Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: R-PSIP-W3; Highest Frequency Band: VERY HIGH FREQUENCY BAND; No. of Terminals: 3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
RF Small Signal Field Effect Transistors (FET) 2SK521-E attributes and parameters. Explore more RF Small Signal Field Effect Transistors (FET) devices from Renesas Electronics
Configuration:
Maximum Drain Current (ID):
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
Highest Frequency Band:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
2SK521-E Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Starsea Electronics
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
ATF-55143-TR1
Broadcom
Broadcom's ATF-55143-TR1 is an N-channel RF FET with 15.5 dB power gain, ideal for amplifier applications in C band frequencies. It features a 5V DS breakdown voltage, 0.1A drain current, and operates in enhancement mode. The transistor has a small outline package with gull wing terminals and can handle up to 0.27W power dissipation at 150°C ambient temperature.
2SK1240
N-CHANNEL; Maximum Drain Current (ID): .06 A; Maximum Power Dissipation Ambient: .18 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): .06 A;
BF998RT/R
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: AMPLIFIER;
2N4221
Texas Instruments
2N4221 by Texas Instruments is an N-CHANNEL RF FET with 30V DS Breakdown Voltage. Ideal for SWITCHING applications, it operates in DEPLETION MODE with 0.3W Power Dissipation and 200°C Max Temp. Features include 4 terminals, JUNCTION tech, and 2pF Feedback Capacitance.
BLF6G21-10
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 225 Cel; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
J309RL1
J309RL1 by Onsemi is an N-CHANNEL RF FET with a 25V DS Breakdown Voltage, ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND. Featuring DEPLETION MODE operation, this transistor has a Max Operating Temperature of 125 °C and a Crss of 2.5 pF, housed in a CYLINDRICAL package with THROUGH-HOLE terminals.
MPF102RL
MPF102RL by Onsemi is an N-CHANNEL RF FET with a 25V DS Breakdown Voltage, ideal for AMPLIFIER applications. Operating in DEPLETION MODE, it offers a VERY HIGH FREQUENCY BAND and features a Max Operating Temperature of 125 °C. This THROUGH-HOLE transistor has 3 terminals and a Max Feedback Capacitance of 3pF.
A5T3823
A5T3823 by Texas Instruments is an N-CHANNEL RF FET with 30V DS Breakdown Voltage, ideal for AMPLIFIER applications in VERY HIGH FREQUENCY BAND. Featuring SINGLE configuration, 0.3W power dissipation, and DEPLETION MODE operation up to 150°C, it offers high performance in a CYLINDRICAL package.
BF981
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: DUAL GATE, DEPLETION MODE; JESD-30 Code: O-PRDB-F4;
2N5486RLRPG
2N5486RLRPG by Onsemi is an N-CHANNEL RF FET with a power gain of 10 dB, ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND. It has a max power dissipation of 0.31 W and operates in DEPLETION MODE at up to 150 °C, featuring a JUNCTION technology and SILICON element material.
BLM7G1822S-80ABG
RF Small Signal Field-Effect Transistors;
NE3515S02-T1C-A
NE3515S02-T1C-A by Renesas Electronics is a RF Small Signal FET with N-CHANNEL configuration. It has a min DS Breakdown Voltage of 3V and operates in DEPLETION MODE. This transistor is commonly used as an amplifier in the KU BAND frequency range.
BLF521
The NXP Semiconductors BLF521 is an N-CHANNEL RF FET with 40V DS breakdown voltage and 10dB power gain. Ideal for AMPLIFIER applications in the ULTRA HIGH FREQUENCY BAND, it features a 1A max drain current and operates at up to 200°C.
BF989
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Case Connection: SOURCE; Package Shape: RECTANGULAR;
BF901-TAPE-13
BF901-TAPE-13 by NXP Semiconductors is an N-channel RF FET designed for amplifier applications. It features a 12V min DS breakdown voltage, operates in the ultra-high frequency band, and supports dual gate enhancement mode. This compact surface mount device ensures reliable performance up to 150 °C.
3SK168
3SK168 by Onsemi is an N-CHANNEL RF FET with max drain current of 0.055A and power dissipation of 0.25W. Ideal for applications requiring small signal amplification in high-frequency circuits, such as RF receivers and transmitters. Operating temp up to 125 °C ensures reliable performance in various environments.
BF511,215
BF511,215 by NXP Semiconductors is an N-CHANNEL RF FET with a DEPLETION MODE. It operates in the VERY HIGH FREQUENCY BAND and has a max power dissipation of 0.25 W. Ideal for AMPLIFIER applications due to its small outline package style and GULL WING terminal form.
BF998WR,115
NXP Semiconductors' BF998WR,115 is an N-CHANNEL RF FET with a built-in diode for AMPLIFIER applications. Operating in DEPLETION MODE, it offers a max drain current of 0.03A and operates in the ULTRA HIGH FREQUENCY BAND. With a package style of SMALL OUTLINE, it can handle up to 150°C operating temperature.
FLU17XM
Fujitsu Semiconductor America
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Case Connection: SOURCE; No. of Elements: 1;
934009000215
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Highest Frequency Band: VERY HIGH FREQUENCY BAND; Package Shape: RECTANGULAR; JEDEC-95 Code: TO-236AB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SK544D
The Onsemi 2SK544D is an N-CHANNEL RF FET with a max drain current of 0.03A, operating in DEPLETION MODE for AMPLIFIER applications. It features a METAL-OXIDE SEMICONDUCTOR technology and operates in the VERY HIGH FREQUENCY BAND, making it suitable for high-frequency signal amplification in various electronic devices.
2SK544F
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Terminals: 3; Maximum Drain Current (ID): .03 A; No. of Elements: 1;
2SK544E
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Terminals: 3; Package Style (Meter): IN-LINE; Additional Features: LOW NOISE;
2SK54
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Qualification: Not Qualified; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): CYLINDRICAL;
2SK522TZ
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain Current (ID): .02 A; Minimum DS Breakdown Voltage: 30 V; Package Body Material: PLASTIC/EPOXY;
2SK522ERF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Highest Frequency Band: VERY HIGH FREQUENCY BAND; Package Body Material: PLASTIC/EPOXY; Operating Mode: DEPLETION MODE;
2SK521-C
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: R-PSIP-W3; Maximum Feedback Capacitance (Crss): .6 pF; Qualification: Not Qualified;
2SK522ERR
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: R-PSIP-T3; No. of Terminals: 3; Transistor Element Material: SILICON;
2SK522
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Elements: 1; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PSIP-T3;
2SK522ETZ
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Minimum Power Gain (Gp): 20 dB; Terminal Form: THROUGH-HOLE; Maximum Drain Current (ID): .02 A;
2SK522FRF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Operating Mode: DEPLETION MODE; No. of Terminals: 3;
2SK522RR
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Package Style (Meter): IN-LINE; Package Body Material: PLASTIC/EPOXY; No. of Terminals: 3;
2SK522DTZ
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Field Effect Transistor Technology: JUNCTION; Transistor Element Material: SILICON;
2SK522DRF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Transistor Element Material: SILICON; Terminal Form: THROUGH-HOLE; No. of Elements: 1;
2SK522FRR
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: R-PSIP-T3; No. of Elements: 1; No. of Terminals: 3;
2SK522FTZ
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSIP-T3; Transistor Element Material: SILICON;
2SK521
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Field Effect Transistor Technology: JUNCTION; Package Style (Meter): IN-LINE; Operating Mode: DEPLETION MODE;
2SK521-D
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: WIRE; Transistor Element Material: SILICON; Qualification: Not Qualified;
2SK522DRR
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Transistor Element Material: SILICON; Terminal Form: THROUGH-HOLE; Operating Mode: DEPLETION MODE;
Hitachi
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .15 W; No. of Elements: 1; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved