal for applications requiring fast synchronous data transfer in commercial temperature environments.
SN74ACT3632-15PCBR
SN74ACT3632-15PCBR by Texas Instruments is a FIFO with 512x36 organization, 15 ns cycle time, and operates at 5V. It is used in applications requiring fast data transfer and storage, such as networking equipment and communication systems.
SN74ABT3612-15PQ
SN74ABT3612-15PQ by Texas Instruments is a FIFO with 64x36 organization, 15 ns cycle time, and 66.7 MHz max clock frequency. It is used in applications requiring fast synchronous operation and 3-STATE output characteristics, suitable for commercial temperature grades.
SN74ACT2229DL
SN74ACT2229DL by Texas Instruments is a FIFO memory IC with 512x1 organization, operating at 5V. It features synchronous operation, small outline package style, and industrial temperature grade suitability. Ideal for applications requiring fast access times and low standby current consumption.
SN74ACT3642-15PCBR
SN74ACT3642-15PCBR by Texas Instruments is a FIFO with 1KX36 organization, 15 ns cycle time, and 5V nominal voltage. It is used in applications requiring fast synchronous operation and 3-STATE output characteristics.
SN74ACT3632-20PCB
SN74ACT3632-20PCB by Texas Instruments is a FIFO memory IC with 512x36 organization, operating at 20 ns cycle time and 50 MHz clock frequency. It features a low profile flatpack package suitable for commercial temperature grade applications.
IDT72V243L6BCG
IDT72V243L6BCG by Renesas Electronics is a 2Kx18 FIFO with a cycle time of 6ns. It operates in synchronous mode and has a max clock frequency of 166MHz. This memory IC type is commonly used in applications requiring high-speed data buffering and storage.
IDT7202LA25PI
IDT7202LA25PI by Integrated Device Technology is a FIFO memory with 1KX9 organization, 35 ns cycle time, and 28.5 MHz clock frequency. It operates in asynchronous mode and is suitable for industrial applications requiring fast data storage and retrieval. The memory IC type is Other FIFO with a memory density of 9216 bit, making it ideal for high-speed parallel data processing tasks.
7204L15J8
7204L15J8 by Integrated Device Technology is a FIFO chip carrier with 4Kx9 organization, operating at 40MHz clock frequency. It has a cycle time of 25ns and can be used in commercial applications requiring fast asynchronous memory access.
CD54HCT40105F3A
CD54HCT40105F3A by Texas Instruments is a 16x4 FIFO with 100ns cycle time, operating at 5V. It has a max clock frequency of 10MHz and is suitable for military-grade applications requiring synchronous operation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
72V05L25JGI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Organization: 8KX9;
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Cycle Time: 35 ns;
72V05L25JGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; No. of Functions: 1;
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Memory Width: 9;
72V02L15JG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Maximum Seated Height: 2.79 mm;
72V05L15JG
The Renesas Electronics 72V05L15JG is a FIFO chip with 8Kx9 organization, operating at 3.3V. It features a cycle time of 25ns and max access time of 15ns, suitable for applications requiring fast data processing in commercial-grade environments. The chip is designed in CMOS technology with parallel interface, making it ideal for high-speed memory applications.
FIFOs; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; JESD-30 Code: R-PQCC-J32;
72V02L25JGI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Memory Density: 9216 bit;
72V01L35JGI
72V02L35JG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Cycle Time: 45 ns;
72V01L35JG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Terminal Position: QUAD;
72V02L35JG
72V01L25JG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
72V01L25JGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
72V01L35JGI8
72V02L35JGI
72V01L25JGI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Maximum Standby Current: .005 Amp;
72V02L15JG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCN; Package Shape: RECTANGULAR; Operating Mode: ASYNCHRONOUS;
72V02L25JGI
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved