Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VEC2315-TL-W by Onsemi is a P-CHANNEL FET with 2 elements and built-in diode, ideal for amplifier applications. It features a 60V DS breakdown voltage, 0.137 ohm max RDS(on), and 2.5A max ID. This small outline transistor operates in enhancement mode at up to 150 °C, making it suitable for various electronic circuits.
Median Price
$0.288
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.239
10k+ parts
$0.213
Flip Electronics
$0.160
Digiode
$0.258
Vyrian
Chip Stock
Corphita
$0.245
Corohmni
$0.272
AZTECH Wire
$4.180
$4.010
$3.930
$3.860
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Kulean Microsystems
Problanco Electronics
TANS Electronics
UHIMA Technologies
SupplyDigital Components
Plastic/Epoxy package body material provides good insulation and protection for the transistor, ensuring reliable operation over time.
P-channel transistors are known for their low on-state resistance and high input impedance, making them suitable for high-speed switching applications.
Having 2 separate elements with built-in diode allows for more versatile circuit configurations and better performance in certain applications.
Designed specifically for amplifier applications, ensuring high gain and low noise performance.
Surface mount capability makes for easy and efficient PCB assembly, reducing overall production costs.
With a minimum breakdown voltage of 60V, this transistor can handle higher voltage applications without risk of damage.
With a maximum power dissipation of 1W, this transistor can handle moderate power levels and operate reliably under normal conditions.
Capable of handling up to 2.5A of drain current, making it suitable for medium power applications.
Low drain-source on resistance (RDS(on)) of 0.137 ohms results in minimal power loss and improved efficiency.
With a maximum operating temperature of 150 °C, this transistor can withstand high-temperature environments and maintain stable performance.
Small Signal Field Effect Transistors (FET) VEC2315-TL-W attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
VEC2315-TL-W Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
BSS138NL6327
BSS138NL6327 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.23A drain current, and 3.5 ohm on-resistance. Ideal for small outline applications requiring a single transistor with built-in diode in enhancement mode operation. Suitable for use in automotive electronics due to AEC-Q101 reference standard compliance.
IRF9310TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Pulsed Drain Current (IDM): 160 A; Qualification: Not Qualified;
FDN5630
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Application: SWITCHING; Moisture Sensitivity Level (MSL): 1;
2N7002PW
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Transistor Element Material: SILICON; Peak Reflow Temperature (C): 260;
BSS84AKS,115
NXP Semiconductors
NXP Semiconductors' BSS84AKS,115 is a P-CHANNEL FET with 50V DS breakdown voltage and 0.16A max drain current. Ideal for switching applications, it features a built-in diode, GULL WING terminals, and operates in enhancement mode.
SI2300DS-T1-GE3
Vishay Intertechnology
SI2300DS-T1-GE3 by Vishay Intertechnology is a N-channel FET with 30V DS breakdown voltage and 3.6A max drain current. Ideal for switching applications, it operates in enhancement mode with a built-in diode, offering 0.068 ohm max on-resistance and 19pF feedback capacitance.
2N7002BKS,115
NXP Semiconductors' 2N7002BKS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.3A ID. Ideal for switching applications, it operates in enhancement mode with 1.6 ohm RDS(on). The small outline package features gull wing terminals and can withstand temperatures from -55 to 150 °C.
FDS4685
FDS4685 by Onsemi is a P-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 8.2A and an Operating Temperature up to 150°C. With a small outline package style and surface mount capability, it offers high performance in compact designs.
BSS138W
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 150 Cel;
2N7002BK,215
NXP Semiconductors' 2N7002BK,215 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.35A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 1.6 ohm RDS(on) and -55 to 150 °C temp range.
FDN337N
Onsemi's FDN337N is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max ID of 2.2A, 0.065 ohm Drain-Source On Resistance, and operates in ENHANCEMENT MODE. The PLASTIC/EPOXY package with GULL WING terminals can handle up to 150°C temperature, making it suitable for various electronic devices.
BC548B
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 150 Cel;
2N7000BU
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; JESD-609 Code: e3; Operating Mode: ENHANCEMENT MODE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FDV301N-NB9V005
FDV301N-NB9V005 by Fairchild Semiconductor is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.5A Drain Current, and 4 ohm On Resistance. Ideal for SWITCHING applications in small outline packages with -55 to 150 °C operating temperature range.
BSS84
Continental Device India
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; JEDEC-95 Code: TO-236AB; Terminal Finish: MATTE TIN;
SI2302CDS-T1-GE3
SI2302CDS-T1-GE3 by Vishay Intertechnology is a N-channel FET for switching applications. It features 20V DS breakdown voltage, 2.6A max drain current, and 0.057ohm max on-resistance. With a small outline package and operating up to 150°C, it's ideal for compact electronic devices requiring efficient power management.
NTR5103NT1G
NTR5103NT1G by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.26A drain current, and 2.5 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.42W at 150°C.
FDS4435BZ
FDS4435BZ by Onsemi is a P-CHANNEL FET with 30V DS Breakdown Voltage and 8.8A Drain Current. Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation, 0.02 ohm On Resistance, and 345pF Feedback Capacitance.
2N7002K
2N7002K by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 2 ohm RDS. Ideal for SWITCHING applications in ENHANCEMENT MODE, it features GULL WING terminals and operates b/w -55 to 150 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VEC2315-TL-H
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Transistor Application: AMPLIFIER; Terminal Form: FLAT;
VEC2415-TL-E
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
VEC2415-TL-W
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
VEC2616-TL-H
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON;
VEC2616-TL-W
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Minimum DS Breakdown Voltage: 60 V; No. of Elements: 2;
VEC2315
Sanyo Semiconductor
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; JESD-30 Code: R-PDSO-F8; No. of Elements: 2;
VEC2607
Sanyo Electric
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Drain Current (ID): 4.5 A; Package Style (Meter): SMALL OUTLINE;
VEC2612
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Drain Current (Abs) (ID): 3 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
VEC2302
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
VEC2402
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): 4 A;
VEC2307
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
VEC2303
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Transistor Element Material: SILICON; No. of Elements: 2;
VEC2403
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Drain Current (ID): 4 A; Terminal Form: FLAT;
VEC2408
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; No. of Terminals: 8; Terminal Position: DUAL;
VEC2606
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Operating Temperature: 150 Cel; Minimum DS Breakdown Voltage: 60 V;
VEC2301
VEC2415
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved